Baba Farid University Of Health Sciences Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 5,82,460Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_DMER_34029_1Bid Award Id
ViewTender No
BFUHS/296/2019Tender Authority
Baba Farid University Of Health Sciences ViewPurchaser Address
-Website
http://http://www.bfuhs.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Advertisement for tender for construction of SC girls Nurses Hostel in UCON at Faridkot
price bid for tender for construction of SC girls Nurses Hostel in UCON at Faridkot
tender for construction of SC girls Nurses Hostel in UCON at Faridkot
BOQ Items
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.Columns Footing
207.98
-
4845.81
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.Total Ground Floor + First Floor + Second Floor + Third Floor + Fourth Floor
567.16
-
5251.11
Extra rate for First Floor
140.56
-
40.8
Extra rate for Second Floor
140.56
-
81.6
Extra rate for Third Floor
136.59
-
122.4
Extra rate for Fourth Floor
7.02
-
163.2
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
425.64
-
158.31
Centring and shuttering for columns (Square or rectangular or poly gonal in plain)Total Ground Floor + Second Floor + Third Floor + Fourth Floor
738.48
-
242.01
Extra for First Floor
164.32
-
2.7
Extra for Second Floor
164.32
-
5.4
Extra for Third Floor
156.96
-
8.1
Extra for Fourt Floor
12.64
-
10.8
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.Total Ground Floor + Second Floor + Third Floor + Fourth Floor
2233.38
-
204.01
Extra for First Floor
555.93
-
2.7
Extra for Second Floor
555.93
-
5.4
Extra for Third Floor
521.37
-
8.1
Extra for Third Floor
26.15
-
10.8
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Total Ground Floor + Second Floor + Third Floor + Fourth Floor
1313.52
-
188.73
Extra for First Floor
326
-
2.7
Extra for Second Floor
326
-
5.4
Extra for Third Floor
318.08
-
8.1
Extra for Fourth Floor
18.16
-
10.8
Centring and shuttering for carbels, parapet, fascias and other similar items including edges.Total Ground Floor + Second Floor + Third Floor + Fourth Floor
220.88
-
367.32
Extra for First Floor
50.96
-
2.7
Extra for Second Floor
50.96
-
5.4
Extra for Third Floor
68
-
8.1
Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or bartering including attached pillasters buttersses etc Total Ground Floor + Second Floor + Third Floor + Fourth Floor
383.76
-
269.06
Extra for First Floor
80.73
-
2.7
Extra for Second Floor
80.73
-
5.4
Extra for Third Floor
80.73
-
8.1
Brick jali with 22.86cm x 11.43cm thick alternate layers laid in cement sand mortar 1:4 using 58 number bricks. Total Ground Floor + First Floor + Second Floor + Third Floor
93.92
-
224.35
Extra for First Floor
23.48
-
2.4
Extra for Second Floor
23.48
-
4.8
Extra for Third Floor
23.48
-
7.2
Plastering on underside of ceiling 10 mm thick cement plaster 1:4
1793.94
-
102.76
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
105.6
-
3519.43
Damp proof course 4 cm thick of cement concrete 1 : 2 : 4 with 2 coats of bitument 20/30 penetration at 1.65 kg per Sqm. laid hot and sanded.
54.45
-
284.66
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.. Total Ground Floor + Second Floor + Third Floor + Fourth Floor
326.06
-
3800.63
Extra rate for First Floor
79.59
-
84.48
Extra rate for Second Floor
77.38
-
168.97
Extra rate for Third Floor
76.73
-
253.45
Extra rate for Fourth Floor
16.35
-
337.94
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure. Total Ground Floor + First Floor + Second Floor + Third Floor
941.09
-
552.91
Extra rate for First Floor
240.69
-
6.08
Extra rate for Second Floor
243.36
-
12.15
Extra rate for Third Floor
213.68
-
18.23
12.5mm thick cement plaster 1:5.
2140.27
-
105.92
20 mm thick cement plaster 1:5.
2140.27
-
143.43
12.5 mm thick cement plaster 1:4.
890.92
-
116.29
20mm thick cement plaster 1:4 in two coat work.
890.92
-
157.72
Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)
131.06
-
239.91
Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
11
-
140.15
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
70
-
137.79
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
70
-
164.5
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
11
-
76.85
Khurra on roof as per item No. 13.45 with CI Spouts 100 mm dia fixed in position.
4
-
109.94
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
11
-
76
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
11
-
551.77
Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement
519.32
-
553.41
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
114.07
-
51.63
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers incluidng ramming, watering and consolidated all lead .
308.66
-
272.16
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
418.24
-
322.31
Extra for using 1:3:6 instead off 1:8:16
42.43
-
894.55
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (Using mechanical mixer for mixing of material). Total First Floor + Second Floor + Third Floor + Fourth Floor
1168.89
-
129.98
Extra rate for First Floor
394.55
-
2.6
Extra rate for Second Floor
394.55
-
5.2
Extra rate for Third Floor
359.44
-
7.8
Extra rate for Fourt Floor
20.35
-
10.4
Extra for using 1:3:6 instead off 1:8:16
5.49
-
894.55
Kota stone tile flooring 20mm to 30 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing.Total Ground Floor + First Floor + Second Floor + Third Floor + Fourth Floor
592.92
-
1285.41
Extra for First Floor
143.65
-
2.7
Extra for Second Floor
143.65
-
5.4
Extra for Third Floor
143.65
-
8.1
Extra for Fourth Floor
18.32
-
10.8
Kotah stone tile 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 Cement and 3 Sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. Total Ground Floor + First Floor + Second Floor +Third Floor
58.57
-
1317.08
Extra for First Floor
14.18
-
2.7
Extra for Second Floor
14.02
-
5.4
Extra for Third Floor
14.18
-
8.1
Extra for Fourth Floor
1.96
-
10.8
Baroda green marble flooring 15mm to 20mm thick over 12.5mm thick base of Cement mortar 1:3 laid and jointed with white cement slurry with pigment to match the shade of marble including rubbing & Polishing.
