Military Engineer Services Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 80,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_621731_1Bid Award Id
ViewTender No
GE(S)/M-45/2023-24Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
80
-
-
... More
Supplying and laying of 25mm dia CPVC pipes (Hot & Cold) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
70
-
-
... More
Supply and fixing exhaust fans AC single phase 230/240V of size 300mm sweep made steel body with louvre including connecting to ceiling rose all as required complete all as specified and directed.
12
-
-
... More
M&L for plain cement concrete 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
6
-
-
... More
Supply and fixing exhaust fans AC single phase 230/240V of size 150mm sweep 5 blades off white colour model DX made of polycarbonate body with louvre of make approved by GE including connecting to ceiling rose all as required complete all as specified and directed.
12
-
-
... More
S&F in repair 75mm bore CI floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
8
-
-
... More
M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed.
160
-
-
... More
M&L for RCC 1:2:4 type B-1 (nominal mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
7
-
-
... More
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.
70
-
-
... More
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 150mm bore complete all as specified and directed.
15
-
-
... More
M&L for preparation of old plaster surfaces of walls//facia of any description , and applying two coat of exterior weather coat paint, white or tinted, complete all as specified and directed.
20
-
-
... More
S&F Mild steel Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.confirming to grade Fe-290 (Grade E-165) complete all as specified and directed.
281
-
-
... More
M&L for PCC block type B-1, 1:2:4 (20mm grade stone aggregate ) for holding of GI pipe suitable for fixing of GI pipes with aluminium rod of size 45x45x45cm, complete all as specified and directed.
1.09
-
-
... More
M&L for dry clean fine river sand as in sand cushioning to underground cable 8cm below and 15cm above the cable including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.
1.62
-
-
... More
S&F in replacement of GI tubing light grade 40 mm bore cut to size and fixed along the pole for cable protection including clamp 02 Nos of size 25x4 mm, nut bolts , washers etc all as required at site including taking out old one complete all as specified and directed.
10
-
-
... More
S&F for Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame complete all as specified and directed
9
-
-
... More
M&L for point wiring for one light point / fan point / bell point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.
100
-
-
... More
Excavating over areas, exc 3.0m but n exc 4.5 m deep and getting out in any type of soil complete all as specified.
75
-
-
... More
S&F corrugated waste pipe, 32mm dia, suitable for WHBs/Sinks, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.
20
-
-
... More
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, complete all as specified and directed.
20
-
-
... More
M&L for cement concrete bed (1:4:8 type D-2) to 150mm dia drain pipes including packing under, and haunching
against the sides of pipes after they are laid and tested; complete all as specified.
115
-
-
... More
M&L for Mild steel round bars as in handles and runners, clamps and similar small articles complete all as specified and directed.
100
-
-
... More
S&F Rotational moulded polyethlene water storage tank of capacity 1000 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.
5
-
-
... More
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, complete all as specified and directed.
5.75
-
-
... More
M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, incl taking down existing pipes complete all as specified and directed.
70
-
-
... More
M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
6.4
-
-
... More
S&F "as in repair" CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.
9
-
-
... More
S&F "as in repair" MS chromium plated toilet paper holder, complete all as specified and directed.
9
-
-
... More
M&L for preparation of newly plaster surfaces of walls//facia of any description , and applying two coat of exterior weather coat paint, white or tinted, complete all as specified and directed.
360
-
-
... More
S&F "as in repair" Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.
9
-
-
... More
M&L for lagging to pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool performed SNAP ON pipe section of density 144 kg/cum aluminium foil complete all as specified and directed.
73
-
-
... More
Supplying and fixing for test point terminal made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 Nos. 8mm dia 25mm long hexagonal head screw complete all as specified and directed.
6
-
-
... More
S&F in repair for buzzer, ding dong AC 230 volts, single pole, complete all as specified and directed.
9
-
-
... More
M&L for 150mm Reinforced concrete pipes, class NP2,laid
and jointed in trenches in CM 1:3 complete with collars complete all as specified.
83
-
-
... More
Taking down cement plaster on brick walls or stone walls or concrete surface any description etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
1385
-
-
... More
M&L in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe fixed complete all as specified and directed.
2
-
-
... More
M & L for 40 mm thick P. C.C type B-0, 1:2:4 (using 12.5mm graded aggregate) as in sub floors for laying floor finish complete all as specified and directed.
250
-
-
... More
M&L for non skid ceramic coloured tiles 10mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, complete all as specified and directed.
212
-
-
... More
S&F 100mm dia stainless steel grating doom without waste hole fixing in floors, complete all as specified and directed.
18
-
-
... More
Excavating over areas, exc 1.5m but n exc 3.0 m deep and getting out in any type of soil complete all as specified.
38
-
-
... More
Supplying and fixing for aluminium strip 25x3 mm complete with PVC shaddle and fixing screws for roof conductor/down conductor above ground upto test points complete all as specified and directed.
224
-
-
... More
M&L in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe fixed complete all as specified and directed.
2
-
-
... More
S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.
4
-
-
... More
S&F "in replacement" VTPN distribution board with provision for MCCB as incommer 63A four pole 4 way IP 54 (for incoming MCCB & outgoing MCBs), with copper bus bar for each phase, with Neutral bar, Earth bar and cable ties for cable management, fully insulated bus bar & shrouded Neutral bars, with 63 Amps MCCB, 16 KA, 4 pole, as incomer and 06 Nos SP cap 6-32 Amps MCBs as outgoing complete all as specified and directed. Note:- Rate of MCCBs and MCB, including cutting, chasing, grouting in wall are included in above rate.
1
-
-
... More
M&L 50 mm dia sand cast CI Bends with ovel access door and jointed with neat cement paste complete all as specified and directed.
2
-
-
... More
M&L for Machine cut pre polished kota stone slab flooring not less than 18-20 mm thick laid over & including 20 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
6
-
-
... More
S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.
30
-
-
... More
M&L 100 mm dia sand cast CI cowls complete all as specified and directed.
3
-
-
... More
M&L for 5mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc., complete all as specified and directed.
260
-
-
... More
M&L for fly ash bricks, old size bricks, straight or curved on plan to any radius in one brick thick honey comb walling built in CM (1:6) complete all as specified and directed.
130
-
-
... More
S&F "as in repair" 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.
20
-
-
... More
S&F "as in repair" Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed.
9
-
-
... More
S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.
17
-
-
... More
S&F "as in repair" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.
10
-
-
... More
Supplying and fixing 1100 volts grade 6 Sqmm twin core heavy duty cable PVC insulated aluminium conductor, multi strand, served with inner sheathing of PVC tape and
overall PVC sheathed in service connections suspen-ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat
or circular from electric pole to MCB DB complete all as specified and directed.
100
-
-
... More
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
24
-
-
... More
M&L 75 mm dia sand cast CI Bends with ovel access door and jointed with neat cement paste complete all as specified and directed.
3
-
-
... More
S&F lamp holder insulated body with back plate for batten fittings with polycarbonate body, complete all as specified and directed.
25
-
-
... More
S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
9
-
-
... More
S&F 3mm thick figured sheet glass,pinhead type ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.
3
-
-
... More
M&L 75 mm dia sand cast CI cowls complete all as specified and directed.
3
-
-
... More
M&L for preparation of old surfaces of wood & wooden of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
11
-
-
... More
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.
24
-
-
... More
M&L for fly ash bricks, old size bricks, straight or curved on plan to any radius in half radius built in CM (1:4) complete all as specified and directed.
9
-
-
... More
M&L for Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.
5
-
-
... More
M&L for concrete bed 1:4:8 type D-2 to 150mm dia drain pipes including packing under, and haunching
against the sides of pipes after they are laid and tested; in complete all as specified and directed.
10
-
-
... More
S&F of ceiling rose, surface bakelite, 2 to 3 terminals, 230 Volts AC with polycarbonate body, complete all as specified and directed.
78
-
-
... More
S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.
9
-
-
... More
Dismantling and taking out burnt winding by cutting, cleaning slouts and re-winding of AC ceiling fan motor1200mm/1400mm of any make of fan with super enameled heat resistant copper winding wire of existing gauge & nos of turns including, sleeve work, varnishing with E class insulation, greasing, threading, connection with flexible wire 0.472 mm copper wire upto connector block including lath work replacement of nuts/bolts, PVC canopy as required and re-assembling and testing for 4 Hrs after repair complete all as specified and directed. (Repairs will be measured and paid for separately under respective items):-
Notes:- (i) Fan shall be collected by the contractor from MES store yard at thier own arrangement. (ii) Motor shall be wound with machine only and repair of fan inside complex/office of GE(S) Mamun. (iii) Khaitan/RPG/KEI or equivallent make super enameled copper winding wire shall only be used. (iv) Rates are deems to be included cost of repair /servicing & replacement of minor spare part i.e. blade screws, capacitors clumps terminal connection , split pin spring washer etc.
8
-
-
... More
Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.
2
-
-
... More
S&F in replacement of LED light fittings mirror type with high output diffuser 2 feet 10 watt 220 volt AC decorative type with driven holder and LED lamp including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.
9
-
-
... More
M&L in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 50 mm dia CI pipe fixed complete all as specified and directed.
2
-
-
... More
S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
25
-
-
... More
Cleaning of dust removal of all loose existing bituminous materials manually and with heat torch gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repair all joints and cracks with highly elastic bituminous cold applied putty of tarplastic having penetration after setting upto 8mm ., Create SSD condition on dsurface with water . Prime the surface with tarfelt LM or equivalent make approved by GE mixed with portable water in the ration 1:1 and apply solution @ 400gm per sqm (As per surface conditions). Apply first coat of tarfelt LM or equivalent make of approved by GE having elongation 200% confirming o ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7days 0.50 MPA confirming to ASTM-C- 412 with no dilution of water on primed surface while the surface is still tacky with consumption of 700gm per sqm.
Lay fibremesh of 45 GSM/fibre mesh simultaneously on surface and paste it properly with overlap of 50mm. Allow the first to dry for 10 to 12 Hrs. Apply 2nd coat on cured first coat with consumption @ 700gm per sqm in opposite direction of first coat by brush or roller. Allow it to dry for 10-12 hrs after apply 3rd coat with consumption @ 700gm per sqm if required wherever fibremesh is not getting completely embeded to surface. Ensure final curing time of 36 hrs before alloeing/carrying out any further work. Conduct ponding test after min 7 day. Applying UV resistant Elastomeric ExteriorAxcrylic Weather resistant water proof coating of Shalicryl-215 or equivalent make approved by GE having elongation of 300% after curing of 14 days confirming to ASTM D-6083- for UV protection of bituminous elastomeric acrylic emulsified liquid membrane of Tarfelt LM or equivalent make of approved by GE to give long life and prevents its deterioration from sunlight. Note :- Application of water proofing treatment will be done by authorised applicator from company side & approved by GE.
250
-
-
... More
S&F "as in repair" Vitreous china wash hand basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.
9
-
-
... More
Supplying and fixing for GI pipe medium grade of sizr 40mm dia duly two holes drilled for holding of air terminal AI rod with all fittings complete all as specified and directed.
18
-
-
... More
S&F in repair 100mm bore CI floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
8
-
-
... More
Taking down chowkhats or frames n exc 1.5 Sqm each (without taking off shutters from the frame), complete all as specified and directed.
16
-
-
... More
M&L for 15mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.
52
-
-
... More
Supplying and laying of 20mm dia CPVC pipes (Hot & Cold) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
140
-
-
... More
S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
9
-
-
... More
Supplying and Fixing PP-R Ball valves (brass insert) of size for 20mm dia CPVC pipes as per requirement of the site complete all as specified.
8
-
-
... More
S&F and testing factory made sheet enclosure for MCB DB SPN 2 way without bus bar 240 volts with single door, IP-43 protection duly fixed / concealed in wall complete and making good disturbed surfaces of wall floor etc including necessary connecting lugging with copper lugs pin / ring type complete all as specified & directed.
4
-
-
... More
S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 50 x 100mm comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length (MS hold fasts/lugs or SS fasteners shall be paid separately) complete all as specified and directed Note :- i) WPC solid door / window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable but no extra payment on this account shall be made.ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.
52
-
-
... More
S&F 20mm dia Gun-metal, globe or gate valves,
with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
5
-
-
... More
Taking down ceiling/exhaust fan by disconnecting from ceiling rose, dismantling blades & hanging ceiling fan back after repair and application of one coat of synthetic enamel paint by spray painting and rewritting number including fixing of blades and including electric connections complete all as specified and directed.
15
-
-
... More
M&L for earthing complete with galvanised GI earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means bolt, nuts, check nuts and washer made of galvanised iron or steel including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel and wire mesh and 15mm bore GI protection pipe 'light grade' from earth pit to main board including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as specified and directed.
2
-
-
... More
M&L for earthing complete with copper earth plate electrode of size 600x600x3.15mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to and including earth lead of copper strip 20x3mm by means bolt, nuts, check nuts and washer made of copper/bronze including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel and wire mesh and 15mm bore GI protection pipe 'light grade' from earth pit to main board including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as specified and directed.
6
-
-
... More
M&L for preparation of old surfaces of walls/ceiling/kerb stone/facia of any description , and applying two coat of exterior weather coat paint, white or tinted, complete all as specified and directed.
15
-
-
... More
Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty electric cable , with aluminium conductor of size 25 Sqmm x 3.5 core complete all as specified and directed. Note:- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.
72
-
-
... More
M&L for cutting holes in bricks/ stone masonary wall anf prvn of PCC 1:3:6 for making proper size of hole to matchibg with size exhaust fan for proper vantilation including MS bolts 04 Nos for fixing exhaust fan complete all as specified and directed. Note :-(i) Rates are deems to be included to making the cutting holes smmothly and colour wash as per existing colour. (ii) Rates are deems to be including charges of hiring T&P, i.e. ledder square folding and insurance of labour deployed, being holes are made to be at multistorage bldgs of different height.
12
-
-
... More
S&F 150mm bore PVC (SWR) pipes,type B single socketed, in any length with rubber ring joints, laid in trenches or floors as waste pipes jointed with solvent cement including demolition of existing pipe, complete all as specified and directed.
10
-
-
... More
M&L 75mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps.complete all as specified and directed.
10
-
-
... More
S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
18
-
-
... More
S&F 100mm bore CI gully/nahani trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
8
-
-
... More
Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade with and including wall care putty 2mm thick over plastered surface of wall, complete all as specified.
765
-
-
... More
M&L for 100mm Reinforced concrete pipes, class NP2,laid
and jointed in trenches in CM 1:3 complete with collars complete all as specified.
70
-
-
... More
M&L for preparation of new surfaces of wood & wooden of any description exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
11
-
-
... More
Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade over one coat of chalk white primer on ceiling surface, complete all as specified.
260
-
-
... More
S&F 150mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.
30
-
-
... More
M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection and paving laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.
85
-
-
... More
S&F "in replacement" MCB SPN, 240 Volts, 40 Amps with repturing capacity 10 KA 'B' series complete all as specified and directed.
2
-
-
... More
M&L for point wiring with PVC insulated fire retardant low smoke multistraded copper conductor cable of 1.5sqmm in including PVC concealed non metallic conduit (ISI marked) medium grade not less than 20mm dia with all accessories and including pressed steel sunken terminal boxes (for mounting switches / regulators / socket / bell push etc) made of not less than 16 gauge ms sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke stranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting complete all as specified and directed. (Phase neutral and earth wire shall be provided in standard colour code R, Y,B for phase , black for neutral and green for earth wire). Note :- In ceiling portion surface conduit wiring shall be carried out. One light point or one fan point or bell point controlled by one switch SP one way 230Volts.
12
-
-
... More
S&F in repair modular fan step regulator, step type suitable for 1200/1400mm sweep ceiling fan, hum free, 120W, 2 module, hum free and connecting electrically, complete all as specified and directed.
10
-
-
... More
S&F in repair modular socket outlet 6 Amp, 2 module, complete all as specified and directed.
27
-
-
... More
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base floor etc., including demolition of existing floors complete all as specified and directed.
50
-
-
... More
M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
5
-
-
... More
M&L for TMT Mild steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
710
-
-
... More
M&L 50 mm dia sand cast CI cowls complete all as specified and directed.
6
-
-
... More
M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in copings of masonary work kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,, kneelers, apex stones,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, complete all as specified and directed.
