Bhakra Beas Management Board Tender

Providing and laying Anti-skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS: 15622 of approved make Such as Kajaria, Nitco, Somany etc. in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. (As per CSR-2020 item No.14.72)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish / Highlighter / emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (As per CSR-2020 item No.14.127)

Scraping (a) White wash and color wash (As per CSR-2020 item No.8.31 (a)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty such as Assian, JK etc. by applying two or more coats to get required finish. (As per CSR-2020 item No.16.65)

Wall painting with plastic emulsion paint of approved brand such as Assian, Nerolac, Berger etc. and manufacturer to give an even shade (two or more coats) (As per CSR-2020 item No.16.63)

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. (As per CSR-2020 item No.16.13)

White Washing (Two or more coat) (As per CSR-2020 item No.16.2)

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded). (As per CSR-2020 item No.31.11)

Supply of Tiles (Tile size22.86 cm x 11.43 cm x 3.81 cm) [ @ 20% of total quantity] (As per AOR-I)

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, here specially specified. (As per CSR-2020 item No.13.55)

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. (As per CSR-2020 item No.13.45)

Removing and Refixing of Door (As per AOR-I)

Painting two or more coats with synthetic enamel paints such as Assian, Nerolac, Berger etc. in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. (As per CSR-2020 item No.16.18)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm (GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main "T" runnerwith suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm andsecondary cross "T" of length 600 mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture inthe grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T sections shall be Pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (As per CSR-2020 item No.13.80)

Providing Cool day light PVC square LED surface ceiling light (30W). (As per e-GeM)

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge

(a) Europeon/Indian/Orissa W.C (As per CSR-2020 item No.30.88 (a)

(b) PVC / China Ware Cistern (As per CSR-2020 item No.30.88 (b)

(c ) Wash Hand Basin / Urinal Pot (As per CSR-2020 item No.30.88 (C)

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. (a) Size 75 mm x 75 mm (As per CSR-2020 item No.30.85 (a)

Providing , laying, jointing, fixing and testing ISI marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti-corrosive bit mastic paint, testing, cutting, threading Inside building complete.

(a) 15mm i/d (As per CSR-2020 item No.28.35 (a)

(b) 20mm i/d (As per CSR-2020 item No.28.35 (b)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make such as Cera, Hindware parryware etc. (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.iii)Size 630mmx450mmx830mm (As per CSR-2020 item No.30.31 (iii)

Providing & Fixing in position 5mm thick beveled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) b. Size 550mmx400mm. (As per CSR-2020 item No.30.61 (b)

Providing and fixing in position Chinaware Indian Orissa water closet size 580x440 mm of approved make such as Cera, Hindware parryware etc.(to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. (As per CSR-2020 item No.30.2)

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make such as Cera, Hindware parryware etc (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (As per CSR-2020 item No.30.4)

Providing and fixing in position 15mm C.P. Pillar Cock foam flow of approved make (to the approval of Engineer-in-charge) (As per CSR-2020 item No.30.33)

Providing and fixing jet spray with 2’-6” long PVC pipe (a) With CP brass nut (As per CSR-2020 item No.30.8 (a)

Providing & fixing in position vitreous Chinaware white Indian make such as Cera, Hindware parryware etc flat back or angular lipped front small urinals size265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. (As per CSR-2020 item No.30.15)

a)Extra for providing and fixing G.I.32mm waste pipe for urinal including elbow, reducer etc. complete in all respect. (As per CSR-2020 item No.30.19 (a)

Providing and fixing in position C.P. brass soap dish of approved make such as Cera, Hindware parryware etc (to the approval of Engineer-in- charge) fixed into wall with rawl plugs and C.P. brass screws complete in all respect. (As per CSR-2020 item No.30.60)

Providing & Fixing in position 15mm i/d bib cock of approved make such as Cera, Hindware parryware etc(to the approval of Engineer-in- charge)complete in all respect. (i) C.P. brass bib cock long nose/long body foam flow without flange. (As per CSR-2020 item No.30.65 (A) (i)

Providing & Fixing in position stop cock / Angle valve of approved make such as Cera, Hindware parryware etc (to the approval of Engineer-in- charge) complete in respect. a) C. P. brass 15mm Concealed stops cock with flange. (As per CSR-2020 item No.30.66 (b)

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. (a)PVC tube connection of size 15mm x300mm with C.P. Brass nut. (As per CSR-2020 item No.30.72 (a)

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect. B) C.P. Brass Accessories. i) C.P. brass towel rail 600mm long. (As per CSR-2020 item No.30.69 (B) (i)

Providing and fixing vitreous chinaware pedestal of approved make such as Cera, Hindware parryware etc (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.i) Vitreous chinaware standard white pedestal for wash hand basin. (As per CSR-2020 item No.30.43 (i)

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make such as Syntax , Titus, Plasto, Orient etc. (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (i) Triple Layer Tanks (As per CSR-2020 item No.30.97 (A) (i)

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. (a) 15mm i/d Brass Ball valves (As per CSR-2020 item No.28.44 (a)

Providing and fixing in position automatic brass Ball Cock in tanks. (a) A Plastic Ball Cock with rod and Plastic Ball (i) 15mm i/d (As per CSR-2020 item No.30.96 (A) (i)

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- such as legrand, havells, Anchor etc.

(i) (a) Wiring fan point (Without fan box) (As per CSR-2020 item No.34.02 (i) (a)

(ii) Wiring light point (As per CSR-2020 item No.34.02 (ii)

(iii) Wiring call-bell point (As per CSR-2020 item No.34.02 (iii)

(v) Wiring 6Amp. Plug control comprising wall socket point (As per CSR-2020 item No.34.02 (v)

(vi) Wiring 16/20Amp. power plug control point (As per CSR-2020 item No.34.02 (vi)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (iii) Overall size 2.5sq.mm (Un-sheathed) such as Havelles india , Finox etc. (As per CSR-2020 item No.34.09 (iii)

SHEET METAL DOUBLE DOORDISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper bus bars, shrouded neutral bars, earth bars, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-(i) SP&N Double Door Distribution Board 4 way Each (As per CSR-2020 item No.34.17 (i)

SHEET METAL IRON CLAD SWITCHES: Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:- (ii) ICDP Switch 63amp., 415volts such as legrand havells Siemens etc. (As per CSR-2020 item No.34.18 (ii)

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (x) MCB Triple Pole 6-32amp. (10kA, Curve-C) such as legrand havells Siemens etc. (As per CSR-2020 item No.34.16 (A) (x)

DISMANTLING WIRING POINTS & FITTINGS: Dismantling old wiring points including necessary repairs to wall etc:- (i) Fan, light or call bell point (As per CSR-2020 item No.34.39 (i)

DISMANTLING WIRING POINTS & FITTINGS: Dismantling old wiring points including necessary repairs to wall etc:- (ii) Wall socket, power plug point (As per CSR-2020 item No.34.39 (ii)