Department Of Local Government Tender

Providing and Fixing Plastic Trash Bin of ASTROKIDZ INC or Equivalent with ISI Approved1.25 M Height With MS holding Stand etc complete, as Per Design and Drawing and the Engineer-in- Charge.

Providing and Fixing Double Slide of OK PLAY EQUIPMENT or Equivalent with ISI Approved are made ROTO moulding (LLDPE Plastic) main structure 50mm Galvanised Pipe Platform Ladder Galvanised/Aluminium/ Sheet Ladder With railing pipe 20/25 MM NB GI Pipe. All Accessories etc. are Galvanised etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Providing and Fixing of the 4 seater See Saw of ASTROKIDZ INC or Equivalent with ISI Approved is fabricated on 50nb MS base Pipes with T handles on either side. The size of 4 seater see-saw is L-10’, B-2’ made up of Fibre and Steel etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Providing and Fixing PLAY CLUBBED UNIT of Roof,Slide, Panel,Decoration of OK PLAY EQUIPMENT or Equivalent with ISI Approved are made ROTO Moulded (LLDPE) Plastic. Main Structure Pipe 80MM NB Galvanised Steel Pipe. Platform, Ladder GI Sheet/Aluminium Chequered Sheet. Ladder With pailing, Climbing Pipe 20 & 25 MM NB GI Pipe. All Accessories Bolt, Nut etc. are Galvanised etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Each RCC BENCH Casted in M30 Grade with water proof & Anti corrosive consist of 2no L-Shaped base support of 100 mm thick (1000mm (Back Ht) X 450mm (Front Ht) X 620mm (Base width)) with Planks of 5 no (500mm X 100mm X50mm) & 1 no (1500mm X 200mm X 50mm),All Parts joined with galanvised Nuts & Bolts of suitable size and all bolts are sealed after assembly, etc complete, as Per Design and Drawing and the Engineer-in-Charge.

GYM EQUIPMENTS

Waist Shaper / Air Swing : Providing and fixing Waist Shaper / Air swing of ASTROKIDZ INC or Equivalent with ISI Approved in pair of size 1150x900x1400mm (APPROX) fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia all pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety . The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc complete, as Per Drawing and the Engineer-in-Charge

Triple Twister: Providing and fixing Triple twister of OK PLAY EQUIPMENT or Equivalent with ISI Approved of size 1400x1400x1350mm (APPROX) fabricated with main post of 114mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. base plate cover made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety . The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Air Walker: Providing and fixing of Air Walkar of OK PLAY EQUIPMENT or Equivalent with ISI Approved in pair of size 1100x550x1480mm (APPROX) fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia all pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated .All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety . The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal,seat and base cover plate and fixing of equipments etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Hip Twister and Stepper: Providing and fixing of Hip Twister and Stepper of ASTROKIDZ INC or Equivalent with ISI Approved in a combination of pair and a single step of size 1200x850x1500 mm (APPROX) fabricated with main post of 114 mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover to be made from plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety . The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Body Shaper / Elliptical exerciser: Providing and fixing Body Shaper / Elliptical exercise of ASTROKIDZ INC or Equivalent with ISI Approved of size 1220x550x1600 mm (APPROX) fabricated with main post of 114mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety . The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal,seat and base cover plate and fixing of equipments etc complete, as Per Design and Drawing and the Engineer-in-Charge.

CHEAST AND SHOULDER SHAPER :Providing and fixing of CHEAST AND SHOULDER SHAPER of OK PLAY EQUIPMENT or Equivalent with ISI Approved of size: 3.6M x 1.9M(APPROX) fabricated with main post of 100 NB GI B-class Pipe with seat frame of 32 NB GI B-CLASS Pipe and main frame of 40 NB GI B-CLASS Pipe and other parts like Handel Frame,Leg Rest,Handel cover, Seat and Back Rest, Bottom cover, Stopper, Pipe Cover, Bearing housing and Pin,Nut boults etc complete as per standards with Powder coat with 80 Micron thickness. etc complete, as Per Drawing and the Engineer-in-Charge.

Double Skier /Cross Walker: Providing and fixing Double Skier /Cross Walker of ASTROKIDZ INC or Equivalent with ISI Approved of size 1610x600x1600 m(APPROX)fabricated with main post of 114mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety .The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape wlded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Knee Chair : Providing and fixing Knee Chair of ASTROKIDZ INC or Equivalent with ISI Approved of size 740×600×960 mm(APPROX)fabricated with main post of 114mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety .The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Cycle : Providing and fixing Cycle of ASTROKIDZ INC or Equivalent with ISI Approved of size 850×490×1300 mm (APPROXfabricated with main post of 38mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety.The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material,shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc complete, as Per Design and Drawing and the Engineer-in-Charge

Leg Press : Providing and fixing of Leg Press of ASTROKIDZ INC or Equivalent with ISI Approved of size 2000x550x1600 mm (APPROX) fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety . The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc complete, as Per Design and Drawing and the Engineer-in-Charge.

CIVIL WORKS

C.C Block 400mm X 200mm X 200mm is made up of M20 mix, should be factory made vibro compacto blocks (Vibration and compaction both simultaneously). inculding frieght etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Supply, Laying of Earth Including Watering rolling etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required etc complete, as Per Drawing and the Engineer-in-Charge.

BOREWELL WITH PUMP AND ELECTRICAL WORKS

Supply and Fixing of M.S.Clamp set of 50 X 6mm flat iron with nuts and bolts etc,for holding the riser pipe assembly of submersible pump set etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Supply and Fixing of Tube well cover of M.S.Sheet (6mm thick) with nuts and bolts etc complete,for casing size of 200mm dia etc complete, as Per Design and Drawing and the Engineer-in-Charge.

P/F of Submersible Pump 55 mtr Head and Discharge 1200 LPM Approved Make etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Providing and laying ISI marked PVC insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required etc complete, as Per Drawing and the Engineer-in-Charge. 6.0 Sq.mm 3 core flat

Supply, installation, testing & commissioning of Outdoor Feeder Pillar (IP-55) fabricated with 14 SWG CRCA sheet steel havingdouble door with locking arrangement, rain canopy, detachable gland plate, segregated 100A TPN Al. bus-bar, terminal blocks for incoming & outgoing cable. The Feeder Pillar shall be installed at least 500 mm above ground level on brick foundation and complete with all accessories and as below etc complete, as Per Design and Drawing and the Engineer-in-Charge.

Incomer: 415 V PSPCL Energy Meter + 100 A TPN MCCB 25 KA with O/L, S/C & E/F protection, Voltmeter, Ammeter, selector switch, indication lamps complete as required - 1 Set Note :- Energy meter shall be supplied by PSPCL, Space and fixing arrangement for Energy Meter to be made in Cubical Panel. Outgoing: a) Automatic star-delta starter (30 HP pumpset) with MCB, Main and Aux Contactor, O/L relay, L/R Selector switch, 3 indicating lamps, start-stop push button, control MCB with panel & all accessories complete as required - 1 Set. (b) 7 KVAR heavy duty 3-phase MPP Type Shunt capacitor with 3 pole capacitor duty contactor, MCB complete as required. c) 6 to 32 A SP MCB - 3 No’s d) 32 A TPN MCB - 1 No etc complete, as Per Design and Drawing and the Engineer-in-Charge. a) Automatic star-delta starter (30 HP pumpset) with MCB, Main and Aux Contactor, O/L relay, L/R Selector switch, 3 indicating lamps, start-stop push button, control MCB with panel & all accessories complete as required - 1 Set. (b) 7 KVAR heavy duty 3-phase MPP Type Shunt capacitor with 3 pole capacitor duty contactor, MCB complete as required. c) 6 to 32 A SP MCB - 3 No’s d) 32 A TPN MCB - 1 No etc complete, as Per Design and Drawing and the Engineer-in-Charge.

WATER SUPPLY FOR PLANTS

Providing fixing of head unit control panel include complete fittings required to connect pump and filter with fittings like brass heavy duty valves(2nos.), gi tee /reducers /bend/ sockets etc complete, as Per Design and Drawing and the Engineer-in-Charge

Providing fixing of service saddle pvc heavy duty 40x20mm (make-kisan/prince/supreme) etc complete, as Per Design and Drawing and the Engineer-in-Charge.

HIGH MAST LIGHTING SYSTEM

Providing and Fixing of 12 Mtr High Mast Pole with Like Brackets as per Requirement, Supply & Fixing of 120 Watt LED Floodlight 6 Nos, Control Panal, Single Dome LED Aviation Obstruction Light, Lowering and Raising arrangement and Earthing Pit 2 nos for each High Mask Lighting System etc complete, as Per Design and Drawing and the Engineer-in-Charge.