Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Spl Repair To First Floor Toilets Of Kv School At Faridkot Mil Stn in Faridkot, Punjab, with an estimated contract value of Rs. 17,07,000. The bid opening date for this tender is 03-11-2026 and the last date for bid submission is 23-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Punjab Tender
Opening Date3 Nov 2026
Closing Soon23 Nov 2026
Tender Amount₹ 17,07,000
Costs
EMD
₹ 34,140Document Cost
₹ 500Tender Fee
Refer Documents
Description
Spl Repair To First Floor Toilets Of Kv School At Faridkot Mil Stn
Contact
Tender Id
2026_MES_797101_1Tender No
GE/FRD-80/2026-27Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store.
80
-
-
... More
Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store.
50
-
-
... More
Supplying and laying of 20mm nominal size CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and all other Brass fittings required except given in item number 55, 56,57and 58 on walls /ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified complete all as specified and directed by Engr-in-Charge.
Note : Pipes to be fixed on wall with and incl clamps of make Shaivi or equivalent in other brand made of galvanised carbon steel and having noise absorbing silicon rubber sleeve. Clamps to be fixed to wall with anchor fastner with nut and washer and full threaded bar of size M 10. Distace of two clamps should not be more than 1.00m complete all as specified and directed.
160
-
-
... More
Supplying and laying of 25mm nominal size CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and incl all other Brass fittings required on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified complete all as specified and directed by Engr-in-Charge.
Note : Pipes to be fixed on wall with and incl clamps of make Shaivi or equivalent in other brand made of galvanised carbon steel and having noise absorbing silicon rubber sleeve. Clamps to be fixed to wall with anchor fastner with nut and washer and full threaded bar of size M 10. Distace of two clamps should not be more than 1.00m complete all as specified and directed.
20
-
-
... More
S&F of 20 mm CPVC Brass Male/ Female Brass Threaded Adaptor fittings complete all as specified.
6
-
-
... More
S&F of 20 mm CPVC Brass Elbow fittings complete all as specified
42
-
-
... More
S&F of 20 mm CPVC Brass T fittings complete all as specified
42
-
-
... More
S&F of 20 mm CPVC Brass Union fittings complete all as specified
5
-
-
... More
S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.
15
-
-
... More
S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed
33
-
-
... More
S&F in repair Pillar taps, swan neck fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
8
-
-
... More
S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified
15
-
-
... More
S&F in repair vitreous china counter wash basins, size 470x470mm to be fixed over and incl granite & RCC slab minimum 650mm wide and 1000mm long including including 32mm waste fittings, CP bottle trap, waste pipe complete all as specified and directed. CERA SKU S2030115 OR SIMILAR AS APPROVED.
8
-
-
... More
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including P/S trap andconnection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor.
6
-
-
... More
Supply and fixing vitreous china premium/1st quality wall hung water closet incl soft close seat cover with P trap white/ivory/off white including reduction drain (for outgoing pipe) and flushing pipe, anti-siphonage pipe, etc. and making holes in wall cover as recommended by manufacturer for particular model, closed pattern with flat bottom etc. and including S & F all necessary accessories set like rag bolts/gel gasket/hinges, SS jet spray with 01 metre long PVC pipe with CP connector etc. as recommended by manufacturer for fixing, packing and taking down existing WC of any description/size complete in all respect as specified.
Make: Jaquar (Continental Series-CNS-WHT-963N) or Techno commercial equivalent of Make as mentioned under Appendix ‘B’.
4
-
-
... More
Supply and fixing concealed flushing cistern of PVC 8 litre capacity with dual flushing system, valve less syphonic action type, with inlet/outlet, ball valve, float, all internal components connection to pipe etc. and including S & F of all necessary accessories/installation kit and ‘S’ type drain pipe connection set for wall hung WC. Make: Jaquar (Concealed Cistern CIS-WHT-2400S, Flush Plate-JCP-CHR-812415) or Techno commercial equivalent of Make as mentioned under Appendix ‘B’.
4
-
-
... More
S & F PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make.
6
-
-
... More
S&F in repair vitreous china urinal size 265x335x695mm cat No S4020116 of cera or equivalent,white, incl all fittings, bottle trap, CP spreader, waste coupling and waste pipe complete all as specified and directed.
8
-
-
... More
S&F 1500mm x 750mm x 6mm mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified.
4
-
-
... More
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed.
16
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/
Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
80
-
-
... More
S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge. (Note : stainless steel butt hinges shall be paid seperately)
34
-
-
... More
S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete all as specified and directed.
48
-
-
... More
S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.
32
-
-
... More
S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.
32
-
-
... More
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed fixed complete all as specified
16
-
-
... More
Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/coat by using roller/brush to wall/ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.
Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality].
Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)
150
-
-
... More
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided.
32
-
-
... More
Water proofing treatment to sunken slab and adjjoining vertical surfaces as specified under :-
(a) Cleaning of sunen portion and roughining to receive treatment.
(b) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces (c) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer.
(d) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation.
(e) Applying second coat of chemical Pidifin 2K (Dr Fixit) / eqivalent @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.
