Department Of Local Government Tender

Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means

Extra Carriage of C/A

Extra Carriage of F/S

Extra Carriage of C/S

Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick C.C 1:6:12 in foundation, first class brick work laid in cement sand mortar 1:5, 40mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12.50mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement 1mm thick left absolutely smooth polished and correct to template including cost of precasted RCC road gully grating and frame including paint with coal tar (as specified in item No. 29.49) complete and to the requirement of the Engineer-In-Charge. Single Road Gully chamber Size 610mm x 457mm x 800mm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per Earth work in filling including watering & compaction (Good Earth) Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointingvvand testing complete as per specifications. 200mm o/d pipe of 6 Kgf. / sqcm

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro- hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS Code 15658(2006) for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footpaths).

Precast Cement Concrete Kerb Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications