Food Corporation Of India Tender

6 x 1.5 sq. Mm (DSR-22/1.17.6)

9 x 1.5 sq. Mm (DSR-22/1.17.9)

3 x 2.5 sq. Mm (DSR-22/1.17.12)

6 x 2.5 sq. Mm (DSR-22/1.17.15)

9 x 2.5 sq. Mm (DSR-22/1.17.18)

3 x 4 sq. Mm (DSR-22/1.17.21)

6 x 4 sq. Mm (DSR-22/1.17.24)

3 x 6 sq. Mm (DSR-22/1.17.30)

Supply and drawing 3core 1.5 sqmm PVC insulated FRLS and PVC round sheathed multi core copper conductor heavy duty industrial flexible cable complete with connection, testing etc as required.

Sub Head -III (Switchgear and earthing) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) (DSR 2022 - Item no.1.27.1)

3 Module (100mmX75mm) (DSR 2022 - Item no.1.27.2)

6 Module (200mmX75mm) (DSR 2022 - Item no.1.27.4)

8 Module (125mmX125mm) (DSR 2022 - Item no.1.27.5)

12 Module (200mmX150mm) (DSR 2022 - Item no.1.27.6)

Sub Head -III (Switchgear and earthing) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch (DSR 2022 - Item no.1.24.1)

15/16 A switch (DSR 2022 - Item no.1.24.3)

3 pin 5/6 A socket outlet (DSR 2022 - Item no.1.24.4)

6 pin 15/16 A socket outlet (DSR 2022 - Item no.1.24.5)

Bell push (DSR 2022- Item no 1.24.8 )

Supplying and fixing call bell/buzzer suitable for single phase ,230V complete as required.(DSR 2022- Item no 1.38 )

Sub Head -III (Switchgear and earthing) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door (DSR 2022 Item 2.3.1)

8 way , Double door (DSR 2022 Item 2.3.2 )

12 way , Double door (DSR 2022 Item 2.3.3)

Sub Head -III (Switchgear and earthing) Supplying and fixing of horizontal type three pole and nuetral sheet steel MCB distribution board, 415Volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc., as required (but without MCB/RCCB/Isolator ) 6 way (4 + 18), Double door (DSR 2022 Item 2.4.2)

Sub Head -III (Switchgear and earthing) Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB omplete with connections, testing and commissioning etc. as required. Single pole (DSR 2022 Item no.2.10.1)

Single Pole & neutral (DSR-22/2.10.2)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(DSR 2022 - Item no.1.25)

Sub Head IV - Cabling Works Supply of PVC insulated and PVC sheathed XPLE power cable of 1.1 KV grade armoured UG aluminium conductor cable conforming to IS 7098 part 1 with up-to-date amendment of the following size as required. CABLE SIZE 3 X 10 SQ.MM

Sub Head IV - Cabling Works Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle) (DSR 2022 -Item no.7.7.1)

Sub Head IV - Cabling Works Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. Mm (DSR 2022 item no. 7.5.1)

Sub Head IV - Cabling Works Supplying and fixing of light class G.I. pipe of 50 mm dia.(nominal) 3 metres length along the pole for protection of under ground cable as required. (DSR 2022 item no. 12.37)

Sub Head IV - Cabling Works Providing, laying and fixing 100mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required (DSR 2022 item no. 14.13.3)

Sub Head IV - Cabling Works Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. .direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) (DSR 2022 item no. 14.16.1)

Sub Head IV - Cabling Works Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 10 (22mm) (DSR 2022 item no. 9.1.7)

Sub Head -V ( Fittings ) Supplying, installation, testing and commissioning of 1x 20W Retrofit type Photon Ultra bright LED polycarbonate tubelight along with Industrial Box type Luminaire batten suitable for single T8 LED Tube on wall/truss for fixing LED tube including connection, testing as required.

Sub Head -V ( Fittings ) Supplying, installation, Testing and commissioning of 45 watt LED streetlight made up of pressure die cast housing with toughned glass/PC embedded lens and individual high power LEDs , IP65 or IP66 protection with impact resisitance of IK07/IK08 and fixing on truss /wall/ pole with suitable clamps and nut bolts including giving connection testing etc., at site of work as required.

Sub Head -V ( Fittings ) Supplying, installation, Testing and commissioning of 70 watt LED Well Glass fitting of Environmental friendly, IP protection energy saving long life corrosion resistant, vertical/horizontal surface mounting pressure die-cast aluminium well glass luminaires with high power LED as light source and fixing on truss /wall/ pole with suitable clamps and nut bolts including giving connection testing etc., at site of work as required.

Sub Head -V ( Fittings ) Supplying, installation, Testing and commissioning of LED flood light fitting of 50 watts , AC 240 volts made out of high quality allumium die cast moulding with professional optical design ,efficient high output LED for better distribution complete with all accessories etc. as reqd.

Sub Head -V ( Fittings ) Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required (DSR 2022 item no. 12.34)

Sub Head -V ( Fittings ) Supplying and fixing street light loop in loop out boxes with PVC Box of size 8"x6"x4" with 1 No. 6A SP MCB, 2/4 way strip connector i/c testing as reqd.

Supplying, Installation and fixing on site of hot dip galvanized octagonal pole of length 7metres (sheet thickness 3mm), top dia. 70mm and bottom dia 130mm. Pole should be supplied in one piece. The Pole Should be equipped with 1. Inspection door , it should have a triangle key that forces the door out when opening . 2. Bakelite terminal strip win din bar for MCB and stud terminals (for mounting inside base compartment of the pole). 3. Base plate welded to the lower part of the Pole from outside and inside to serve for fixing the Pole to R.C.C. foundation by means of four bolts, thickness of the plate shall not be less than 16 mm, and its dimensions shall not be less than 240mmx240 mm. 4. 4 nos of anchor bolts with j-shaped made of atleast M20 grade, each bolt provided with washers and 2 nuts and each bolt should be of minimum length of 700mm. 5.Pole should be fitted with Pipe cap type single arm pole bracket made with suitable cap pipe and 48.3 mm dia, 3.25 mm thick pipe arms and bracket length of 1000 mm. with suitable angle of tilt. the arm shall hold in its position by 4 nos of screws or as required. 6. C curve SPMCB of 6 Amp and 2/4 way strip connector shall be fitted inside the pole compartment . 7. An earthing connection point shall be provided inside the pole near the door opening Foundation: RCC foundation of size 550mmx550mmx1500mm of M20 Grade(1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)) with excavation by Manual or Mechanical means upto depth of 1300 mm and Steel Reinforcement with Cold Twisted Bars (Confirming to releveant Indian Standards amended upto date) should be made for installation of the pole and to ensure that the pole can withstand wind speed as per IS 875 Part III 2015 amended upto date without bending,breaking and failure. All the materials, Galvanization and coating should follow latest Indian or applicable standards amended upto date.

Supplying and fixing of 2m length of GI pipe of 15mm(Medium Class) on the poles to give protective covering to the electrical connection to the street light

Supply and fixing of 300mmX250mm size metallic frame cover fabricated with 25mm X 25mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply and fixing of 200mmX250mm size metallic frame cover fabricated with 25mm X 25mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply and fixing of 200mmX300mm size metallic frame cover fabricated with 25mm X 25mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply and fixing of 250mmX250mm size metallic frame cover fabricated with 25mm X 25mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply and fixing of 250mmX300mm size metallic frame cover fabricated with 25mm X 25mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply and fixing of 300mmX300mm size metallic frame cover fabricated with 25mm X 25mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply and fixing of 570mmX600mm size metallic frame cover fabricated with 35mm X 35mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply and fixing of 600mmX600mm size metallic frame cover fabricated with 35mm X 35mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply and fixing of 700mmX670mm size metallic frame cover fabricated with 35mm X 35mm X 5mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply and fixing of 970mmX650mm size metallic frame cover fabricated with 35mm X 35mm X 5mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Sub Head VII - Miscellaneous works Removing the existing aluminium wire from conduit, main board, sub-main boards, switch boards, tube light fittings etc., and shifting the same to stores etc., as required.

Dismantling of pole/street light standard/strut embedded in cement concrete foundation etc. as required.(DSR 2022 Item No. 12.42)

Sub Head VIII - Credit Items Less Credit for Old Dismantled Poles including transportation from site.

Sub Head VIII - Credit Items Less credit for dismantled old damaged PVC insulated Al wire including transportation and disposal of the same from the site.