Tiles Size 45 cm x 60 cm & aboveTotal Ground Floor + First Floor + Second Floor +Third Floor
75.68
-
2043.97
Extra for First Floor
18.92
-
2.7
Extra for Second Floor
18.92
-
5.4
Extra for Third Floor
18.92
-
8.1
Black granite stone tiles 20mm thick in skirting risers of steps dado, walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement and 3 course of sand) and joint with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing, dowels, pins and cramps. Total Ground Floor + First Floor + Second Floor +Third Floor
30.24
-
4422.73
Extra for First Floor
7.56
-
2.7
Extra for Second Floor
7.56
-
5.4
Extra for Third Floor
7.56
-
8.1
Extra labour for projected nosing of stair case of any shape and design
126.18
-
36.84
Providing and fixing Morwad marble strip 18mm to 20mm thick and 100mm wide in Kotah Stone Flooring over 12.50 mm thick base of cement mortar 1:3 jointed with cement slurry including cost of aditional mortar equivallent to the kotah stone thickness and colouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.
649.06
-
133.82
Precast chequered tiles of 20mm thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps on landings. Ground Floor
7.52
-
504.52
Providing and laying 60mm thick cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish by strong vibratory process or with vibrohydroic compactrors machine 64 vibro-hydrolic campaction machine of approved size and design / shape laid in ordinary Grey Colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer in Charge for Light Traffic Areas such as Pedestrain plazas, shopping complexes, ramps, car parks, office driveway, housing colonies, office complexes, rural roads with low volume traffic, farm houses, beach sites, tourist resorts, local authority footways, residential roads etc.Ground Floor
17.28
-
640.32
Providing and laying vitrified floor tiles of Size 600 x 600 mm in different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Design is homogenous throughout the tile body). Total Ground Floor + First Floor + Second Floor + Third Floor
913.79
-
1579.58
Extra for First Floor
237.33
-
2.7
Extra for Second Floor
237.33
-
5.4
Extra for Third Floor
201.8
-
8.1
Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
47.55
-
3633.22
Providing & fixing 16 gauge stainless steel pipe of various sizes railing of grade 304 duly fixed on side wall with the help of bolts fixed with hand rail, S.S square bar 25 x 25mm welded to S.S flat 50 x 5mm complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing along wall in Ramp for upper storey Design as per guidelines issued for persons with disability)
58.52
-
2704
Cement Concrete 1:2:4 with stone ballast or shingle.using concrete mixing volumetric type Total Ground Floor + First Floor + Second Floor + Third Floor
6.59
-
4012.3
Extra for First Floor
1.71
-
2.4
Extra for Second Floor
1.71
-
4.8
Extra for Third Floor
1.46
-
7.2
Supplying and fixing of Pressed steel sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiveing tower bolts and finished with 2 coats of ready mixed painted lead non setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.
925.74
-
376.5
Cup board frame of size 75mmx45mm with 25mm wide single rebate
930.47
-
326.09
Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
1145.92
-
439.09
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973,
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-
35mm Thick
208.21
-
2930.42
20mm Thick
345.82
-
1736.94
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
744.65
-
150.3
Providing & fixing 1'-0" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
103
-
395.04
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
93.01
-
8480.73
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area.
397.29
-
600.38
Wire gauge Hollock wood door shutter without springs housed in chowkhat.
35mm thick
105.84
-
1657.15
Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.Panelled, glazed or glazed and panelled (Double leaf). 35mm thick
91.97
-
1889.06
Providing and fixing 25mm thick particle board
84.78
-
1655.09
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete Total Ground Floor + First Floor + Second Floor + Third Floor + Fourth Floor
892.76
-
5993.65
Extra rate for First Floor
166.72
-
12
Extra rate for Second Floor
166.72
-
24
Extra rate for Third Floor
161.05
-
36
Extra rate for Fourth Floor
8.95
-
48
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete.I.S.I Designation No. III (size of door 851mm to 1000mm)
61
-
1131.32
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : For fixed portion
61.47
-
339.17
For Openable portion
37.6
-
351.84
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on one side. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
1.88
-
905.28
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)With float glass panes of 5.5 mm thickness.
10.18
-
976.58
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge.
2
-
2252.24
Providing Polyster Powder coating 50 micron any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop .
99.07
-
50.81
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
7856.32
-
49.48
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.
6074.48
-
53.4
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
With ordinary quality Paint
288.02
-
16.26
Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work
With ordinary quality paint
288.02
-
45.23
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
1246.57
-
33.86
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
1444.38
-
19.49
Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
1444.38
-
49.48
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
1781.84
-
81.45
Curtain rod 25mm dia Aluminium pipe with brackets fixed in position including nails and screws etc. (Teak Wood)
228.59
-
149.92
Construction of Plinth protection complete as per drawing.
