Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Provn Of Six Men Gd Living Room With Washroom And Toilets At Dholewal Under Ge Ludhiana in Ludhiana, Punjab, with an estimated contract value of Rs. 24,00,000. The bid opening date for this tender is 31-10-2026 and the last date for bid submission is 21-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Punjab Tender

Opening Date31 Oct 2026
Closing Soon21 Nov 2026
Tender Amount₹ 24,00,000 
Notes
Download

Costs

Description

Provn Of Six Men Gd Living Room With Washroom And Toilets At Dholewal Under Ge Ludhiana

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Excavation in trencehes n exc 1.5 Mtr wide & N exc 1.5 Mtr deep for foundation and getting out in soft/loose soil complete all as specified.

25.8

-

-

... More
Excavation in trencehes soft/loose soil n exc 1.5 Mtr wide & n exc 1.5 Mtr deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete asll as specified and directed.

24.3

-

-

... More
Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 thick in soil complete all as specified and directed.

63.650000000000006

-

-

... More
Removal of surplus soil to a distance n exc 50 Mtr and depositing where directed at a level n exc 1.5 Mtr above starting point in soil complete all as specified and directed.

131.45

-

-

... More
M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.

6

-

-

... More
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified.

3800

-

-

... More
M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified.

200

-

-

... More
M&L for TMT bars 5mm and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips as in stirrups, spaces and binders complete all as specified.

700

-

-

... More
M&L Formwork to sides of rough finished surfaces concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

120

-

-

... More
M&L for RCC (M-25 Design Mix) (20mm graded crushed stone aggregates)) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.(formwork & reinforcement shall be measured and paid seperately)

27

-

-

... More
M&L for RCC (M-25 Design Mix (20mm graded crushed stone aggregates)) as in Columns, pillars, piers, posts and struts complete all as specified.

9.5

-

-

... More
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified & directed.

100

-

-

... More
M&L for formwork to soffits and sides of beam and lintels for rough finished surfaces of concrete flat complete all as specified.

99

-

-

... More
M&L for RCC(M-25 Design Mix) using 20 mm graded crushed stone aggregate) as in lintels, Beams, cantilevers, bressumers over 1.5 m span complete all as specified.(formwork & reinforcement shall be measured and paid seperately)

10

-

-

... More
M&L for formwork to edges of concrete flats exc 10 cm but n exc 20 cm wide as in roof slabs suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified.

60

-

-

... More
M&L for formwork to soffits of suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified.

130

-

-

... More
M&L for RCC (M-25 Design Mix, (20mm graded aggregates)) as in slabs supported on walls complete all as specified.

22

-

-

... More
M&L for rendering 5mm thick on fair faces of concrete surface in cement mortar (1:3) as in ceiling finished even & smooth without using extra cement complete all as specified.

130

-

-

... More
Preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified.

130

-

-

... More
M&L rendering 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule).

130

-

-

... More
Supply only integral water proofing compound (ISI marked approved).

5

-

-

... More
M & L for Precast cement concrete Block masonary (1:3 :6) type C1 20 mm graded with Solid Block , exc 10 CM in width and setting in Mortar (1 :6)

33.5

-

-

... More
M&L for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar (1:4) mixed with integral water proofing compound finished even & smooth without using extra cementfinished even & smooth without using extra cement complete all as specified.

180

-

-

... More
M&L rendering 10mm thick on cement or brick wall in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

180

-

-

... More
M&L prepration of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified & directed by Engineer-in- charge.

180

-

-

... More
Preparation of newly plastered surfaces and applying three coats of white wash complete all as specified.

220

-

-

... More
M &L for hardcore of broken stone boulders of gauge n exc 63mm , deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface in plinth protection complete all as specified.

12

-

-

... More
M&L 75mm thick cement concrete (1:3:6) type C2 ( 40mm graded stone aggregate) as in plinth protection finishexd even and smooth ( without using extra cement ) Complete all as specifed and directed by Engr -in-Charge.

20

-

-

... More
M&L precast concrete interlocking paver block with grey cement and pigment, any colour & shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over and including 25mm thick sand layer, including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

15

-

-

... More
M&L 75 mm thick PCC ( 1:4:8) type D-2 using 40 mm graded stone aggregates as in Sub base all as specified and directed.

15

-

-

... More
M&L for formwork to chullah hoods chajjas,troughs and similar items including edges of rough finished surfaces complete all as specified.

4

-

-

... More
M&L for RCC (M-25 Design Mix, (20mm graded crushed stone aggregates)) as in chajjas complete all as specified.

0.65

-

-

... More
M&L for 25 mm thick PCC (1:2:4) type B-1 with 20mm graded stone aggregate as in flooring, finished even and fair ,Complete all as specified and directed by Engineer-in-Charge.

125

-

-

... More
M & L for machine cut kota stone slab flooring 20-25mm thick laid on screed bed 15 mm thick in CM (1:4) and jointed with greay cement slurry mixed with pigment to match the shade of salb incl cutting, rubbing and polishing complete all as specified and directed by Engr-in-Charge

125

-

-

... More
All as per item 36 above, but in riser of steps, skirting & dado laid over 10mm thick cement screed in CM (1:4) complete all as specified and directed by Engr in charge.

7

-

-

... More
M&L for sand filling under floors or in foundation incl watering consolidation as directed Engineer-in-Charge.

15

-

-

... More
Supplying, filling in trenches, spreading, leveling sand cushioning 8cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed.

7.29

-

-

... More
M&L factroy for Box type steel window 1.25 mm made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass / wire mesh including fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately.

3.5

-

-

... More
All as per item no 24 sbove, but fixing with wire mesh.

2.5

-

-

... More
M&L for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

20

-

-

... More
M&L for 4mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete fixed in repair all as specified and directed by Engineer-in-Charge.

2

-

-

... More
All as per item no 43 above, but frosted glass of 3 mm thick complete all as specified.

1

-

-

... More
S&F for Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc., complete all as specified and directed by Engineer-in-Charge.

5

-

-

... More
M&L cement concrete 1:3:6 type Co (using 12.5 mm thick stone aggregate) as filled in door frame chamfered angles, Hold Fast and throating, complete all as specified and directed.

1

-

-

... More
S&F for factroy made plain framed pannelled door shutters 35mm thick 2nd class hardwood (two layer panel) and one coat of pink primer with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated all as specified and as directed.

2.5

-

-

... More
M&L for factroy made Glazed and skeleton shutters of 35 mm of 2nd class hardwood and one coat of pink primer, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified

2.5

-

-

... More
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

1.5

-

-

... More
M&L for preparation of new or previously untreated wooden surface of any description two coats of synthetic enamel paint including prepration to new wooden surfaces exc.10cm in width or girth complete all as specified and directed by Engineer-in-Charge.

6.5

-

-

... More
S&F 300mm,mild steel ordinary rat tail rod pattern springs including roller and roller plate, fixing with screw or welding to chowkhats complete all as specified and directed.

1

-

-

... More
M &L Providing, plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

1

-

-

... More
M&L Glazed ceramic coloured tiles (300x450mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4 complete all as specified.

40

-

-

... More
M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified.

20

-

-

... More
S&F vitreous china wash basin with vitreous white, flat back, size 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand and including supply and fixing of waste coupling ,waste pipe 32mm bore and PVC bend all as specified and directed.

1

-

-

... More
S&F PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float, flush pipe and handle and connection to pipe all as specified .

1

-

-

... More
S&F Wash down water closet (Pedestal pattern), complete white (including fixing bolts, seat cover) all as specified & directed by Engineer-in- charge.

1

-

-

... More
S & F health faucet (ABS Body) mild steel cromium plated suitable for 15 mm dia pipe 1.25 metre lomg flexible tube and ABS wall hook including making connections andfixed to in position etc complete all as specified and directed.