Note: The plan area of floor shall be considered for payment.
90
-
-
... More
M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc.
36
-
-
... More
Dismantling and disconnecting existing CI / PVC soil waste/vent pipe 100/75 mm bore fixed to wall,laid in trenches incl all fittings & accessories
120
-
-
... More
S & F PVC -U , type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 100/110 mm dia, fixed to Wall / floor complete all as specified and as directed.
Note : pipe and fitting laid under floor shall be fixed and covered with PCC 1:2:4 type B1 complete.
70
-
-
... More
S & F PVC -U , type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 75 mm dia, fixed to Wall/ floor complete all as specified and as directed.
Note : pipe and fitting laid under floor shall be fixed and covered with PCC 1:2:4 type B1 complete.
50
-
-
... More
S & F 110 mm bore PVC (SWR) bends heavy grade of any radius / shoe fixed to PVC pipes as directed
22
-
-
... More
S & F 75 mm bore of pipe PVC (SWR) bends heavy grade of any radius / shoe fixed to PVC pipes as directed
22
-
-
... More
M&L for 75mm dia of long body PVC Floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified.
22
-
-
... More
M&LPVC (SWR) branch piece,single (single Y),75 mm bore, (equal or unqual), complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
M&LPVC (SWR) branch piece,single (single Y), 110 mm bore, (equal or unqual), complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
M&L PVC (SWR) junction single,(Single T), 75 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
M&L PVC (SWR) junction single,(Single T), 110 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
S&F in repairs PVC (SWR) vent cowl 110 mm complete all as specified and directed
6
-
-
... More
S&F in repairs PVC (SWR) vent cowl 75 mm complete all as specified and directed
6
-
-
... More
Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge
6
-
-
... More
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
6
-
-
... More
M&L for rendering 15mm thick in cement mortar in 1:6 on fare face of brick work or concrete surfaces even and smoothe without using extra cement
16
-
-
... More
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
160
-
-
... More
M&L for Preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engr-in-Charge
5
-
-
... More
S & F plain profile bracket (A3) to maintain gap of 100 mm from wall as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.
40
-
-
... More
S & F ribbed low carbon steel slotted ‘C’ channel (B2) as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.
5
-
-
... More
S & F ribbed low carbon steel continuous slotted ‘C’ channel (B3) as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.
5
-
-
... More
S & F U bolt type C2 suitable for PVC pipe of nominal outside diameter 110 mm as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.
15
-
-
... More
S & F U bolt type C4 suitable for PVC pipe of nominal outside diameter 75 mm as per HQ Chief Engineer Bathinda Zone drawing No. BTD-916, Sheet Nos 1/4 to 2/4 complete all as specified and as directed.
15
-
-
... More
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed by Engr-in-Charge.
29
-
-
... More
Taking down MCB/ MCCB of any make and making good to disturbed area all as specified and directed by Engr-in-Charge.
3
-
-
... More
Taking down submain wiring 2 run/ 4 run with earthing cable and making good to disturbed area.
200
-
-
... More
M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawn through and including concealed conduit and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and including modular box covered with modular top cover for mounting switches, sockets or fan regulators etc for the following :-
(a) One light point/ fan point/ bell point controlled by one switch
20
-
-
... More
(b) One socket outlet 5 Amps controlled by one switch on same board
3
-
-
... More
(c) One socket outlet 5 amps controlled by one switch on independent board
3
-
-
... More
All as per item No. here in before but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let on independent board.
3
-
-
... More
Supply and fixing of LED tube light fiting 20W, 230 V, wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-chrg.
20
-
-
... More
M&L ceiling rose 3 terminal / PVC / polycarbonate isolated body all as per specification and directed by Engineer-in-chrg.
20
-
-
... More
Supply and fixing Modular switch 1 way 6 amps one module switch all as specified and directed by Engr-in-Charge.
26
-
-
... More
Supply and fixing Modular socket 6A 2/3 pin, 2 module socket all as specified and directed by Engr-in-Charge.
6
-
-
... More
Supply and fixing Modular switch 1 way 16 amps 1 module switch all as specified and directed by Engr-in-Charge.
3
-
-
... More
Supply and fixing Modular socket 6A / 16A - 2/3 pin, 2 module all as specified and directed by Engr-in-Charge.
3
-
-
... More
Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB/MCB, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.
Note :- MCCB/MCB shall be measured and paid separately under appropriate item of BOQ.
1
-
-
... More
S&F of MCB DB confirming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.
3
-
-
... More
S&F MCCB 4 pole, 415 V. adjustable type, 100 Amp with breaking capacity 16 KA complete all as specified and directed.
1
-
-
... More
Supply and fixing in repair Isolator SPN 40 A including connections complete all as specified
3
-
-
... More
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection all as specified and directed by Engr-in-Charge.
14
-
-
... More
Material and labour for repair of submain wiring complete with 2 x 4.0 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x4 sqmm( same specification ) as earth wire including PVC conduit with all fittings not less than 25 mm dia complete all as directed.
164
-
-
... More
Supply and fixing exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge.
3
-
-