Earth work in exavation in foundations, trenches, etc. in all kinds of soil where pick jumper work is not involved and not exeeding 2.0 Mtr. depth and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 Mtr. complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
13.22
-
119.3
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
5.29
-
2293.23
115 mm thick brick wall laid in cement mortar 1 :4 without reinforcement in foundation and plinth complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
55.55
-
473.24
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
52.08
-
322.31
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
62.5
-
167.42
Floating coat of 1.5mm thick neat cement laid in one operation to the topping.
62.5
-
88.22
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
41.67
-
105.92
(A2) Construction of Check post
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
8.26
-
119.3
Cement concrete 1:5:10 with 40 mm gauge stone ballast. using concrete mixing volumetric type
1.75
-
2613.94
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
5.35
-
3519.43
Damp proof course 4 cm thick of cement concrete 1 : 2 : 4 with 2 coats of bitument 20/30 penetration at 1.65 kg per Sqm. laid hot and sanded.
1.62
-
284.66
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
6.52
-
3800.63
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture. Slab
1.91
-
5251.11
Door Lintel
0.18
-
5251.11
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Ground Floor
15.76
-
204.01
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Ground Floor
3.6
-
188.73
Plastering on underside of ceiling 10 mm thick cement plaster 1:4
6.32
-
102.76
12.5mm thick cement plaster 1:5.
10.59
-
105.92
20 mm thick cement plaster 1:5
10.59
-
143.43
12.5 mm thick cement plaster 1:4.
25.86
-
116.29
20 mm thick cement plaster 1:4.
25.86
-
157.72
Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)
2.82
-
239.91
Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
1
-
140.15
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
1
-
137.79
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
1
-
164.5
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
1
-
76.85
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
1
-
76
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
1
-
551.77
Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement. First Floor
11.76
-
553.41
Extra rate for First Floor
11.76
-
3.08
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
13.72
-
51.63
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers incluidng ramming, watering and consolidated all lead .
5.07
-
272.16
Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, lock-notch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete. Door and window frame of size 113mmx60mmx with 35mm wide single rebate
5.03
-
376.5
Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
19.73
-
439.09
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
7.68
-
322.31
Extra for using 1:3:6 instead off 1:8:16
0.78
-
894.55
Kota stone tile flooring 20mm to 30 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing.Ground Floor
7.1
-
1285.41
Kotah stone tile 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 Cement and 3 Sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishingGround Floor
3.74
-
1317.08
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35 mm thick
1.88
-
2930.42
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
1.88
-
150.3
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
300mm x 16mm
1
-
126.56
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area.
3.95
-
600.38
Extra for providing & fixing Steel Tube beading size 12mm x 12mm, 18 guage of approved shape and section with screw for fixing of glass panes in stead of glazing clips and metal slash putty in steel doors, windows & Ventilators complete in all respect
25.91
-
45.79
Wire gauge Hollock wood door shutter without springs housed in chowkhat.
35mm thick
3.95
-
1657.15
Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.Panelled, glazed or glazed and panelled (Double leaf). 35mm thick
3.95
-
1889.06
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
0.64
-
8480.73
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. Ground Floor
2.04
-
5993.65
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
4.23
-
33.86
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
12.13
-
19.49
Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
12.13
-
49.48
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
79.22
-
49.48
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.
27.5
-
53.4
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
With ordinary quality Paint
3.95
-
16.26
Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work With ordinary quality paint
3.95
-
45.23
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
51.72
-
81.45
Construction of Plinth protection complete as per drawing.
Earth work in exavation in foundations, trenches, etc. in all kinds of soil where pick jumper work is not involved and not exeeding 2.0 Mtr. depth and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 Mtr. complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
1.56
-
119.3
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
0.62
-
2293.23
115 mm thick brick wall laid in cement mortar 1 :4 without reinforcement in foundation and plinth complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
6.55
-
473.24
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
6.14
-
322.31
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
7.37
-
167.42
Floating coat of 1.5mm thick neat cement laid in one operation to the topping.
7.37
-
88.22
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
4.91
-
105.92
(B1) Outer infrastructure Construction of Parking , Pavement Earth filling with good quality earth obtained from out side including compensation of earth, loading, unloading, carriage from outside the peremises to site of work, spreading, laying watering compacting with road roller complete as per specifications.
91.49
-
272.16
Cement Concrete 1:4:8 with stone ballast of size using mechanical mixer
59.67
-
2841.91
Providing and laying 60mm thick cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish by strong vibratory process or with vibrohydroic compactrors machine 64 vibro-hydrolic campaction machine of approved size and design / shape laid in ordinary Grey Colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer in Charge for Light Traffic Areas such as Pedestrain plazas, shopping complexes, ramps, car parks, office driveway, housing colonies, office complexes, rural roads with low volume traffic, farm houses, beach sites, tourist resorts, local authority footways, residential roads etc.
318.24
-
640.32
Providing and laying 60mm thick cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish by strong vibratory process or with vibro-hydraulic compactor machine or with vibro-hydrolic campaction machine of approved size and design / shape laid in Dark fast Colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer in Charge for Light Traffic Areas such as Pedestrain plazas, shopping complexes, ramps, car parks, office driveway, housing colonies, office complexes, rural roads with low volume traffic, farm houses, beach sites, tourist resorts, local authority footways, residential roads etc.
79.56
-
667.93
Construction of footpath with Interlocking pavers, Kerb & Channels
Plain cement concrete M-20 grade precast kerb 250mm high with bottom width 165mm and top width 115mm fixed in position including carriage to site of work complete as per technical clause 408 of MORT&H specifications
76.5
-
337.07
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
52.47
-
322.31
Providing and laying 50mm thick cement concrete interlocking paver block of M-30 grade machine made with rubber moulded smooth finish by strong vibratory process or with vibro-hydrolic campaction machine of approved size and design / shape laid in ordinary Grey Colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer in Charge for Light Traffic Areas such as Pedestrain plazas, shopping complexes, ramps, car parks, office driveway, housing colonies, office complexes, rural roads with low volume traffic, farm houses, beach sites, tourist resorts, local authority footways, residential roads etc.
36.73
-
572.88
Providing and laying 50mm thick factory made cement concrete interlocking paver block of M-30 grade rubber moulded smooth finish by strong vibratory process or with vibro-hydrolic campaction machine of approved size and design / shape laid in Dark fast Colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer in Charge for Light Traffic Areas such as Pedestrain plazas, shopping complexes, ramps, car parks, office driveway, housing colonies, office complexes, rural roads with low volume traffic, farm houses, beach sites, tourist resorts, local authority footways, residential roads etc.
15.74
-
612.43
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior sufrace
34.43
-
20.81
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. With special quality paint
34.43
-
58.08
(B2) Construction of Boundary Wall on Front & Left Side & Raising of Back Side
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
111.09
-
119.3
Cement concrete 1:5:10 with 40 mm gauge stone ballast. using concrete mixing volumetric type
22.22
-
2613.94
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
13.16
-
4845.81
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture. Columns (Ground Floor)
6.2
-
5251.11
Tie Beam (Ground Floor)
9.7
-
5251.11
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
50.79
-
158.31
Centring and shuttering for columns (Square or rectangular or poly gonal in plain)Column
61.76
-
242.01
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Beam
77.6
-
188.73
Extra for Smooth Surface of Column.
61.76
-
24.19
Extra for Smooth Surface of Beam
77.6
-
18.87
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.
31.05
-
3624.68
First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.
67.45
-
3905.88
20mm thick cement plaster 1:4 in two coat work.
357.29
-
157.72
Striking of Joints in Cement
312.38
-
52.26
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. Ground Floor
42.23
-
5993.65
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
496.65
-
49.48
Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
809.03
-
73.55
PROVIDING M.S. GATES Iron grated doors, including pintle hinges and arrangements.
12.26
-
11273.34
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
12.26
-
20.81
Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
12.26
-
58.35
Public Health Services
Sub Work-1 Internal Water Supply, Sewerage, Sanitation
Sub Head-1 Internal Sewerage System
Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge )including cutting, jointing, wastage, but excluding cost of lead jointing.
Type - B
110mm o/d SWR UPVC pipe line laid complete
129.84
-
362.5
75mm o/d SWR UPVC pipe line laid complete
138.98
-
271.5
Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm i/d pipes
Bend Plain
21
-
125
Cowls
4
-
32.5
Collars
25
-
93.5
Single junction with door
12
-
204
For 75mm i/d pipes
Bend Plain
4
-
73.5
Cowls
4
-
22.5
Collars
28
-
61.5
Single junction with door
12
-
122.5
With 75mm i/d outlet shallow seal at First Floor
53
-
192
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 110mm i/d SWRUPVC pipes
12
-
164.5
M.S. Holder bats clamps for 90mm i/d SWRUPVC pipes
12
-
147.5
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
100mm internal Diametre HCI gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
7
-
2413.5
Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
5
-
4106.9
Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete. uPVC Pipe 6 Kgf/cm2
50mm i/d
7.31
-
163
Sub Head-2 Internal Water Supply System
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.
15mm i/d
24.38
-
175
20mm i/d
60.96
-
218
25mm i/d
121.91
-
289
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
qty same as GI P 15mm i/d to 25 mm
207.25
-
55.5
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
Through wall 11.43 cm thick
16
-
112.5
Through wall 22.86 cm thick
16
-
160.5
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. 15mm i/d G.I. Union
16
-
86.5
20mm i/d G.I. Union
16
-
145.5
25mm i/d G.I. Union
16
-
184.5
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
25mm i/d Brass Ball valves
18
-
528.5
Painting G.I. Pipes and Specials with synthetic enamel Paint in all shades as per I.S.I. specification on existing or new work, two coats paints including cleaning rubbing surface, etc. 15mm & 20mm i/d G.I. Pipe
85.34
-
4
25mm & 32mm i/d G.I. Pipe
121.91
-
5.5
Sub Head - 3 Sanitary Installation
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer in charge ) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer in charge.
17
-
3995.5
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
17
-
302
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
17
-
74.5
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect
Size 49 cm dia (above counter round)
16
-
4173.5
Size 550 mm x 400 mm
4
-
2900.5
Providing & fixing in position best Indian make PVC flexible tube connection.
PVC tube connection of size 15 mm x 375 mm with PTMT nut
17
-
101.5
Providing and fixing PVC waste pipe 32mm complete in all respect.
4
-
121
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
C.P. brass towel Rails size 15mm dia 600mm long
20
-
1363.5
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
C.P. brass Bib cock long nose/ long body without flange
32
-
1043
C.P Brass bib cock without flange
16
-
819
Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge). C.P.brass 15mm Angle valve
41
-
796
C.P.brass 15mm Concealed stop cock with flange
33
-
1185.5
Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
122
-
52
Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.
122
-
89.5
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
20
-
844
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
16
-
1192
Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. C.P. brass toilet paper holder
20
-
967.5
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
20
-
518
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Double Layer Tanks
17000
-
8
Providing and fixing in position automatic brass Ball Cock in tanks.
Brass Ball Cock with rod and Plastic Ball 25mm i/d
9
-
646
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 25mm i/d
9
-
169
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
9
-
2000
Sub Head-4 Flooring and Wall Tile
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling
Ground Floor
49.33
-
322.31
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping. Total Ground Floor + First Floor + Second Floor
147.99
-
129.98
Extra rate for First Floor
49.33
-
2.6
Extra rate for Second Floor
49.33
-
5.2
Extra rate for Third Floor
49.33
-
7.8
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material). (Under floor tiles) Total Ground Floor + First Floor + Second Floor
197.32
-
158.44
Extra rate for First Floor
49.33
-
2.6
Extra rate for Second Floor
49.33
-
5.2
Extra rate for Third Floor
49.33
-
7.8
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.Total Ground Floor + First Floor + Second Floor
221.64
-
259.65
Extra rate for First Floor
55.41
-
2.6
Extra rate for Second Floor
55.41
-
5.2
Extra rate for Third Floor
55.41
-
7.8
Anti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with white cement slurry in joints including corners angles and beading. Total Ground Floor + First Floor + Second Floor + Third Floor
197.32
-
976.23
Extra Rate for First Floor
49.33
-
2.7
Extra Rate for Second Floor
49.33
-
5.4
Extra Rate for Third Floor
49.33
-
8.1
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 300 x 300mm mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.Total Ground Floor + First Floor + Second Floor + Third Floor
579.58
-
733.1
Extra Rate for First Floor
141.72
-
2.66
Extra rate for Second Floor
141.72
-
5.32
Extra rate for Third Floor
141.72
-
7.98
Black Granite Stone tiles 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.Total Ground Floor + First Floor + Second Floor + Third Floor
18.4
-
4422.73
Extra Rate for First Floor
4.6
-
2.66
Extra rate for Second Floor
4.6
-
5.32
Extra rate for Third Floor
4.6
-
7.98
Supplying and filling cinder on roof (1st Storey) including light ramming. Total Ground Floor + First Floor + Second Floor
113.69
-
714.35
Extra rate for First Floor
15.03
-
2.5
Extra rate for Second Floor
49.33
-
5
Extra rate for Third Floor
49.33
-
7.5
Sub Head -5 Water Coller & Air Conditioning
Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 60 120 G, cooling capacity Ltrs/hr. 60, storage type capacity 120 Ltrs. Including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA/ Voltas – or its equivalent.
1
-
39435
Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 40 80 G, cooling capacity Ltrs/hr. 40, storage type capacity 80 Ltrs. including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA / Blue Star / Bajaj – or its equivalent.
3
-
31210
Supply & Erection of automatic voltage stabilizer for storage type water cooler, Wall mounted, Heavy duty, copper wounded with volt meter etc. along with 3 core cord of suitable length and 3 pin power shoe including erection, connection & testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make... V – Guard or its equivalent.
4
-
2997
Supply & installation of Ultra Violet Filter and Censor system, capacity 120 ltr. Per hour, 100% chemical free, including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make... Aquasure – or its equivalent.
4
-
10501
Sub Work-2
Estate Water Supply Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. For 80mm pipe line
73.61
-
57.5
Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage.
D.I. Pipe as per IS 8329 DI-K9
80mm i/d pipe lines laid complete
111.53
-
889.5
Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.
102
-
97.5
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).
Class PN-1 as per ISI. 80mm i/d Sluice Valves flanged
2
-
4178.5
Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.
2
-
4818
Providing & fixing C.I indicating plates of size 100mm x 100mm for SV/FH including synthetic enammel paint & letters in white enamel paint , fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including concrete block complete in all respect as directed by Enginner-in-Charge.
2
-
191
Providing, fixing and jointing Cast Iron surface box for Sluice valve, Air valve, Fire hydrant etc. including all carriages complete.
6
-
67
Sub Work-3
Estate Sewerage Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
110 mm i/d pipes
42
-
298.6
160 mm i/d pipes
30
-
636.4
200mm i/d pipe
108.15
-
998.2
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
For depths not exceeding 3.0 metre B.G.L.
For all classes of soil except rocky
74.74
-
65.55
For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L.
For all classes of soil except rocky
181.47
-
66.43
Cement concrete 1:6:12 with brick ballast 40mm gauge using concrete mixer.
11.66
-
2470.11
Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 63.464 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.
Inside size75x120cm and 120 cm deep
6
-
12175.4
Extra for making connections of all sizes newly laid sewers within benching of fully charged sewers including pluging of sewer, dewatering & desilting of manholes etc. complete in all respects.
1
-
1028.4
Sub Work-4
Fire Fighting Arrangements Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
4.5kg capacity
8
-
6735.5
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
6kg Capacity
8
-
2742
(D1) ELECTRICAL SERVICES
Providing Internal Electrical Installations RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, PVC, fire retardant conduit pipe 20mm/25mm dia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp./16/20Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches/sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) PVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-
Make :- PVC Insulated copper wire:-Finolex,, Polycab, RR Kabel, Havells,
PVC Conduit Pipe Make:- Diplast/ Canon/ AKG/ Poly India/ Polycab/ Ravindra/ Supreme Accessories:-North-West(Nova), Havell's (Crab Tree), Legrand (Myrius)
Wiring fan point with sheet metal fan box (shape hexagonal) in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts.
118
-
982.59
Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.
263
-
508.92
Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade.
157
-
501.66
Wiring 3 Pin 6 Amp. Plug control comprising wall socket (shuttered) and switch including bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.
57
-
340.28
Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.
21
-
399.97
Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with double control switches.
4
-
788.25
Wiring TV sockets and Telephone socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules, for having TV sockets, Telephone sockets RJ11 & RJ45 (one module) etc., and covered with Frame Plate etc., & including the cost of required number of modular TV sockets, Telephone sockets RJ11 & RJ45 (one module) and other petty material etc. including the cost of cutting and filling up of chases:-Wiring Telephone socket point RJ11 (one module)
1
-
231.75
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications 2010:-
Make:- Diplast/ Canon/ AKG/ Poly India/ Polycab/ Ravindra/ Supreme
Heavy gauge PVC conduit pipe 20mm dia. (ISI marked) Flushed
5
-
33.9
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
310
-
40.9
Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed
180
-
77.47
PVC flexible pipe 25mm dia.
2
-
12.09
PVC flexible pipe 40mm dia.
50
-
23.29
PVC INSULATED SINGLE CORE FRCOPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated single core FRcopper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing. Make:-Finolex,, /Polycab/ RR Kabel/ Havell's PVC insulated copper conductor single core FRcable (ISI marked) overall 1.5 sq.mm, 1100volts grade
305
-
15.11
PVC insulated copper conductor single core FRcable (ISI marked) overall 2.5 sq.mm, 1100volts grade
610
-
21.61
PVC insulated copper conductor single core FRcable (ISI marked) overall 16 sq.mm, 1100volts grade
200
-
112.83
PVC insulated copper conductor single core FRcable (ISI marked) overall 10 sq.mm, 1100volts grade
325
-
73.27
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of pipe for wiring purposes including bends, inspection boxes etc., where necessary including painting as per PWD General Specifications (Electrical Works):-Supply and erection of 20mm dia. heavy gauge welded conduit pipe (1.60mm thick) suspension rod for ceiling fan complete in all respect as desired by the Engineer-in-charge.
118
-
85.03
MOULDED CASE CIRCUIT BREAKERS:
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicle type) in the existing Cubical Panel (conforms to IEC:60947-II) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD General Specifications (Electrical Works) complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with sutiable size of Thimbles etc.
MCCB (Fixed Type Thermal and Magnetic Protection Make: L&T, ABB (T-MAX), Schneider (CVS), Seimens(3VT1/3VL)):40-80amp. 415 volts breaking capacity ≥25kA four pole fixed type thermal and magnetic setting MCCB unit
2
-
5334.2
G.I. EARTHING:
Earthing of Sheet metal/ iron clad Switches and metallic cases etc., with No. 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe partly recessed and partly on surface complete with 135cm long 50mm dia. G.I. earth pipe with G.I. reducing socket (50mm x 15mm) including erection of the same, 10 metre below ground level with necessary charcoal & salt mixture etc., up to 13 metre in length (including boring & refilling).
1
-
3357.9
BONDING TO EARTH WITH G.I. WIRE:
Bonding to earth with G.I. wire No. 8S.W.G. (4mm dia) in 20mm dia. heavy gauge (1.6 mm thick) welded conduit pipe (flushed).
5
-
97.21
COPPER EARTHING:
Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 20 mm x 3 mm thick electrolytic copper tape rivetted (with 10 nos. copper rivets) to 30 cm x 120 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper tape on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.
2
-
14481.34
BONDING TO EARTH WITH G.I. WIRE:
Supply and Erection of 20mm x 3mm thick copper tape (As additional length).
10
-
343.54
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles and bonding to existing earth etc.
GROUP-A: (Siemens (Beta Guard/Minigard), Legrand (Ekinoxe) & Schneider (Neo Break), L&T (EXORA), HAGERSheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's, 4 way each
1
-
935.54
Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 6 way each
8
-
3065.35
Supply and erection of Sheet metal double door T.P & N (Vertical Design) 4 way distribution board (dust protected) provided with bus bar neutral link and din bar, suitable for incorporating MCCB for incoming and SP & TP MCB's for outgoing (Make siemens/ Beeta/Gauard/Minigard, Legrand (Ekinoxe) & Schneider (Neo Break, L&T (Higher Vision+) complete in all respects as approved and desired by the engineer in charge at site. GROUP-B: (Havell's, HPL, ABB, Standard & other brands approved by PWD)
2
-
5692.19
MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:
Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs. GROUP-A: (Siemens (Beta Guard), Legrand (Lexic) & Schneider (Neo Break), L&T (Exora,Hager)
Miniature circuit breaker double pole 6-32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
1
-
514.64
Miniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
146
-
173.26
Miniature circuit breaker triple pole 40amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
4
-
1081.17
Miniature circuit breaker four pole 40amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
8
-
1468.88
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size.
Make :-Duraline/ EMtel/ REX
Double walled corrugated (DWC) HDPE pipe 50/38 mm (outer/ inner dia.)
20
-
86.01
Double walled corrugated (DWC) HDPE pipe 120/103.5mm (outer/ inner dia.)
350
-
168.82
Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaquar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Wipro / Halonix including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site.
231
-
521
S/E of Energy Saving Fan Ceiling Fans 1200mm sweep ( 48" ) having two ball bearing but without regulator including flexible wire & petty material etc. for connections complete with erection, connections and testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make :- Crompton Entrust 50-5Star or its equillant make Havell's ES-50 Premium 5Star /Orient.
118
-
1696
Supply and erection of Plastic Ventialtion Fan Ventilus 10" (250mm-900RPM) Single Phase of make Crompton , White Colour / Make Havell's Ventil Air-DX White including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site
1
-
1480
Supply and erection of 12" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single Phase of make Crompton Model EXHD 300-6-1 or Its equialant Make Havell's Turbo Force SP / GE ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site
8
-
2834
Supply and erection of Wall fan of 400mm sweep (16") High Speed. Make Crompton WM Fizzair Opel White or Its equilant make Havell's / Orient ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and Aluminium louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site.
1
-
1994
XLPE/ PVC INSULATED ARMOURED CABLES (LOOSE):
Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specifications (Electrical Works):-
Make :- Polycab, Havells/ Finolex / RR Kable
Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 150sq.mm (3 ½ Core)
350
-
840.9
Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 6sq.mm (2 Core)
20
-
89.82
SUPPLY AND ERECTION OF WIRING ACCESSORIES:
Supply and erection of switches, sockets, power switch and sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including connections and petty material etc. Bakelite batten holder large size
20
-
27.86
Supply and Erection of LED Lamp 9w including erection with the existing batten holder etc complete in all respets as approved by the engineer in charge at site Make :- Philips / Wipro / Halonix
1
-
150
Supply and Erection of LED Lamp 12w including erection with the existing batten holder etc complete in all respets as approved by the engineer in charge at site Make :- Philips / Wipro / Halonix
18
-
200
Supply, Erection, Testing & commissioning of indoor LT panel (Modular construction bolted type) of suitable size having minimum depth 300mm / wide 300mm for busbar at the front of the panel. Panel shell be made from 14 / 16SWG CRCA sheet, conforming to IS 8623/1977-82 IEC 60439. The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase wire & earth system, the panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The panel will be fabricated using CRCA sheet structure with totally enclosed enclosure (Each compartment of switch is totally enclosed from each side). The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (8 tank prosess Powder coated) after necessary putty work the panel will be provided with doors having hinges and half turn locks only. The panel shall be provided with TPN Busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity AluminiumAll Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only (electric grade with Tin coating). The panel shall complete with also have digital metering unit with selector switch (volt meter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & led type indicator, cable termination & cable glands, nuts & bolts & other patty material etc. Detail of material to be installed in the cubical panel with the following switch gears. Manufacturer of Panel should be CPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO standerd) The Concerened contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site of size (1700mm wide x 1375 Height x 300mm Deep) Panel Manufacturer Make:- ETE Electrogears ./Kalyani Switch Gear / AMCO
Incomers:-
■160Amp.415volts ≥35 FP MCCB Unit with Adjustable Thermal and Magnetic Protection =2Nos.
MCCB (Adjustable Thermal & Magnetic Protection Make: L&T (DSINE), ABB (T-MAX), Schneider (NSX), Seimens(3VT1/3VL)):
Outgoings:-
■40-80Amp.415volts ≥50 FP MCCB Unit with Fixed Type Thermal and Magnetic Protection =4Nos.
MCCB Fixed type Make :- L&T Du/DH), ABB (T-MAX),( Schneider CVS) ■COS 160amp 415v TP & N =1Nos. ■ All Incomers & Out going With Extendable Rotary Handle with adjustabledepth
1
-
96398
(D2) Providing Campus Lighting/ Security Lighting GI PIPE POLES
Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. conforming to I.S. 1239 part-I 1979, including fixing up to a given depth below G/L, the hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below and above G/L with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thick ness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a MCB distribution board SPN 4way with hinged water tight cover with locking arrangement having one single pole MCB of required capacity of the same size the outer surface of the plinth to be finished with 1:2 cement plaster 6 mm thick M.S. fuse box shall have a water proof hinged cover with locking arrangement including painting of pole with two coats of approved aluminium paint as required:-6.1 metre long having nominal bore dia. 80mm, planting depth 120cm with pit depth 135cm.
9
-
4987.93
SINGLE ARM BRACKETS:
Supply and erection of G.I. pipe 40mm dia. (A-class) single arm bracket atleast 1 metre long arm to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the top of the GI pipe pole having top outer dia. 80mm with GI reducer 80mm x 40mm with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site.
9
-
669.92
Supply & Erection of LED Street Light 45w in aluminium pressure Die Cast housing with touched glass cover (IP 66 protection ) of Make Jaquar Item Code LSRT0IS045XC or its equilant make and Cat Philips / Wipro/ Halonix including erection of the same with the existing bracket fixed with pole, connections and testing etc. complete in all respects as aproved by the Engineer in charge at site.
9
-
3695
Supply, erection ,testing ,commssioniong of LED POst Top Lantern Fitting 40 watt with IP 65having made of aluminium die cast base top fitted with LED's are Directly inbuilt extracted aluminium heat sinks. It has UV stablished injection moulded poly carbonate Diffuser for Glare face light Output, of Bajaj Make Cat No. BGCT 40W or its equivalent make and cat of Philips / Wipro / Halonix including erection of the same with existing poles / Gate Pillers, connections, and testing etc complete in all respect as approved engineer in charge at site
2
-
5800
XLPE/ PVC INSULATED ARMOURED CABLES (LOOSE):
Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specifications (Electrical Works):- Make :-Havell's / Polycab. / RRKable/ Finolex .
Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 16sq.mm (4 Core)
25
-
154.05
Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 16sq.mm (Twin Core)
200
-
110.86
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size. Make :- REX/ Duraline / Amtel
Double walled corrugated (DWC) HDPE pipe63/51mm (outer/ inner dia.)
200
-
104.04
G.I. EARTHING:Earthing of Sheet metal/ iron clad Switches and metallic cases etc., with No. 7/14 S.W.G. (7/2.18mm dia.) G.I. wire in 20mm dia G.I. pipe partly recessed and partly on surface complete with 135cm long 50mm dia. G.I. earth pipe with G.I. reducing socket (50mm x 20mm) including erection of the same, 10 metre below ground level with necessary charcoal & salt mixture etc., up to 13 metre in length (including boring & refilling).
2
-
3702.67
Supply and Erection of earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire No. 8SWG. The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The road shall be grouted upto complete length vertically. GI Earth rod 20 mm dia. 3 mtr. Long
9
-
664.02
PVC INSULATED SINGLE CORE FRCOPPER CONDUCTOR CABLE: Make:- Finolex / Polycab/ RRkable Havell'sSupply and erection of PVC insulated single core FRcopper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing.PVC insulated copper conductor single core FRcable (ISI marked) overall 1.5 sq.mm, 1100volts grade
150
-
15.11
SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT MISCELLANEOUS ITEMS:
S/E of SMCpedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4" hinges & locking system with heavy duty 12" sliding door.Placed on MS strip of size 12.5mmx2.5mm thick welded with MS sheet with 4no. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs.Front door welded x-actionally with MS flat 25mmx5mm.The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high.And pedestial with 4 Nos supporting members each of MS flat 50mmx6mm thick acc. to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint &bonding to the existing earth to be erected in the 1:2:4 CC, the platform of 150mm high from ground level & 450mm thick & 150mm from the top of the CCplatform as per Drawing attached.Cubical Size 1200mm high, 900mm wide and 350mm deep
1
-
9951.6
Supply and erection of Switch Disconnector fuse unit with HRC Fuses in sheet enclosure on the existing surface (conforms to IS 13947 (PartI&III) complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connection on both sides of switch with sutiable size of Thimbles, including cost of HRC fuses as per PWD General Specifications (Electrical Works).32Amp. 415volts three pole & neutral switch disconnector fuse unit with HRC Fuses in sheet enclosure
1
-
2223.66
Supply and erection of sheet metal bus-bar chamber (factory fabricated) duly powder coated on existing surface with required no. of bus-bar strips of suitable length and cross-sectional area. Copper strips of suitable length and cross-sectional area should be tinned and mounted on DMC/ SMC moulds at sufficient distance enclosure made of M.S. sheet 1.6mm thick with hinged cover and lock, fitted with dust excluding gaskets and secured with sufficient no. of cadmium plated iron screws and of given overall dimensions and to be fixed with G.I. bolts and nuts/ rag bolts and nuts etc. complete with all accessories including connections with suitable size of thimbles, bonding to the existing earth and painting etc. as desired by the Engineer-in-charge at site. Sheet metal bus bar chamber suitable for 63amp. 415 volts capacity with 4 tinned copper strip bus bars each of length 270mm and cross sectional area (18mm x 3.3mm) enclosure having over all dimensions (350mm x 450mm x 150mm) nominal
1
-
3465.38
SHEET METAL IRON CLAD SWITCHES:
Supply and erection of sheet metal iron clad switch on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications (Electrical Works).Sheet metal iron clad double pole switch 32amp. 415 volts
3
-
1129.24
Supply and erection of LED flood light 90w with high pressure die cast housing (IP 65 Protected) of Make Jaquar item code LFLD02SO 90XC or its equivallent make & Cat Phillips / Wipro / Halonix. The fitting will be mounting with the help of necessary arrangement for installation on the top parapet of the building including connections, testing & commissioning etc. complete in all respects as per satisfaction and desired by the Engineer-in-charge at site.
4
-
8476
XLPE/ PVC INSULATED UN-ARMOURED CABLES (ON SURFACE):
Supply and laying of XLPE/ P.V.C. insulated P.V.C. sheathed aluminium conductor un-armoured cable working voltage upto and including 1100 volts grade (on surface ) as per PWD General Specifications (Electrical Works):-
Make:- Finolex / Polycab/ RRkable Havell's. XLPE/ PVC insulated PVC sheathed aluminium conductor unarmoured cable working voltage 1100volts grade 10sq.mm (4 Core)
125
-
133.11
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements