Bhakra Beas Management Board Tender

Supply & erection of 'V' shape cross arm of MS channel 75mm x 40mm as per standard drawing. The item include supply and erection of half clamp made out of 50mm x 6mm flat including cost of nut and bolts as approved by Engineer-in-charge. As per CSR Item No. 34.38 (ix)

OVER HEAD DISTRIBUTION INSULATORS, STAY SETS & CRADLE GUARDS: NSULATORS: Supply and erection of insulators confirming to IS-2544 & 5350 (Test Certificates of CPRI) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. The job is to be completed as approved by Engineer-in-charge:- Shackle Insulator (Medium) As per CSR item No. 34.35 (i) (d)

Shackle Insulator 11.5KN

Supply stringing and sagging of aluminum conductor steel reinforced (ACSR) on poles including binding with insulators using aluminum wires complete as desired by the Engineer in charge of the site:-ACSR-WEASEL conductor (30 sq. mm) Size (6/2.55 Al.+1/2.55mm GI) As per CSR item No. 34.34 V (a) Labour rate

Supply stringing and sagging of aluminum conductor steel reinforced (ACSR) on poles including binding with insulators using aluminum wires complete as desired by the Engineer in charge of the site:-ACSR-RACOON conductor (80 sq. mm) Size (6/4.09 Al.+1/4.09mm GI) As per CSR item No. 34.34 V (c ) labour rate

MS CHANNELS/ FLATS: Supply and Erection of MS angle iron (Channel)/ MS Flats of suitable size with cutting, bending and necessary holes as desired by Engineer-in-charge at site:- MS angle iron size 50mm x 50mm x 5mm thick As per CSR item No. 34.38 (xv) (a)

Supply and erection of G.I. Pipe (A-Class) Single arm bracket of suitable length to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the existing surface/wall with 2nos. MS flat clamp 25mm x 5mm, 30cm long and 4nos. fastner 10mm x 75mm long with two coats of an approved aluminum paint complete in all respect as approved by the Engineer-in-charge at site:- Single Arm Bracket 1.5 metre Long GI Pipe 40mm Dia. As per CSR item No. 34.29 B II (b)

U-Bolt complete with Nut & washer 10-12mm

Nut & Bolts of sorts with washer

Clamp for GI Pipes (For street Light Bracket and GI Earth Wire)

Supply and erection of 3-Stepped steel tubular swaged and welded pole (410-SP-Mpa) of suitable length conforming to IS: 2713- (PART-II)-1980 (Steel tubes conforming to IS: 1161-1979, UTS 42 kgf/ Sq.mm) to fix up to a required planting depth below ground level in a hole of excavation about 45 cm dia. and suitable depth to fill up to 15 cm below G/L with 1:2:4 cement concrete mixture including painting of pole with two coats of approved aluminum paint as required:- Overall length 7 metre, with planting depth 1.25 metre, length of sections 4 metre, 1.5 metre and 1.5 metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 114.3mm x 4.5mm, 88.9mm x 4.05mm and 76.1mm x 3.25mm (Bottom, Middle and Top respectively) with approximate weight 73 kg. (410 SP-2) and base Plate weight 7.5 kg. of size 12mm thick about 30 cm dia. As per CSR item No. 34.31 (i)

Clamps for street light complete with nut & bolts.