Bhakra Beas Management Board Tender

Dismantling brick work tile masonry or tile lining. b) In cement. (Pb. C.S.R. Ref. No. 8.5) (b) (L/R)

Cement Concrete 1:5:10 with stone aggregate 40 mm gauge mixing by mechanical means using concrete mixer volumetric type ( Pb. C.S.R. Ref. No.10.9) ( b) (ii) (T/R)

Base course of floor consisting of 100 mm thick cement concrete 1:8:16 With stone aggregate 40mm gauge and 100mm fine sand filling (Using mechanical mixer for mixing of material) ( Pb. C.S.R. Ref. No.14.3) (T/R)

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. ( Pb. C.S.R. Ref. No.11.3(i)) (T/R)

Damp proof course 4 cm thick of cement concrete 1:2:4 with two coats of bitumen 20/30 penetration @ 1.65 Kg per sqm. Laid hot and sanded( Pb. C.S.R. Ref.No.10.26)

First class burnt brick work laid in cement sand mortar 1:6 in first storey up to 4 meters above plinth level. ( Pb. C.S.R. Ref. No.11.4(i)) (T/R) AOR attached

115 mm thick brick wall laid in cement sand mortar 1:4 without reinforcement in superstructure ( Pb. C.S.R. Ref. No.11.36) (T/R)

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. Size 600x600 mm (Pb. CSR Ref. No. 14.113 (a)) T/R

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (Pb. C.S.R. Ref. No. 9.8) (T/R)

Centering and shuttering for sides and soffits of beam, beams launchings girders, bressumers, lintels (Pb. C.S.R. Ref. No. 9.6) (T/R)

Cutting chase in brick wall in cement or in floor for embedding C.I. or C.I. pipes line and making good the same to its original condition size150mmx150mm) (Pb. C. S. R. Ref. No. 30.85) (b) (L/R) A & C Slip

Cutting chase in brick wall in cement or in floor for embedding C.I. or C.I. pipes line and making good the same to its original condition size 75mm x 75mm) (Pb. C. S. R. Ref. No.30.85) (a) (L/R) A & C Slip

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete (Pb. C.S.R. Ref. No. 18.18)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in super structure ( Pb. C.S.R. Ref. No. 10.22)

Terracing consisting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.. (Pb. C.S.R. Ref. No. 13.13)(i)

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified (Pb. C.S.R. Ref. No. 13.55)

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. (Pb. C.S.R. Ref. No. 13.45)

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3) (Pb. C.S.R. Ref. No. 13.51)

Providing and fixing 110 mm dia U.P.V.C Rain water pipe of 4 kgf/sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (Pb. C.S.R. Ref. No. 13.74) (T/R)

20mm thick cement plaster 1:6 in two coats work (Pb. C.S.R. Ref. No. 15.28) (T/R)

12.5 mm thick cement plaster 1:6 (Pb. C. S. R. Ref. No. 15.11) (T/R)

Cement pointing 1:2 deep variety (Pb. C. S. R. Ref. No. 15.59) (T/R)

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade (Pb. C.S.R.Ref.No.16.13) (T/R)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (Pb. C.S.R.Ref.16.17)

Providing and fixing aluminum work for doors ,windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to IS:733 and IS :1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap sat junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C. P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) : (Pb. C.S.R. Ref. No. 17.45)

(b) For shutters of doors, windows & ventilators including providing and fixing hinges /pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (Pb. C.S.R. Ref. No. 17.45) (b) (T/R)

Providing polyester powder coating 50 micron any colorued specified to aluminum section of various sizes including carriage of material from market to workshop & workshop to site of work (Pb. C.S.R. Ref. No. 18.48) (T/R)

Providing and fixing 12mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. (Pb. C.S.R. Ref No. 17.46) (ii ) (T/R)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminum snap beading shall be paid in basic item) (Pb. C.S.R. Ref No. 17.47) (ii) Float glass panes of 4 mm thickness (T/R)

Cost of Aluminum fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) (Pb. C.S.R. Ref No. 17.23) (ii) for shutter area above 0.50 Sqm. T/R

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (Pb. C.S.R. Ref. No. 17.49 (B) 250mm x 16mm (T/R)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (b) I.S.I Designation No. II (size of door 701 mm to 850 mm) ( Pb. C.S.R. Ref. No. 17.43 (b) (T/R)

Providing and fixing 12mm thick 150mm wide pelmets with 25mm dia. Aluminum rod and brackets including fixing with 25mmx3mm MS Flat 10cm long and PVC Plug etc. complete (a) Deodar wood (Pb. C.S.R. Ref. No. 17.37) a) (T/R)

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. With special quality paint(Pb. C.S.R. Ref. No. 16.16) (T/R)

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable numberof modules(Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20 Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point (With fan box)(Pb. C.S.R. Ref No. 34.01 (i) (b)) (T/R)

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface :- Wiring light point (Pb. C.S.R. Ref. No. 34.01) (ii) (T/R)

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface :- Wiring 3 Pin 6 Amp. Plug control comprising wall socket point (Pb. C.S.R. Ref. No. 34.01) (v) (T/R)

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface :- Wiring 3 pin 16/20 amp. Power plug control point (Pb. C.S.R. Ref. No. 34.01) (b)(vi)T/R

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 6-32amp. (10kA, Curve-C) (Pb. C.S.R. Ref. No. 34.16) (A) (ii) (T/R)

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) (Pb. C.S.R. Ref. No. 34.12 (x) (T/R)

Dismantling concrete (e) Reinforced Cement concrete Pb. C.S.R. Ref. No. 8.6 (e) (L/R)

Cement Concrete 1:2:4 (a) with stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type [Pb. C.S.R. Ref. No 10.13 (a) (ii)] T/R