Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Spl Repair To Roof Of Bldg No P-110, P-111 And T-112a Off 201 Engr Regt And Other Sanctioned Works Under Age B/r-ii Of Ge (east) Jalandhar Cantt in Jalandhar, Punjab, with an estimated contract value of Rs. 44,90,000. The bid opening date for this tender is 10-11-2026 and the last date for bid submission is 23-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Punjab Tender
Opening Date10 Nov 2026
Closing Soon23 Nov 2026
Tender Amount₹ 44,90,000
Costs
EMD
₹ 89,800Document Cost
₹ 500Tender Fee
Refer Documents
Description
Spl Repair To Roof Of Bldg No P-110, P-111 And T-112a Off 201 Engr Regt And Other Sanctioned Works Under Age B/r-ii Of Ge (east) Jalandhar Cantt
Contact
Tender Id
2026_MES_791221_2Tender No
GE/JULL/ET-62/2026-27Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment of FE 410-W (Gde-E-250) quality B, complete all as specified and as directed.
200
-
-
... More
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
3500
-
-
... More
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
500
-
-
... More
S&F MSA Flat wind ties for roof including securing bolts, posts and struts including all necessary drilling bolt or riveting etc and similar work confirming to FE-290 Gde E-165, complete all as specified and as directed.
6700
-
-
... More
Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.
10
-
-
... More
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius in CM 1:6, complete all as specified and as directed.
10
-
-
... More
M&L 15mm thick cement plaster in cement mortar 1:4 on external surface brick or concrete surface finished even and fairall, complete all as specified and as directed.
200
-
-
... More
Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each complete all as specified and as directed.
24
-
-
... More
M&L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in tili adhesiveis (as per IS-4517) a premium polymer-integrated cement-based adhesive designed for strong, durable, and hassle-free tile installation. in roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust, complete all as specified and as directed as per manufacturer's instructions.
20
-
-
... More
M&L for coloured glazed tiles of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. .
20
-
-
... More
S&F Steel Window/Ventilator 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed and gauzed skelton shutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWRR box type T- section of size 60 mm x 25 mm and 1.25 mm thick including taking out old windows and cuttings holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including gauged shutters with sash bars and glasses and wire mesh fixed in all panes and also include the following fittings welded to shutters (a) Hold fasts 150 mm long of 12 mm x 3 mm made to shape-04 nos per window. (b) Handle of Z sec 20 mm x 25 mm, 100 mm long-1 Nos of leaf (c) MS tower bolt 150 mm long 02 Nos per leaf. (d) Z sec 20 mm x 25 mm , 100 long of hollow square 15 mm x 20 mm x 63 mm welded to hinges – 01 Nos per leaf (f) MS pintal hinges of size 75mm x 12 mm -02 Nos per leaf (g) Fabrication and fixing arrangement as per drawing No CEJZ/ TD -06/07 including necessary (wire mesh/glass panes)fittings, complete all as specified and as directed.
34.56
-
-
... More
M&L for prepration of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed.
34.56
-
-
... More
M&L preparation of new steel surfaces of any descriplain, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer, complete all as specified and as directed.
300
-
-
... More
Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in hard dense soil, complete all as specified and as directed.
125
-
-
... More
Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m depth and getting out in hard dense soil, complete all as directed.
63
-
-
... More
M&L for providing cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in foundation, bed blocks,filling and mass concrete, complete all as specified and as directed.
27
-
-
... More
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete.
7.88
-
-
... More
M&L for Brickwork with Modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, forming toothing for, and bonding new into old brickwork /stone masonry, complete all as specified and as directed.
70
-
-
... More
M&L Rendering 15mm thick in CM (1:4) on fair face of brick/concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.
500
-
-
... More
Supply only chain link fencing, MS galvanised of any size and type, complete all as specified and as directed.
2500
-
-
... More
Fixing only chain lnk fencing including line wires, any mesh, size, any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed Note : chain link fencing shall be measured and paid separately as " supply only"
600
-
-
... More
Preparing new or previously untreated steel surface of any description, over 10 cm in width or girth not other wise described and appying two coats of synthetic enamel paint over red oxide primer, complete all as specified and as directed.
150
-
-
... More
S&F fixed 5 to 10 mm dia Mild steel screws bolts(Machine made)with hexagonal or square heads at one end and screwed both ends ,each screwed end to be fitted with washers and one hexagonal or squre nut, lentg of bolt exc 5cm and n.exc 10cm long with washers, complete all as specified and as directed.
200
-
-

