Baba Farid University Of Health Sciences Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Technical
Technical
Financial
Technical Capacity
... View More
The required prior work experience for the bidder is related to the completion of similar works. The bidder should have completed similar works with a minimum value of: - 80% of one similar work, which is Rs. 3,40,01,275.00
- 50% of two similar works, which is Rs. 2,12,50,797.00
- 40% of three similar works, which is Rs. 1,70,00,637.00
Additionally, the bidder's available bid capacity should be more than the total value of their financial bid for works above Rs. 2.00 Crore. The Assessed Available Bid Capacity is calculated using the formula: Assessed Available Bid Capacity = (A * N* 2 - B), where A is the maximum value of Civil Engineering works executed in any one year during the last five years, N is the number of years prescribed for completion of the Project/Works, and B is the value of existing commitments and on-going works to be completed during the period of completion of the Project/Works.
Costs
EMD
₹ 8,50,100Document Cost
₹ 5,900Tender Fee
₹ 5,900
Summary
Construction Of Sarai And Main Enterance Gate Opposite Emergency Blocks Of Ggsmh, Faridkot
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DMER_132884_2Bid Award Id
ViewTender No
BFUHS/13/2025Tender Authority
Baba Farid University Of Health Sciences ViewPurchaser Address
-Website
http://http://www.bfuhs.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of Sarai and Main Enterance Gate Opposite Emergency Blocks of GGSMH, Faridkot
Construction of Sarai and Main Enterance Gate Opposite Emergency Blocks of GGSMH, Faridkot
Financial bid for construction of Sarai and Main Enterance Gate Opposite Emergency Blocks of GGSMH, Faridkot
BOQ Items
... More
Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed
126.35
2946
372307.96
... More
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including
excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/ 103.5mm (Outer/ Inner dia.) CSR 34.37 B (iV) (244 + 5.35% Rs 257.05 )
380
257
97679
... More
Extra rate of shuttering at first floor
166.99
10
1760.07
... More
Electrical Work Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure . The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm The base channel will be made out of 75 x 40 x 5mm rolled channel. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The fabrication should be such that all the member it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.Painting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint after necessary putty work . Busbars:-The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity Metering:-The panel shall be completed with digital metering unit (Manufacturer of Panel should be CPRI Approved & ISO certified The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site. Speecfication As per CSR 2020 . LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 10Nos. outgoing MCCB's 40amp. to 160amp. according to the requirement at site (Approx. size 2025 x 1800 x 400mm) CSR 34.23 A Vi ( 117700 + 15 % Rs 135355 +5.35% Rs 142596.49 )
1
142596
142596.49
... More
Extra rate of Steel work at First floor
433.38
13
5937.31
... More
CPVC SDR 11 pipe & Fittings 25mm
390.24
224
87499.61
... More
Elbow 90 Degree (All side socketed)
128
162
20808.96
... More
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 25mm i/d
16
198
3181.12
... More
Extra rate of brickwork at first floor
251.05
153
38614
... More
Extra rate of RCC at second floor
72.54
381
27664.58
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
531.87
898
477959.66
... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths).
35.2
679
23918.75
... More
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping using mechanical mixer for mixing of material
1478.72
209
310087.58
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
64
191
12271.36
... More
TP&N Horizontal Double Door Distribution Board 6 way each CSR 34.17 (Vi) (2965 + 15 % Rs. 3409.75 +5.35% Rs 3592.17 )
4
3592
14368.68
... More
Extra rate of brickwork at second floor
73.47
307
22600.84
... More
115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure
254.6
643
163822.37
... More
Elbow 90 degree (all side socket)
224
120
27065.92
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade
557.69
69
38776.19
... More
Reinforced cement concrete M-25 with cement @425/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in superstructure. including cost of mechanical mixer and vibrator
788.43
7182
5663174.43
... More
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
3.24
10798
34988.6
... More
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs MCB Single Pole 6-32amp. (10kA, Curve-C) 34.16 A ii (134.00 + 35 % = Rs.180.90 + 5.35% = Rs.190.57)
88
190
16770.16
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge overall size 4 sq.mm (Un-sheathed) 34.09 iv (39 + 30 % = 50.70 + 5.35% = Rs.53.41)
1900
53
101479
... More
Main Gate with gate pilars
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation
52.33
191
10033.23
... More
P Trap/Floor Trap 110mm x 75mm
160
309
49598.4
... More
MCCB Four Pole 400 amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting CSR 34.23 C (VIII) (23143 + 40 % Rs.32400.20 + 5.35% Rs 34133.61 )
2
34133
68267.22
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.
C.P.brass 15mm Concealed stop cock with flange.
32
1268
40589.12
... More
Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. (762.00+20%)
1814.97
963
1748396.9
... More
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) 34.12 X (48.00 + 40% = Rs. 67.20 + 5.35% = Rs.70.79)
550
70
38934.5
... More
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
84.24
10798
909703.55
... More
plain Tee
80
206
16492
... More
first class burnt brickwork laid in cement sand mortar 1:6 in foundation and plinth.
266.99
4931
1316562.4
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps
58.57
3455
202387.46
... More
Damp proof course 4 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration @ 1.65 kg per sqm laid hot and sanded
112.46
377
42488.51
... More
Providing and laying earth filling under floor
349.94
389
136200.15
... More
First class burnt brick work laid in cement sand motor 1:5 in foundation and plinth
3.04
5281
16054.85
... More
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc . MCCB Four Pole 100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting CSR 34.23 C (ii) (4493 + 40 % Rs.6290.20 + 5.35% Rs 6626.72 )
6
6626
39760.32
... More
Extra rate of shuttering at first floor
458.47
10
4832.27
... More
Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
For 110mm o/d pipesSingle Tee With Door
32
236
7562.24
... More
Cement concrete 1:8:16 with 40mm gauge stone ballast using mechanical mixer
33.38
3894
130007.76
... More
Supply & erection of wiring light point 34.02 ii (579.00 + 25% =Rs.723.75 + 5.35 % = Rs.762.47)
160
762
121995.2
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
1890.33
400
756755.81
... More
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
80
142
11377.6
... More
20mm thick cement plaster 1:5 on walls inside
1908.38
263
502629.12
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
1434.04
221
317267.01
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
32
87
2798.08
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame complete as per standard design. 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
16
12120
193928.32
... More
Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaquar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Crompton including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site. (BFUHS/UWD/2019/10622 Dt 27/5/2019)
150
521
78150
... More
Aluminium thimble cable Core size 120 sq.mmCSR 34.38 A (Vi) (35 + 5.35% Rs 36.87)
50
36
1843.5
... More
Wire gauze door shutter with Kail wood without springs housed in chowkats (Single Leaf) 35 mm thick
106.95
3215
343874.2
... More
Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notchprovision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge
Door and window frame of size 113mmx60mmx with 35mm wide single rebate (620.00+20%)
121.75
783
95427.65
... More
Extra rate for kota stone at first floor
387.03
3
1223.01
... More
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
18.53
10798
200104.54
... More
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position 35mm thick Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-
135.92
2430
330342.69
... More
Reinforced cement concrete M-25 with cement @425/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in foundation and plinth
267.64
6392
1710947.58
... More
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc SP&N Double Door Distribution Board 4 way each CSR 34.17 (i) (909 +15% = Rs.1045.35 +5.35% = Rs.1101.27 )
8
1101
8810.16
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
13352.57
84
1125354.6
... More
Wiring 6Amp. Plug control comprising wall socket point RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES 34.02 (V) (282.00 + 25% Rs.352.50 + 5.35% = Rs.371.35)
70
371
25994.5
... More
Extra rate of shuttering at second floor
242.47
10
2555.63
... More
10mm thick plaster 1:4 on RCC work
2760.73
174
481333.28
... More
C.P.brass 15mm Angle valve without flange
48
870
41769.12
... More
Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including
making necessary connections completely:- Aluminium thimble cable Core size 240 sq.mmCSR 34.38 A (Viii) ( 52 + 5.35% Rs 54.78 )
20
54
1095.6
... More
Extra rate of shuttering at first floor
827.95
10
8726.59
... More
Extra rate for kota stone skirting at first floor
96.66
3
305.45
... More
Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect. Glazing area above 0.09 sqm
222.67
703
156701.79
... More
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
160
66
10619.2
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 6sq.mm (2Core) Un-armoured (On-Surface) CSR 34.10 C (i) ( 65 + 25 % Rs 81.25 +5.35% Rs 85.59
190
85
16262.1
... More
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation
1216.74
191
233297.73
... More
Extra rate of shuttering at first floor
1225.73
10
12919.19
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge overall size 1.5 sq.mm (Un-sheathed) 34.09 ii (18 + 30 % = Rs.23.40 + 5.35% = Rs.24.65)
950
24
23417.5
... More
Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- MS Sheet Enclosure having provision for MCCB 200-630Amp.with extended rotary handle (Approx. Size 750mm x 300mm x 250mm) CSR 34.23D (b) ( 4218 + 40 % Rs 5905.20 +5.35% Rs 6221.12
1
6221
6221.12
... More
Extra rate for tile work at first floor
531.87
3
1680.71
... More
Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)
314.69
128
40447.11
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm
743.22
1436
1067984.84
... More
Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of
40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects
152.21
956
145601.04
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. 100mm internal Diametre H.C.I. gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
32
2466
78931.2
... More
Extra rate of RCC at first floor
361.15
190
68864.08
... More
90mm o/d
160
85
13713.6
... More
Extra rate for screed at first floor
1478.72
3
4672.76
... More
Supply and erection of Heavy duty Exhaust Fans 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. Make: Crompton EXHD300-6-1, Havells Turbo Force SP, Anchor Anmol Heavy Duty (BFUHS/UWD/2021/25524.30 Dt 20/12/2021)
13
3501
45513
... More
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings. For shutter area up to 0.50 sqm
282.18
261
73725.17
... More
MCCB Four Pole 160 amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting CSR 34.23 C (iv) (6877 + 40 % Rs.9627.80 + 5.35% Rs 10142.88 )
4
10142
40571.52
... More
12.5mm thick cement plaster 1:5 on walls
1908.38
192
367916.58
... More
Supply & erection of wiring 16Amp. Plug control comprising wall socket point RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES 34.02 (VI) (363.00 + 25% =Rs.453.75 + 5.35% = Rs.478.02)
45
478
21510.9
... More
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
6329.38
95
606797.66
... More
Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3
40
721
28845.2
... More
First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.
516.81
5075
2623043.31
... More
Extra rate of shuttering at second floor
147.51
21
3108.04
... More
Extra rate of shuttering at first floor
814.22
10
8581.88
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications Overall size 240sq.mm (3½ Core) Un armoured (Loose) 34.10 D XIX ( 741 + 25% = Rs. 926.25 + 5.35% = Rs.975.80)
380
975
370804
... More
Supply and erection of LED flood light 100 watt with high pressure die cast housing lumens 110-120, AC220-240V, 50/60Hz(IP 65 Protected) of Make Havells / Cromption / Philips The fitting will be mounting with the help of necessary arrangement for installation on the top parapet of the building including connections, testing & commissioning etc. complete in all respects as per satisfaction and desired by the Engineer-in-charge at site.
12
6050
72600
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
16
5035
80571.68
... More
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. C.P. Brass khunti with 4 pegs
64
482
30880
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
1473.64
1107
1631658.42
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge )
110mm o/d
160
101
16203.2
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C) CSR 34.16 A (XVi) (1231 + 35 % =Rs. 1661.85 + 5.35% Rs. 1750.75 )
4
1750
7003
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
7023.19
79
554902.24
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Double Layer Tanks
16000
9
147040
... More
Cement concrete 1:2:4 With stone ballast or shingle by mixing by mechanical means using concrete mixer volumetric type
10.2
5653
57661.52
... More
Providing & Fixing in position mirror of superior glass Size 1500mm x 600mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50mm size (of approved quality and shade) with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respect
16
718
11495.84
... More
Centering and shuttering for faces of walls, partitions reatining walls and the like (Vertical or battering) including attached pilasters, buttresses etc. when curved.
500.98
468
234864.43
... More
MCB Double Pole 40amp. (10kA, Curve-C) CSR 34.16 A (VII) (555 +35% =Rs. 749.25 +5.35% = Rs.789.33 )
8
789
6314.64
... More
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications Heavy Gauge PVC Conduit Pipe 40 mm dia. (Flushed) 34.12 XII ( 87.00 + 40% = Rs. 121.80 + 5.35% = Rs.128.31)
150
128
19246.5
... More
Supply and erection of sheet metal Iron Clad Changeover Switch on existing surface with G.I. bolts & nuts/rag bolts and nuts etc., according to the size of holes in the body of the switch including connections with suitable size of thimbles and bonding to the existing earth as per PWD General Specifications: ICDP Switch 32amp., 415volts CSR 34.18 (i) ( 1158 + 35 % Rs 1593.30 +5.35% Rs 1646.93
1
1646
1646.93
... More
90mm o/d SWR UPVC pipe lines laid complete
341.28
344
117635.8
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
2629.42
560
1473684.73
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
385.78
64
24875.09
... More
Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to
IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:- SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement water tight cover with locking arrangement CSR 34.33 (vii) (a) (724 + 5.35 % = Rs .762.73)
12
762
9152.76
... More
Reinforced cement concrete M-25 with cement @425/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in foundation and plinth
0.9
5673
5105.79
... More
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
32
116
3730.56
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
418.1
29
12333.95
... More
Terracing consiting of tiles 22.86x11.43 x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.
1297.02
731
948705.28
... More
Extra rate of shuttering at second floor
166.99
21
3518.48
... More
Extra rate for granite work at first floor
29.29
3
92.56
... More
For 90mm o/d pipes Single Tee With Door
128
216
27750.4
... More
Kail wood doors shutter and window shutter panelled, glazed or glazed and panelled including hinges screws chokes cleats and cords etc. complete Fixed in position. 35 mm thick
73.13
3772
275888.78
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
654.58
7876
5156067.75
... More
Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc.completely:- Copper thimble cable Core size 10 - 16sq.mm CSR 34.38 B (ii) (22 + 15 % Rs 25.30 +5.35% Rs 26.65)
80
26
2132
... More
Extra rate for kota stone at second floor
38.46
6
243.07
... More
Providing and fixing in position automatic brass Ball Cock in tanks. 20mm i/d
16
406
6507.84
... More
Public Health Work
EXTERNAL IN THE GROUND : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes
jointing of pipes & fittings with one step CPVC solvent cement, & testing of joints excluding cost of excavation complete as per direction of Engineer-in-Charge
CPVC SDR 11 Pipe & fittings 20mm
292.16
175
51209.8
... More
Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages compl. 25mm i/d Gun Metal peet valve heavy pattern
16
814
13028.96
... More
Extra rate of shuttering at second floor
177.95
21
3749.41
... More
Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge )including cutting, jointing, wastage, but excluding cost of lead jointing. (Type - B) 110mm o/d SWR UPVC pipe line laid complete
243.84
396
96599.65
... More
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Supply & erection of Wiring fan point (With fan box) 34.02 I b (919.00 + 25% =Rs.1148.75 +5.35% = Rs.1210.20)
60
1210
72612
... More
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation Earthing with 25mm x 3mm Copper Tape (upto 8Metre in Length) 34.14 ii b (9906 + 40% = Rs.13868.40 + 5.35% = Rs.14610.35)
4
14610
58441.4
... More
Centring and shuttering for parapet, fascias and other similar items including edges
1258.64
547
689508.16
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. brass Bib cock long nose/ long body foam flow without flange
48
1214
58305.12
... More
Vent Cowls
32
45
1452.8
... More
Extra rate of shuttering at second floor
45.71
21
963.11
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. (size 75mmX75mm
682.72
72
49626.92
... More
Providing and fixing jet spray with 2'-6" long PVC pipe With C.P. Brass nut
16
501
8023.52
... More
Earth filling under floor 9" layer from outside including loading unloading,5Km lead, watering compaction, complete
1012.96
389
394254.16
... More
Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compation of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge.
392.35
848
332740.26
... More
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to
give an even shade including rubbing down old paint
39.58
67
2668.48
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
32
119
3809.6
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. C.P. Brass extension piece, 25mm long to 50mm long
96
112
10821.12
... More
Dismantling brick work tile, masonary or tile lining in cement
6.89
718
4950.4
... More
Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
1023.11
1157
1184556.76
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling.
1071.95
492
528074.73
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge overall size 10 sq.mm (Un-sheathed) 34.09 VI (88 + 30 % = 114.40 + 5.35% = Rs.120.52)
480
120
57840
... More
Supply and erection of Ceiling Fan 1200mm (48") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High Speed Opel White, Anchor XL code14067 WH, Havell's Velocity HS (BFUHS/UWD/2021/25524.30 Dt 20/12/2021)
60
2201
132060
... More
Centring and shuttering for columns (Square or rectangular or polygonal in plain)
1159.42
502
582631.74
... More
Providing and fixing ball bearing for push and pull type rolling shutters, from 9.20 to 12 sqm area
16
1324
21188
... More
12.5mm thick cement plaster 1:4 on wallsoutside
3568.65
201
718083.75
... More
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 20mm i/d Brass Ball valves
16
356
5708
... More
Vent Cowls
32
37
1204.16
... More
Extra rate for tile terracing at 1st floor
1297.02
3
4098.58
... More
Extra rate of 115 mm thick brickwork at first floor
254.6
15
4022.68
... More
Plastering on underside of ceiling/ RCC work with 10 mm thick cement plaster 1:3
3206.43
195
626600.55
... More
Cement concrete 1:5:10 with 40 mm gauge stone ballast using mechanical mixer
126.1
4141
522292.33
... More
Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing
240.2
1408
338328.91
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements