Border Security Force Tender

4 x 6 sq. mm + 2 x 6 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.2 Module (75 mm X 75mm)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 6 way,Double door

12 way,Double door

Supplying and fixing 5 amps to 32 Amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for lighting and other loads of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole Single pole

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and installation of 1 ton, 3 star rating invertor type split air conditioner and suitable for operating in 230 volt AC, 50 Hz with both outdoor and indoor unit with stand and all accessories including testing, commisioning complete as required.

Supply and installation of 1.5 ton, 3 star rating invertor type split air conditioner and suitable for operating in 230 volt AC, 50 Hz with both outdoor and indoor unit with stand and all accessories including testing, commisioning complete as required.

Supply and installation of 2 ton, 3 star rating invertor type split air conditioner and suitable for operating in 230 volt AC, 50 Hz with both outdoor and indoor unit with stand and all accessories including testing, commisioning complete as required.

Supplying and laying of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade of 3.5 x 70 sq. mm size direct in ground but excluding sand cushioning and protective covering and refilling the trench etc. as required.

Supplying and laying of one number PVC insulated and PVC sheathed/ XLPE, unarmoured power cable of 1.1 KV grade of 2 x 25 sq. mm size direct in wall etc. as required.

Providing and fixing of 25A motor starter fixture complete with all accessories .complete as required.

Providing and fixing of 19 mm waterproof and termite proof plywood of size suitable for mounting of 1/1.5/2 Ton AC including providing fixing of fastener of required size and number and painting in the existing surface.

SITC of various sizes water protected outdoor (Water proof) hut type compartmentalized type double door cubical panel both side opening having depth up to 600 mm suitable for 415 Volt, 3 phases, 50 Hz made out of 2mm thick CRCA sheet with required hardware duly painted with powder coated .Panel having separate detachable gland plate, angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), hinged door, both side opening with locking arrangement, earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 400A/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with 25% extra current carrying capacity of MCCBs and solid copper conductor cable 10 sqmm/ solid aluminium rod for MCBs (approved by Engg in charge) for incoming/Outgoing cables, links for spare MCCBs, heavy duty connectors/ terminals for three and single phase cable connections for MCCBs where as required and marking of location for incoming and out going distribution i/c grouting the legs in existing floor with 1:3:6 cement concrete foundation and dsimantling the existing panel, incoming/outgoing cable connections etc complete as required i/c dismentling the existing feeder pillar and UG cable. (Panel should be as per design & drawing approved by Engg in charge).LED light min 5 watt with on/off switch to be provided in the panel.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. as per item no 17 63 A, 16 KA,TPMCCB

100 A, 26 KA,TPMCCB

Supplying and fixing 40/50 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for lighting and other loads of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole