Bhakra Beas Management Board Tender

Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type (CSR item No. 10.13 ii) ( A&C-2)

Scraping White wash and colour wash (CSR item No. 8.31 a)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish (CSR Item No.16.65)

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (CSR item no. 16.63)

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm ( csr item no. 16.59) (A&C-1)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade( CSR item No. 16.17)

Roof treatment with water proofing material Dr. Fixit Newcoat/Roofseal Ultra as per Quotation specifications

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications (csr item No. 21.29)

Dismantling of floor tiles at any floor of the building laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs. Of the complex complete in all respect.[ CSR Item no.30.95 )

Scraping Cement plaster.[ CSR Item no.8.31 c )

12.5 mm thick cement plaster 1:4 [CSR item No. 15.9]

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.[CSR item No. 13.55]

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete[ CSR Item no.14.128]

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).[CSR Item NO.14.113(a)] Size 600x600 mm

Dismantling concrete Cement concrete plain1:2:4 mix (csr item No. 8.6 d )

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramp[ CSR Item no.14.88]

Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutters and down pipes. [ CSR Item no.8.11]

Ridges and valleys 45 cm overall, in plain G.I. Sheet 0.80mm fixed with galvanized iron J. and L. hooks 10mm diameter, G.I. Limpet and bitumen washers complete [ CSR Item no13.21]

Providing and fixing ( PPGL) pre-coated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminum alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm (+ 0.05 %) thick [ CSR Item no.13.27 iii (a) ]

Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead with cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm [CSR-item No.31.1 (a)]

Iron grated doors, including pintle hinges & arrangements [CSR-item No.18.5] for Grill and Gates 2 No. Gate with Railng

Providing and fixing P.V.C. wall Paneling as per drawing specification and entire satisfaction of engineer in charge ( Quotation attached)

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 Decorative with teak facing on both sides edges lipped with teak with laminated core (CSR 17.27 c iv )35mm thick

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt)For shutter area up to 0.50 sqm (CSR 17.23 i)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections confirming to IS:733 and IS:1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer-in-charge, fixed with rawl plugs and screws or fixing clips, or with expansion hold fasteners including necessary filling up of gapsat junctions, at top, bottom and sides with required PVC plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) A for fixed portion and chowkhats (CSR item No. 17.45) Wt. of aluminum section 4"x1 3/4" 14 gauge =1.75 Kg/Mtr. 30.65 Mtr.

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for B fixing of fittings wherever required including the cost of PVC plug/neoprene gasket required (CSR item No. 17.45) Wt. of aluminium section 4"x 1 3/4" 14 gauge= 1.75 Kg/Mtr.10.05 Mtr.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC plug/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) Float glass panes of 5 mm thickness (CSR item No. 17.47 i)

Providing & Fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm (CSR item No. 17.49 A)

Providing and fixing Charcoal wall paneling with complete as per the architectural drawings and the directions of Engineer-in-charge

REPLACEMENT OF WIRES, COVER RAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRIN SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01:(CSR item No.34.08 Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01) CSR item No.34.08) Wiring 6 Amp. wall socket point

Wiring 16/20 Amp. power plug control point

PVC INSULATED FR COPPER CONDUCTOR CABLES: (CSR item No.34.09) Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (CSR item No.34.09 Overall size 6 sq.mm (Un-sheathed)

Overall size 4 sq.mm (Un-sheathed)

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (CSR item No. 34.12) Heavy Gauge PVC Conduit Pipe 32 mm dia. (Flushed)

MINIATURE CIRCUIT BREAKERS/RCBO's/ RCCB's: (CSR item No.34.16) Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 50-63 amp. (10kA, Curve-C)

MCB Four Pole 50, 63amp. (10kA, Curve-C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's: (CSR item No. 34.17) Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates and circuitidentifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- (CSR item No.34.17) TP&N Horizontal Double Door Distribution Board 12 way each

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):- (CSR item No.34.15(xxxiv) Powder Coated Concealed Metal Box with Brass Lugs Six Module

DISMANTLING WIRING POINTS & FITTINGS:(CSR item No. 34.39) Dismantling old wiring points including necessary repairs to wall etc:-(CSR item No. 34.39) Wall socket, power plug point