1

-

-

... More
S&F 15mm dia Pillar taps, cast copper alloy with capstan heads Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type etc. Complete all as specified and directed by Engineer-In-Charge.

1

-

-

... More
S&F mirror 600x450mm bevelled edge mirror selected qualtiy glass, 6mm thick AC board or commercial ply wood fixed to wooden ply with chromium plated brass screw and cup washers.

1

-

-

... More
S&F 15mm dia Chromium plated bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed. Complete all as specified and directed by Engineer-In-Charge.

5

-

-

... More
S&F PVC connection 15mm size with PTMT nuts of length 450mm etc. Complete all as specified and directed by Engineer-In-Charge.

6

-

-

... More
S&F 15mm bore stop valve/angle valve , fancy type with chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

5

-

-

... More
S&F 110 mmPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

5

-

-

... More
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-In-Charge.

3

-

-

... More
S&F 75 mmPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

4

-

-

... More
S&F 75mm bore PVC PVC (SWR) bend of any radius complete all as specified and directed.

3

-

-

... More
S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

3

-

-

... More
S&F Steel Tubes Medium Grade Bore of tube in 15mm galvanised with all fitting laid in trenches, walls, ceiling or laid in floors etc. Complete all as specified and directed by Engineer-in-Charge.

20

-

-

... More
S&F for galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.

6

-

-

... More
All as per item No 69 above, but of size of 20mm bore. Complete all as specified and directed by Engineer-In-Charge.

30

-

-

... More
S&F rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-In-Charge.

1

-

-

... More
S & F ball Brass valves high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20mm dia complete all as specified and directed.

1

-

-

... More
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, 20mm bore dia of pipe. Complete all as specified and directed by Engineer-In-Charge.

2

-

-

... More
M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing complete all as specified.

5.4

-

-

... More
M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.

2.5

-

-

... More
S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed by Engineer-in-Charge.

6

-

-

... More
S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

10

-

-

... More
S&F in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 250 mm complete all as specified and directed.

3

-

-

... More
S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engineer-In-Charge.

4

-

-

... More
M&L, cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to 150mm bore drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified & directed by Engineer-in- charge

35

-

-

... More
M&L, 150mm bore reinforced concrete pipe class NP3 laid in trenches including jointing & testing complete with collars complete all as specified & directed by Engineer-in- charge

35

-

-

... More
M&L, for Cutting into existing manholes for connecting new drains pipe of 150mm dia , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified & directed by Engineer-in- charge

2

-

-

... More
M&L precast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in manhole covers and the like set in cement mortar (1:4) duly placed on manholes complete all as specified

0.6

-

-

... More
M&L, cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, benching, haunching etc. complete all as specified and directed by Engineer-in-Charge.

0.2

-

-

... More
M&L PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in surface channels and drains all as specified

0.35

-

-

... More
M & L for Brickwork with sub class 'B' brick straight or curved on plan to any radius in half brick thick walls built in Cment mortar (1:6) as directed Engineer-in Charge.

12

-

-

... More
M&L 50 mm thick PCC (1:4:8) type D-2 (with using 40mm graded stone aggregate) as in sub base of floor complete all as specfied and directed.

10

-

-

... More
M&L chequerred cement concrete tiles 30cmx30 cm x25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment , including 20mm thcik screed bed in cement mortar (1:6) all as directed.

10

-

-

... More
Material & Labour for PolyUrethane Coating based waterproofing and heat reflecting system having following key performance properties: (a) UV resistant and resistant to yellowing and weathering (b) Highly elastic and crack bridging (c) Non-toxic and VOC compliant water based coating (d) One component ready to use (e) Excellent adhesion on porous and non porous substrates (f) Seamless waterproofing membrane (g) Water vapour permeable Note : The installation company of roofing system should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the roofing manufacturer can only be used with official approval from manufacturer. Procedure : Providing and applying primer over the prepared surface with Homeshield PU ROOFKOT or Equivalent. First coat: Material : Water = 1:1 by weight Total thickness: ̴̴ 0.4 – 0.5 mm Consumption: 0.25 kg/sqm. Reinforcement: Glass fiber mesh Second coat: Homeshield PU ROOFKOT or Equivalent. Consumption : 0.5 kg/sqm. Third coat: Homeshield PU ROOFKOT or Equivalent. Consumption: 0.5 kg/sqm.

120

-

-

... More
M & L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified

1.5147

-

-

... More
Boring of holes under road, pavement, hard standing by trenchless technique and necessary T&P for passing of LT/HT cables. complete all as specified and directed.

6

-

-

... More
Supply & fixing for galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.

50

-

-

... More
Supply & Fix for gun metel gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipe 25mm dia complete all as specified & directed.

1

-

-

... More
M &L for cutting the exiting GI 40/25 mm dia taking branch connection 25mm dia including necessary GI fittings/Specials.

1

-

-

... More
E/M Works

-

-

-

... More
M &L for point wiring with PVC insulated and PVC sheathed cable with copper conductor single core size of 1.5 sqmm in and including PVC conduit ISI marked concealed in walls etc, for one light / fan / bell point controlled by one switch including earth contiunity wire PVC insulated sheathed 1.5 sqmm solid copper conductor cable connected to common earth dolly all as specified. :-

-

-

-

... More
One light/fan point controlled by one, one way switch

28

-

-

... More
One switch socket outlet point 5 Amps on independent board

4

-

-

... More
One 3 Pin socket outlet , 5 Amps on the same board with other switch

5

-

-

... More
All as per item No. 96 above described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

3

-

-

... More
S&F 20 watt LED tube lighting fixture all as specified & directed by Engineer-in- charge.

11

-

-

... More
S&F 10 watt LED tube lighting fixture all as specified & directed by Engineer-in- charge.

7

-

-

... More
M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified.

15

-

-

... More
Supply and fix for SPN MCB DB 8 ways with Volt, Double door type complete all as specified and directed.

1

-

-

... More
S/F for MCB SPN 40 Amps, C-series complete all as specified and directed.

1

-

-

... More
S/F for SP MCB 6-32 Amps C-series complete all as specified and directed.

6

-

-

... More
Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed

17

-

-

... More
Supply and Fix Switch Piano,Flush type single pole , one way 5 Amp complete all as specified and as directed.

37

-

-

... More
Supply and Fix Socket outlet 3 pin, 5 A flush Piano,Flush type complete all as specified and as directed.

9

-

-

... More
S&F switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.

3

-

-

... More
M&L Socket outlet multi purpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified.

3

-

-

... More
Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, complete with all accessories such as safety valve, thermostate,NRV, connection piece with all fixing arrangement and grouting suitable size of nuts and bolts and making good to disturbed surface all as specified and directed.

1

-

-

... More
Supply and fix for exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V 50 HZ RPM 1200,copper winding of sweep 300mm complete all as specified.

1

-

-

... More
Supply and fix ceiling fan white colour complete with accessories 230V,1200mm sweep five star rated with brushless direct current motor(BLDC) complete all as speified and directed

5

-

-

... More
M&L for making hole using core drill suitable for exhaust fan as per item no 8 and making good to all disturbed surfaces and matching the same with adjoining specifications omplete all as specified and as directed.

1

-

-

... More
Supply and fix fan step regulator, 120W 1 module complete all as specified and as directed

5

-

-

... More
M &L Earthing complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

1

-

-

... More
Supply and fixing bldg security light fitting LED 35 W LED made up of pressure die cast aluminium housing with potted isolated driver and high power LED and indl lenses, oprating range- 90V to 340V AC. , IP66 with high power LED lamp incl bracket compete all as specified and directed.

4

-

-

... More
Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core Complete all as specified.

100

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.