0.5
-
-
... More
Description all as per srl item No. 100.00 here-in-before but for 5 pin 5 amp socket outlet point on independent board controlled by one switch 5 Amps one way complete all as specified and directed.
9
-
-
... More
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass (cutting in any shape) fixing with chromium plated bracket guard complete all as specified and directed.
9
-
-
... More
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.
60
-
-
... More
M&L 100mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps.complete all as specified and directed.
20
-
-
... More
Supplying and fixing single pointed air termination aluminium rod 12mm dia 300 mm long duly two holes drilled and suitable nuts and bolt for fixing with clamp complete all as specified and directed.
12
-
-
... More
M&L for preparation of untreated surfaces of steel & iron work of any description exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
4
-
-
... More
M&L for half brick thick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.
110
-
-
... More
S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3.
27
-
-
... More
M&L for copper strip 32 x 6 mm for earth gread of burried in ground complete all as specified and directed.
124
-
-
... More
S&F in repair modular socket outlet 6/16 Amp, 2 module, complete all as specified and directed.
18
-
-
... More
S&F in repalcement of LED building security light fitting 25 watts, IP 65, having pressure die cast aluminium alloy housing, prismatic polycarbonate cover, making connection with 3 core copper flexible cable of size 23/0.0076 including fixing of street light fitting galvanised iron bracket 0.90m long of suitable dia complete all as specified and directed.
2
-
-
... More
S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 45 x 70mm comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length (MS hold fasts/lugs or SS fasteners shall be paid separately) complete all as specified and directed Note :- i) WPC solid door / window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable but no extra payment on this account shall be made.ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.
36
-
-
... More
M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
50
-
-
... More
S&F pre-laminated lead free factory made 18mm (+ 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cum and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed. Note :- Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.
25
-
-
... More
M&L for cement concrete bed (1:3:6 type C-2) to 100mm dia drain pipes including packing under, and haunching
against the sides of pipes after they are laid and tested; complete all as specified.
30
-
-
... More
M&L for plain cement concrete 1:3:6 type B-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
2
-
-
... More
Description all as per srl item No. 100.00 here-in-before but for 15 amp socket outlet point using 4.00 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded FRLS cable including 4.0 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth wire complete all as specified and directed.
18
-
-
... More
Supplying and Fixing PP-R Ball valves (brass insert) of size for 25mm dia CPVC pipes as per requirement of the site complete all as specified.
4
-
-
... More
M&L for TMT Mild steel bars up to 12 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
550
-
-
... More
M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in surface channels & drains including demolition of existing drain etc., complete all as specified and directed
0.5
-
-
... More
S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.
10
-
-
... More
S&F in repair for modular switch piano flush button, single pole, one way, 10 Amps, 240 Volts AC with polycarbonate body, complete all as specified and directed.
127
-
-
... More
S&F "in replacement" MCB SP, 240 Volts, 6 to 32 Amps with repturing capacity 10 KA 'B' series complete all as specified and directed.
12
-
-
... More
M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.
765
-
-
... More
M&L for 2nd class hardwood as in plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 Sqcm but n.exc 25 Sqcm complete all as specified and directed.
60
-
-
... More
S&F in repair modular bell push button single pole 1 way 6 Amp, 1 module, complete all as specified and directed.
9
-
-
... More
M&L for 10mm thick rendering in CM 1:4 on top of roof slab, mixing and including WPC @ 3 % by weight of cement complete all as specified and directed.
250
-
-
... More
Description all as per srl item No. 100.00 here-in-before but for 5 pin 5 amp socket outlet point on same board controlled by one switch 5 Amps one way complete all as specified and directed.
18
-
-
... More
S&F MCB SPN, 240 Volts, from 32 to 40 Amps with repturing capacity 10 KA 'C' series complete all as specified and directed.
4
-
-
... More
Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.
95
-
-
... More
Supply only integral water proofing compound, complete all as specified and directed.
26
-
-
... More
S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
20
-
-
... More
S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
20
-
-
... More
S&F "as in repair" 150mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.
2
-
-
... More
Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
255
-
-
... More
S&F in repalcement of LED bulb 12 watts, 230 Volt complete all as specified and directed.
25
-
-
... More
S&F "in replacement" sheet metal enclosure DBs, double door, single pole & neutra with 200 Amps rated bus bar of 08 way with 240volts IP-54 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.
2
-
-
... More
M&L for replacement of sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral ) and run 6.0 sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drwan in rigid non metallic PVC conduit complete all as specified and directed.
Note :- The rate for connected type point wiring shall deemed to include the cost of cutting, chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plastered matching the surface by white wash/colour wash all as per existing finishes complete)
20
-
-
... More
Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.
24
-
-
... More
S&F for 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
20
-
-
... More
Supply, Installation, Testing and commissioning of 'Solar Hot Water System' basrd on indirect transfer of heat of capacity 500 LPD with electric back up (3 runs of 4 Sqmm PVC copper cable from DB to solar panel) confirming to ISI complete all as specified and directed. Note :- Rates are deems to be included transport and shifted up to roof top of the building.
4
-
-
... More
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
20
-
-
... More
S&F "as in repair" MS chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.
9
-
-
... More
S&F of surface mounted 1x20 Watt LED tube light fittings (4 feet long), prewired, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental friendly, energy saving efficient ready to use pack 20 Watt LED 6500 K and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed.
42
-
-
... More
S&F 100mm dia stainless steel grating doom with waste hole fixing in floors, complete all as specified and directed.
9
-
-
... More
M&L 100 mm dia Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type)
or with parallel branches complete all as specified and directed.
2
-
-
... More
M&L 100 mm dia sand cast CI Bends with ovel access door and jointed with neat cement paste complete all as specified and directed.
3
-
-
... More
Note for srl item No 141 to 145
1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be 70.
4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be 100 Lm/W.
6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 2 years guarantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for replacement/repair. 11. CA No. shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover.
-
-
-
... More
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed
13
-
-
... More
S&F "as in repair" 15mm bore (concealed type) stop valve, with long flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
9
-
-
... More
Taking down old/broken cast iron/PVC pipes of any dia from existing lines fixed to walls with clamps or laid in trenches (incl necessary excabvation) complete all as specified and directed.
30
-
-
... More
M&L for fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.
42
-
-
... More
M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying two coat of white wash complete all as specified and directed.
10
-
-
... More
M&L 35 mm thick single piece factory made wire gauge door shutter with and including 0.36mm nominal dia of wire and 1.40mm operture stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, size 19x19 mm complete in all respect with 160mm wide locking rail and 200mm wide bottom rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011
24
-
-
... More
M&L 75 mm dia Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type)
or with parallel branches complete all as specified and directed.
2
-
-
... More
M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:6, complete all as specified and directed.
1.75
-
-
... More
M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement complete all as specified and directed.
360
-
-
... More
M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete/sunken floors complete all as specified and directed.
1.2
-
-
... More
M&L for preparation of old surfaces of ceiling, roof projection and applying two coat of white wash complete all as specified and directed.
10
-
-
... More
M&L for preparation of old plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.
10
-
-
... More
M&L for 15mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and directed.
195
-
-
... More
S&F "as in repair" 20mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.
60
-
-
... More
S&F of surface mounted LED Bulk Head luminaires 9/10 watts with ABS body & polycarbonate diffuser available in CCT 6000K IP 54 complete all as specified and directed.
3
-
-
... More
M&L for preparation of old surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.
10
-
-
... More
M&L for cement concrete bed (1:3:6 type C-2) to 150mm dia drain pipes including packing under, and haunching
against the sides of pipes after they are laid and tested; complete all as specified.
180
-
-
... More
M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors,incl taking down existing pipes complete all as specified and directed.
120
-
-
... More
Hardcore of gauge n exc. 63 mm, deposited, spread and
levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
1.6
-
-
... More
M&L 50mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps.complete all as specified and directed.
25
-
-
... More
M&L for preparation of new surfaces of steel & iron work of any description exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer, complete all as specified and directed.
11
-
-
... More
S&F in repair modular bell push button single pole 1 way 16 Amp, 1 module, complete all as specified and directed.
18
-
-
... More
M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles complete all as specified and directed.
60
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements