Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repair To Bldg No Pn-703 (a To H) Or Md Accn At Faridkot Mil Stn in Faridkot, Punjab, with an estimated contract value of Rs. 55,99,000. The bid opening date for this tender is 03-11-2026 and the last date for bid submission is 17-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Punjab Tender

Opening Date3 Nov 2026
Closing Soon17 Nov 2026
Tender Amount₹ 55,99,000 
Notes
Download

Costs

Description

Special Repair To Bldg No Pn-703 (a To H) Or Md Accn At Faridkot Mil Stn

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant density 750 kg/cum and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

120

-

-

... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant density 750 kg/cum and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

76

-

-

... More
S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge. (Note : stainless steel butt hinges shall be paid seperately)

50.4

-

-

... More
S&F factory made single extruded WPC (Wood polymer composite) solid decorative type wire mesh door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, Door to be panelled with SS mosquito mesh and XPN aluminium mesh for additional strength and safety purpose. (confirming to IS : 4020)all as per direction of Engineer-in-charge. (Note : (a) stainless steel butt hinges shall be paid seperately (b) SS wire mesh and XPN aluminium mesh shall deemed to be incl in quoted rates. (c) Door should be one piece construction and opening for wire mesh to be made by CNC wood cutting machine.

36

-

-

... More
S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge. (Note : stainless steel butt hinges shall be paid seperately)

19.2

-

-

... More
S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.0 mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charge

153.6

-

-

... More
S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.0 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one No of locking arrangement two nos Handle etc and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer all as per Godrej pattern complete all as specified and directed by Engr-in-charge Note : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion) (ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same.

53.76

-

-

... More
M & L for fabricating & fixing modular kitchen ( kitchen cabinet bottom unit , over head wall unit , loft unit etc) made out of 18-20mm thick both side pre laminated decorative WPC board , minimum density 600kg/Cum. Including fixing with solvent cement adhesive and screws to form cabinet, shelves, wardrobe, drawers and other accessories in modular kitchen cabinet / cupboard shutters and fixing to wall using rawl plug. to ready made fittings with suitable fasteners. Provided 3 inch adjustable legs for bottom unit carcase. WPC shelves fixed with support buttons/brackets/cleats as required complete all as specified and as directed. Note :- (i) Accessories such as soft close hinges. drawer channels, handles shall be measured and paid seperately as supply only but labour for fixing the same and other minor items not otherwise described shall be deemed to be including in the unit rate quoted. (ii) The actual net area of WPC board(All sides of cabinet) as fixed at site shall be measured for payment. (iii) The 3D design/drawing of modular kitchen/cabinets etc shall be provided by the GE before execution of the work. (iv) Dismantling old boarding shall deemed to be included in quoted rates.

100

-

-

... More
S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete all as specified and directed.

192

-

-

... More
Supply only soft closing/self closing concealed hinges(cabinet hinge) full overlay. Opening angle 105 degree made of stainless steel (SS-304 Grade), nickel plated finish complete all as specified and as directed. Make :- Hafele/Bosney/Hettich

56

-

-

... More
Supply only Stainless Steel handle 100 mm size complete all as specified and directed.

56

-

-

... More
Supply only soft closing/self closing tandem slim series 6 inch, depth 500mmm drawer system. Make:- Hafele/Bosney/Hettich

24

-

-

... More
S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

32

-

-

... More
S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.

88

-

-

... More
S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.

128

-

-

... More
S&F Aluminium die cast body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

12

-

-

... More
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed fixed complete all as specified.

36

-

-

... More
S&F 140 mm floor door stopper of Stainless Steel body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

36

-

-

... More
Supply and fixing factory made uPVC white colour glazed and wire mesh ventilator made of frame 47 mm X 50 mm mullion 47 mm X 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 mm X 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, including toughenedGlass- 6 mm thick tinted or figured glass pin head type complete all as specified and as directed. Note :- (i) The cost of glass, wire mesh, fasteners and all other connected accessories shall deemed to be included in the quoted unit rate. (ii) Net Opening will be measured for payment purpose. (iii) Cost for making good to cutting holes/dismantled portion during taking down old, with PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (iv) uPVC frame, sash and mullion extruded profiles ± 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

10

-

-

... More
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50 m height made of (big series) frame 90 mm X 42 mm & sash 31 mm X 57 mm both having wall thickness of 2.3 +- 0.2 mm and single/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 +-0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC nylon rollers (weight bearing capacity to be 40 kg), G.I. fasteners 100 mm X 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality (as per approved sample), including 5 mm thick toughened glass and Wire Cloth Stainless steel 304 Grade, natural finish, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed. Note :-1. The cost of glass, wire mesh, fasteners and all other connected accessories shall deemed to be included in the quoted unit rate. 2. Net Opening will be measured for payment purpose. 3. Cost for making good to cutting holes/dismantled portion during taking down old, with PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. 4. uPVC frame, sash and mullion extruded profiles +- 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

40

-

-

... More
S&F Eye door viewer (magic eye) of size 25mm dia fixed in position for door shutters.

12

-

-

... More
S&F of Door Seal (brush type) of length exc 800mm and nexc 1000mm, width not less than 38mm Including Brush fixed with screws complete as directed.

12

-

-

... More
S&F Framed work such as grills, gratings coolar stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

600

-

-

... More
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint (for steel surfaces) including preparation of surface complete all as specified.

50

-

-

... More
S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set with and incl ready mix tile adhesive laid and pointed in coloured cement to match the coloured tiles over and including 25mm thick bedding layer of PCC 1:2:4 for laying finishes, complete all as specified as directed by Engr-in- Charge.

48

-

-

... More
S&F double charge Vitrified tiles 9-10mm thick (square/rectangular) (light shade) area of each tile exc 0.18 sqm and not exceeding 0.38 sqm, as in floors set with and incl ready mix tile adhesive keeping 4 to 5mm wide joints to be filled with apoxy grout of approved colour over and including 25mm thick bedding layer of PCC 1:2:4 for laying finishes,complete all as specified as directed by Engr-in- Charge. Note : (i) cost of epoxy grout shall deemed to be included in quoted rates. (ii) Cost of epoxy grout and tile adhesive shall deemed to be included in quoted rates.

270

-

-

... More
All as per Item No 29 but in skirting.

30

-

-

... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified.

748

-

-

... More
S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm or 600x300x7mm thick set with and incl ready mix tile adhesive and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work.

400

-

-

... More
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar

4.5

-

-

... More
M&L Green/black marble work 15 to 17 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified

30

-

-

... More
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

65

-

-

... More
M&L, rubbing, grinding and polishing of existing kota stone in flooring and in skirting/risers complete.

35

-

-

... More
M&L, Machine cut kota stone slab flooring, cills 20-25mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.(single piece of Kota stone to be fixed in stair treads).

10

-

-

... More
M&L, Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (single piece of Kota stone to be fixed in stair risers).

5

-

-

... More
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided.

11.375

-

-

... More
Water proofing treatment to sunken slab and adjjoining vertical surfaces as specified under :- (a) Cleaning of complete sunen portion and roughining to receive treatment. (b) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces Note : WPC shall be measured and paid separately) (c) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (d) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (e) Applying second coat of chemical Pidifin 2K (Dr Fixit) / eqivalent @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers. Note : The plan area of floor shall be considered for payment.

16

-

-

... More
M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc.

6.4

-

-

... More
PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection including making grooves.

45

-

-

... More
Demolition of RCC of any descrition such chajja, shelves etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition).

1

-

-

... More
M&L for reinforced cement concrete type B1 1:1.5:3 (20 mm graged aggregate) as in Slab ,footing, beams, column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified.

1

-

-

... More
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

50

-

-

... More
Use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings, column, beams and similar work not exceeding 200mm thick.

5

-

-

... More
Taking up or down GI tubing 15mm bore pipe.

120

-

-

... More
Taking up or down GI tubing 20mm bore pipe.

225

-

-

... More
Taking up or down GI tubing 25 mm bore pipe.

20

-

-

... More
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and all other Brass fittings required except given in item number 52 to 55 on walls /ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified nominal size 20mm complete all as specified and directed by Engr-in-Charge. Note :- Pipes to be fixed on wall with and incl made of galvanised carbon steel and having noise absorbing silicon rubber sleeve. Clamps to be fixed to wall with anchor fastner with nut and washer and full threaded bar of size M 10. Distace of two clamps should not be more than 1.00m complete all as specified and directed.

100

-

-

... More
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and incl all other Brass fittings required on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified nominal size 25 mm complete all as specified and directed by Engr-in-Charge. Note :- Pipes to be fixed on wall with and incl clamps made of galvanised carbon steel and having noise absorbing silicon rubber sleeve. Clamps to be fixed to wall with anchor fastner with nut and washer and full threaded bar of size M 10. Distace of two clamps should not be more than 1.00m complete all as specified and directed.

150

-

-

... More
S&F of 20 mm nominal size CPVC Brass Male/ Female Brass Threaded Adaptor fittings complete all as specified.

25

-

-

... More
S&F of 20 mm nominal size CPVC Brass Elbow fittings complete all as specified

50

-

-

... More
S&F of 20 mm nominal size CPVC Brass T fittings complete all as specified

40

-

-

... More
S&F of 20 mm nominal size CPVC Brass Union fittings complete all as specified

10

-

-

... More
S&F in repair Rotational moulded polythylene 500 capacity water storage tank (Cylindrical vertical with closed top) white coloured and NSF certified, hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. & dismantling of old water tank complete all as specified

8

-

-

... More
S&F in repairs 25mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

6

-

-

... More
S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

32

-

-

... More
S&F in repair Brass CP Basin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.

8

-

-

... More
S&F in repair Brass CP Wall mixer with L bend for shower connention, 15mm bore for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

8

-

-

... More
S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

48

-

-

... More
S & F in repair 15 mm bore chromium plated stop valve of cast copper alloy with long shank and cup (concealed type) ends for iron pipe or for unions and fixed all as specified and directed.

8

-

-

... More
S & F PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified.

48

-

-

... More
S&F in repair stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified.

8

-

-

... More
S&F in repair sinks Without Drainage Board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and CP waste fittings; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

8

-

-

... More
S&F in repair vitreous china wash hand basin with pedastal, white, flat back of size 550mm x 400mm including cantiliver CI/angle iron brackets, CP brass waste coupling 32mm bore with rubber washer and PVC waste pipe 32mm bore complete all as specified and directed .

8

-

-

... More
Supply and fixing vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including reduction drain (for outgoing pipe) and flushing pipe, anti-siphonage pipe, etc. and making holes in wall cover as recommended by manufacturer for particular model, closed pattern with flat bottom etc. and including S & F all necessary accessories set like rag bolts/gel gasket/hinges, SS jet spray with 01 metre long PVC pipe with CP connector etc. as recommended by manufacturer for fixing, packing and taking down existing WC of any description/size complete in all respect as specified.

8

-

-

... More
Supply and fixing concealed flushing cistern of PVC 8 litre capacity with dual flushing system, valve less syphonic action type, with inlet/outlet, ball valve, float, all internal components connection to pipe etc. and including S & F of all necessary accessories/installation kit and ‘S’ type drain pipe connection set for wall hung WC.

8

-

-

... More
S&F brass CP health faucet for EWC, CP brass with minimum 1000mm long CP flexible pipe and hanger complete.

8

-

-

... More
S&F in repair brass chromium plated shower rose 125 mm of size with SS shower arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.

8

-

-

... More
S&F 600mm x 450mm x 6mm mirror of selected quality glass with wooden/PVC frame and fixed to wall complete all as specified.

8

-

-

... More
S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.

8

-

-

... More
Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

8

-

-

... More
S&F PTMT soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

8

-

-

... More
S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

8

-

-

... More
M&L for 25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.

80

-

-

... More
Dismantling and disconnecting existing CI / PVC soil waste/vent pipe 100/75 mm bore fixed to wall,laid in trenches incl all fittings & accessories

100

-

-

... More
S & F PVC -U , type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 100/110 mm dia, fixed to Wall / floor complete all as specified and as directed. Note :- Pipe and fitting laid under floor shall be fixed and covered with PCC 1:2:4 type B1 complete.

50

-

-

... More
S & F PVC -U , type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 75 mm dia, fixed to Wall/ floor complete all as specified and as directed. Note :- Pipe and fitting laid under floor shall be fixed and covered with PCC 1:2:4 type B1 complete.

50

-

-

... More
S & F UPVC bend with/without inspection door (any angle),110 mm dia confirming to IS 14735: 1999 Complete all as specified and directed.

12

-

-

... More
S & F UPVC bend with/without inspection door (any angle), 75 mm dia confirming to IS 14735: 1999 Complete all as specified and directed.

12

-

-

... More
Supply and fix PVC SWR Nahani / Floor trap plain with SS grating fixed in cement concrete type B1 (1:2:4) including jointing with solvent cement , dia of outlet 75 mm , water seal minimum 50 mm complete all as specified and as directed.

32

-

-

... More
S&F UPVC Tee single , 75 mm dia with inspection door conforming to is 14735:1999 complete all as specified and directed.

6

-

-

... More
S&F UPVC Tee single , 110 mm dia with inspection door conforming to is 14735:1999 complete all as specified and directed.

6

-

-

... More
S&F UPVC vent cowl 75 mm dia conforming to is 14735:1999 complete all as specified and directed.

6

-

-

... More
S&F UPVC vent cowl 110 mm dia conforming to is 14735:1999 complete all as specified and directed.

6

-

-

... More
S&F Salt-glazed stoneware square mouth gully traps P type 150x 150 mm , including setting and jointing to drain with cement mortar 1:1 complete all as specified and Directed.

6

-

-

... More
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc

960

-

-

... More
M&L for rendering 10-12 mm thick with ready mix plaster mortar on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth.

500

-

-

... More
M&L for rendering 15 mm thick with ready mix plaster mortar on fare face of brick work or concrete surfaces and finishing the surface even & smooth.

400

-

-

... More
M&L for rendering 5 mm thick with ready mix plaster mortar on fare face of brick work or concrete surfaces and finishing the surface even & smooth.

60

-

-

... More
Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified.

1000

-

-

... More
M&L for applying wall care putty on internal and external surfaces of walls/ceilings (thickness vary from 1.0 to 2.0mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Notes :- (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

1900

-

-

... More
M&L for applying 02 coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete,as per manufacturer specification complete all as specified and directed.

1400

-

-

... More
M&L for finishing walls with Acrylic Smooth exterior paint of required shade over prepared surface (Two coat applied @ 1.67 ltr/10 sqm/coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) by using following brands of emulsion and primer complete all as specified and directed.

500

-

-

... More
M&L for preparing existing treated surfaces of ceilings including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

175

-

-

... More
M&L for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified.

60

-

-

... More
Shotcreting average thickness 40mm in RCC columns, beams and slab etc. (with mix minimum cement content of 350 Kg per Cum). Concrete having the specified minimum characteristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregates of 6mm maximum size in proportion as per design criteria) incl the cost of centering and shuttering at edges and corner etc as directed by Engr-in-Charge incl chipping of unsound/week concrete material 40mm average thickness from slabs, beams/columns etc with mannual chiesels or standard power driven percussion type or of approved make incl tapering of all edges, make square shoulder of cavities incl cleaning the exposed concrete surface and reinforcement with wire brushes and throughly washing with water and allowing it to dry etc incl removel of rust by applying approved rust remover chemical and the coating with Dr Fixit Epoxy zinc primer @ 6 Sqm per Litre at DFT of 100 micron as per specification, applying the SBR Latex based bonding agent on each layer of the shootcreting work of Dr Fixit Pidicrete URP on the entire surface complete all as directed including supply and fixing welded wire net having minimum weight of 2.2 kg/Sqm on complete area to be shotcreting and 10mm thick plaster with readymatde plaster mortar finished even and smooth and applying two coat of white wash including removing rubbish material from building and thrown in low lying area at any distance within station complete as specified and as directed by Engineer-in-Charge.

100

-

-

... More
M&L for preparing old steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

50

-

-

... More
M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer-in-Charge.

1

-

-

... More
Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge.

3

-

-

... More
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.

2.5

-

-

... More
M&L 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base, floors etc complete as specified and directed.

20

-

-

... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.

15

-

-

... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

12

-

-

... More
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

3

-

-

... More
Demolition and breaking up drain pipes 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.

20

-

-

... More
Supply and laying DWCPE (SN8) 200 mm inner dia diameter drain pipes as per IS-16098 (Part-II), laid in trenches on moorum bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge

20

-

-

... More
M&L 200mm bore Concrete bed (PCC 1:3:6 type C2) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested.

20

-

-

... More
S&F in repair SFRC (Steel fibre Reinforcement concrete cover & frame ) HD-20mm, conforming to IS-12592, graded rectangular clear opening 560X560mm and fixed over manhole and make good of manhole complete all as specified and directed.

6

-

-

... More
S & F in Repair Precast Cement Concrete ( type B0 1:2:4 using 12.5mm graded stone aggregate) as in louvres and jallies , 25mm thick set in CM 1:4 All as specified and directed by Engr in Charge.

8

-

-

... More
Supply only SWR Liquid water proofing compound @ 2% of weight of cement used.

15

-

-

... More
OVERLAY- PU BASED ELASTOMERIC LIQUIED MEMBRANE SYSTEM FOR EXPOSED ROOF : Providing and applying polyurethane liquid roof waterproofing with improved water ponding capability, elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and solar reflective index not less than 106 as per (ASTM E1980-19)/tear strength ~20 N/mm (Free film, 14 days, +30 degree C) (ASTM D624) and tensile strength >= 2 N/mm2 (ASTM D4541), elongation 350 to 400% as per ASTM D412 and crack bridging ability upto 2mm. (a) After proper surface preparation, Apply one coat of Primer for PU coating as per manufacturers specification. (b) Apply 1st coat of ShaliUrethane® BTD (white) @ 650 gm / m²(minimum) or equivalent by brush / roller while prime surface is tacky, Spread waterproofing reinforced Glass Fiber mash of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky. Allow 1st coat to dry. (c ) Apply 2nd & 3rd coat of ShaliUrethane® BTD (white) @ 650 gm / m² (minimum) or equivalent by brush/roller. Make : Fosroc/Sika/Choksey/Bostik/STP/ Asian Paints/Berger Paints Note : (i) The Minimum dry film thickness (DFT) of roof treatment shall be 1.5mm if any shortfall in thickness of above treatment the same shall be achieved by additional coat. (ii) The procurement of material and execution of the work of water proofing treatment shall be carried out by authorised applicator approved by GE. (iii) The manufacturer/authorised applicator shall give a warranty for the performance & durability for 10 years.

13

-

-

... More
S & F plain profile bracket (A3) to maintain gap of 100 mm from wall as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.

80

-

-

... More
S & F ribbed low carbon steel slotted ‘C’ channel (B2) as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.

12

-

-

... More
S & F ribbed low carbon steel continuous slotted ‘C’ channel (B3) as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.

12

-

-

... More
S & F U bolt type C2 suitable for PVC pipe of nominal outside diameter 110 mm as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.

30

-

-

... More
S & F U bolt type C4 suitable for PVC pipe of nominal outside diameter 75 mm as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.

30

-

-

... More
Taking down copper/aluminium point wiring (light, celling fan,exhuast fan), socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

210

-

-

... More
Taking down any size of DB's(distribution box ).alongwith MCCB/MCB removing materials for taking credit (credit for above items should be made as per conditions separately).

10

-

-

... More
Taking down submain wiring any size and Rigid non-metallic PVC conduit any size for taking credit (credit for above items should be made as per conditions separately).

120

-

-

... More
Taking down conventional electric water heater (Geyser for deposit to mes store yard.

8

-

-

... More
Taking down conventional celling fan for deposit to mes store yard.

24

-

-

... More
Taking down conventional exhaust fan for deposit to mes store yard.

8

-

-

... More
Point wiring complete with ISI marked 2.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLSH with multistranded copper conductor drawn through & including PVC rigid concealed conduit suitable size with all accessories bend reducers,MS hooks,MS junction boxes,terminal boxes & including modular steel terminal boxes factory made and white cover modular plate with frame suitable for (modular switches, sockets, fan regulator) & including 2.5 sqmm copper conductor as earth continuity to connect common earth dolly complete for One light point/Fan Point/Exhaust point controlled by One way switch.

128

-

-

... More
All as per Item No 125 but One light point controlled by one two way switch

2

-

-

... More
All as per Item No 125 but One three pin socket out let 5 amps on the same board with other switches

32

-

-

... More
All as per Item No 125 but One 3 pin, 5A switch socket outlet point on independent board

32

-

-

... More
All as per Item No 125 but One bell point controlled by one bell push

8

-

-

... More
All as per item no. 125 here-in-before but with 4 sqmm cable for 1No 16 amps socket outlet point on independent board including 4 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor.

16

-

-

... More
M&L submain wiring with two single core PVC FRLSH insulated copper conductor 6 sqmm and same 6 sqmm for continuous earth wire drawn in to concealed PVC conduit & including PVC rigid concealed conduit suitable size complete all as specified and directed. Note : Cost of earth wire including in sub main wiring.

120

-

-

... More
Supply and fixing of LED tube light fiting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engr-in-Charge.

58

-

-

... More
Supply and fixing of LED tube light fiting 10W, (2 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size all as per specification and directed by Engr-in-Charge.

32

-

-

... More
Supply and fixing complete set of 1x10 watt LED retrofit type bulkhead fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket lamp holder etc complete with all accessories.

4

-

-

... More
Supply and fixing in replacement energy efficient LED Security light fitting of 30W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection all as specified and directed by Engr-in-Charge.

2

-

-

... More
Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

2

-

-

... More
Supply & fixing ceiling fans BLDC type regulator operated complete with blades, down rods and accessories, 230 V, 1200 mm sweep,service value not less than 6.0 with brushless direct current motor (BLDC) complete all as directed

24

-

-

... More
Supply and fixing fan step regulator, 120W - 1 module complete all as specified and directed.

24

-

-

... More
M&L ceiling rose 3 terminal / PVC / polycarbonate isolated body all as per specification and directed by Engr-in-Charge.

128

-

-

... More
Supply and fixing Modular switch 1 way 6 amps one module switch all as specified and directed.

184

-

-

... More
Supply and fixing Modular socket 6A 2/3 pin combined 2 module socket all as specified and directed.

56

-

-

... More
Supply and fixing Modular switch 1 way 16 amps 1 module switch all as specified and directed.

16

-

-

... More
Supply and fixing Modular socket 6A / 16A - 2/3 pin combined 2 module all as specified and directed.

16

-

-

... More
Supply and fixing Modular switch 2 way 6 amps one module all as specified and directed.

4

-

-

... More
Supply and fixing Modular switch bell push 6 amps one module all as specified and directed.

8

-

-

... More
S&F Bell ding dong AC 230V single pole complete all as specified and directed .

8

-

-

... More
Supply and fixing Vertical loadline TPN DB (made out of CRCA sheet ,fitted with DIN channel neutral link and 160 Amp rated bus bar), 4 Way, suitable for mounting MCCB as incoming & MCB as outgoing, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type, The DBs shall be of IP-42 protection class, including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engr-in-Charge.

2

-

-

... More
S&F sheet metal enclosure for DB's SPN 230 volts 8 way double door complete all as specified and directed.

8

-

-

... More
S&F in MCCB 4 pole, 415 V. adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified and directed.

2

-

-

... More
Supply and fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

8

-

-

... More
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

58

-

-

... More
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15mm dia upto earthing test point / equipment fixed with 2 Nos. of mold steel clamps made out of 25mm x 3mm flat iron and preforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 complete all as specified and directed by Engr-in-Charge. Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber. (ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is included in this item. (iii) Water pipe shall be provided in slainting position.

4

-

-

... More
M&L submain wiring with two single core PVC FRLSH insulated stranded copper conductor cable of size 4 sqmm and same 4 sqmm for continuous earth wire drawn in to concealed PVC conduit & including PVC rigid concealed conduit suitable size complete all as specified and directed .(For AC & Geyser).

160

-

-

... More
Supply and fix electric water heater(geyser), storage type steel body with stainless steel inner tank with glass lining and heating element capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete with all accessories.

8

-

-

... More
S & F DBOXx SRCD (Socket Residual Current Device) is ready Plug & play all in one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults Single pole complete with one SPN MCB 20 Amps, 240V, AC Supply and plug top all types all as specified and as directed by Engineer-in-charge (For AC & Geyser).

16

-

-

... More
Supply and fixing exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge.

8

-

-

... More
Taking down & then Re-Fixing only electronic/electric meter single phase complete with accessories any size. two core copper flexible wire not less than 0.5 mtr for connecting from incoming to outgoing any size complete all as specified and directed.

8

-

-

... More
Taking up cable of the any sizes removing materials for taking credit (credit for above items should be made as per conditions separately).

115

-

-

... More
Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs complete all as specified and directed.

115

-

-

... More
Supply and laying double wall corrugated pipe (DWCP) size of 77mm/63mm ,SN 4, Non-metallic,resistance to compression typo 450, resistance to impact, normal, resistance to bending pliable resistance to external influence; ingress protection: IP 67, resistance against corrosion: without protection, resistance to flame propagation, non flame propagating conforming to IS-16205 (part-24) 2017 including necessary jointing material le snap fit coupler with rubber ring, sealing plug, tees, bend, angel bend etc for passing electrical cable complete all as specified and directed by Engr-in-Charge.

75

-

-

... More
Supply and laying steel water Tubeing, 50 mm dia ISI Marked, '“light grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified and directed.

17

-

-

... More
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying cables/poles foundation / stay assembly and getting out in soft/loosse soil all as specified and directed.

17.212500000000002

-

-

... More
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm all as specified and directed

15.1351987275

-

-

... More
Removing the excavated soil from the trench n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

1.6816887475000002

-

-

... More
Cutting existing CI/DI pipe 80MM bore branch GI pipe line 40 mm bore and inserting tee including all accessories complete all as specified and directed.

2

-

-

... More
Supply and laying steel water Tubeing, 40 mm dia ISI Marked, 'medium grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting.

10

-

-

... More
S&F GI Pipe 25mm bore Medium grade and including GI Fitting in Trenches/on Wall or Laying in floors complete all as specified and directed .

56

-

-

... More
S&F in repair Gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed 25 mm bore of pipe complete all as specified and directed.

8

-

-

... More
M&L for drilling/boring of holes (horizontal) under main road pavement hard standing or any other situation manual or trenches technology mean for accommodate 50mm bore GI tube (light grade) in the drilling holes, including returning filling in the end working space & also including removal of surplus soil and making good the surface complete all as specified and as directed.

7

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.