Food Corporation Of India Tender

2x10 sq mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. ,Including Laying complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)(DSR 14.16.1)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.up to 35 sq.mm. (DSR 2022 item no 7.5.1)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 10 sq mm (22 mm) (DSR item no 9.1.7)

2 X 10 sq. mm (19mm) (DSR 2022 - Item no. 9.1.2)

Supplying and fixing street light loop in loop out boxes with PVC sintex Box of size 8"x6"x4" with 1 No. 6A SP MCB, 2/4 way strip connector i/c testing as reqd.

Providing, laying and fixing following dia G. I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required. 100 mm dia (DSR 2022 Item no.14.13.3)

Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 meter length along the pole for protection of under ground cable as required (DSR 2022 -Item no.12.37)

Supplying, installation, Testing and commissioning of 45 watt LED streetlight made up of pressure die cast housing with toughned glass/PC embedded lens and individual high power LEDs with secondary optics, IP65 or IP66 protection with impact resisitance of IK07/IK08 and fixing on truss /wall/ pole with suitable clamps and nut bolts including giving connection testing etc., at site of work as required.

Supplying, Installation and fixing on site of hot dip galvanized octagonal pole of length 7metres (sheet thickness 3mm), top dia. 70mm and bottom dia 130mm. Pole should be supplied in one piece. The Pole Should be equipped with 1. Inspection door , it should have a triangle key that forces the door out when opening . 2. Bakelite terminal strip win din bar for MCB and stud terminals (for mounting inside base compartment of the pole). 3. Base plate welded to the lower part of the Pole from outside and inside to serve for fixing the Pole to R.C.C. foundation by means of four bolts, thickness of the plate shall not be less than 16 mm, and its dimensions shall not be less than 240mmx240 mm. 4. 4 nos of anchor bolts with j-shaped made of atleast M20 grade, each bolt provided with washers and 2 nuts and each bolt should be of minimum length of 700mm. 5.Pole should be fitted with Pipe cap type single arm pole bracket made with suitable cap pipe and 48.3 mm dia, 3.25 mm thick pipe arms and bracket length of 1000 mm. with suitable angle of tilt. the arm shall hold in its position by 4 nos of screws or as required. 6. C curve SPMCB of 6 Amp and 2/4 way strip connector shall be fitted inside the pole compartment . 7. An earthing connection point shall be provided inside the pole near the door opening Foundation: RCC foundation of size 550mmx550mmx1500mm of M20 Grade(1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)) with excavation by Manual or Mechanical means upto depth of 1300 mm and Steel Reinforcement with Cold Twisted Bars (Confirming to releveant Indian Standards amended upto date) should be made for installation of the pole and to ensure that the pole can withstand wind speed as per IS 875 Part III 2015 amended upto date without bending,breaking and failure. All the materials, Galvanization and coating should follow latest Indian or applicable standards amended upto date.

Supply and fixing of 705 mmX 845 mm size metallic frame cover fabricated with 25mm X 25mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including fixing in wall including chasing and plastering complete as reqd.(For TPN DBs)

Supply and fixing of 595 mmX 705 mm size metallic frame cover fabricated with 25mm X 25mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including fixing in wall including chasing and plastering complete as reqd.(For SPN DBs)

Sub Head -II ( Wiring ) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A (DSR 2022 - Item no.1.10.1)

Supplying, installation, testing and commissioning of 1x 20W Retrofit type Photon Ultra bright LED polycarbonate tubelight along with Industrial Box type Luminaire batten suitable for single T8 LED Tube on wall/truss for fixing LED tube including connection, testing as required.

Sub Head VI - Cabling Works Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish Paint etc. as required. (DSR 2022 item no 12.34)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door (DSR 2022 Item 2.3.2)

Sub Head -III (Switchgear and earthing) Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB omplete with connections, testing and commissioning etc. as required. Single pole (DSR 2022 Item no.2.10.1)

Single pole and neutral (DSR 2022 Item no.2.10.2)

Providing and fixing of Triple pole Franklin rods copper lightning arrester having length 950 mm and having dia 12 mm and weight approx 1.3 kgType DTB 485 /R Number of protected pairs 1 Nominal voltage UN 6 V AC including base plate , holes as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.(DSR 2022 Item no.5.14)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(DSR 2022 Item no.5.6)

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.(DSR 2022 Item no.5.10)

Supply and fixing of 250mmX350mm size metallic frame cover fabricated with 25mm X 25mm X 3mm angle iron welded construction frame structured and 3.0mm thick M.S sheet cover plate with double hinges and locking arrangement including painting and fixing in wall including chasing and plastering complete and finishing as reqd.

Supply, installation, testing commissioning of 3 core sheathed flexible copper wire -1100 V insulated and sheathed with bare annealed copper conductor as per IS -694.

Dismantling of pole/Street light standard / Strut embedded in Cement conctrete foundation etc as required (DSR E&M 12.42)

Dismantling of overhead lines comprising of copper aluminium over head conductor GI wire , cross arms , insulators etc as required (DSR E&M 12.40)

Less Credit for Old Dismantled Poles including transportation from site.

Less Credit for Dismantled ACSR aluminium conductor wire