Indian Army Tender

Bus Stands at Residential Complexes (i) Hard Standing Area 18 ft x 16 ft. (ii) Iron Structure and support including material and vertical and horizontal support. (iii) Polycarbonate sheet. (iv) Painting.

Hard standing area 18 ft x 16 ft (a) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, within all lead and lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all lead and lift. (b) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 20 mm nominal size derived from natural sources). (c) Providing and laying 60mm thick interlocking paver blocks (interlock tiles) M-35 grade, machine made rubber molded smooth finish by strong vibratory process or with hydraulic compaction machine and of approved size and design/ shape laid in ordinary grey color and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc.

Iron structure and support including material and vertical and horizontal support. Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per entire satisfaction (a) Pillar 10mm x 100 mm 14 gauge MS pipe 10 ft height including grouting 2 ft in ground supporting with 3 nos of 50mm x 25mm 14 gauge pipe as vertical support and 2 nos of horizontal supports. (b) Top structure of 50 mm x 25 mm (16 gauge) in half round shape for supporting polycarbonate sheet of 10 ft x 12 ft length supporting with three number of horizontal pipes of 50mm 25mm (16 gauge) and three nos of vertical support of 50 mm x 25 mm (16 gauge). (c) Top structure is supported with MS Pipe 50 mm x 50 mm 14 gauge of 12 ft length three numbers supported with 2 nos 60 mm x 60 mm 14 gauge pipes in horizontal to support the top polycarbonate sheet