Baba Farid University Of Health Sciences Tender

Supply & laying of Aluminium conductor XLPE/ P.V.C. insulated PVC sheathed armoured and served cable to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & bricks and back filling the trench etc., of the required size as per PWD General Specifications working voltage 1100volts grade 16sq.mm (Twin Core)

Supply & laying of Aluminium conductor XLPE/ P.V.C. insulated PVC sheathed armoured and served cable to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & bricks and back filling the trench etc., of the required size as per PWD General Specifications working voltage 1100volts grade 10sq.mm (Twin Core) (340+40)

Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specidications working voltage 1100volts grade 25sq.mm (3 ½ Core) (40+80)

Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specidications working voltage 1100volts grade 16sq.mm (Twin Core) (16+50)

Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specidications working voltage 1100volts grade 10sq.mm (Twin Core) (145+74+8)

Supply and erection of sheet metal iron clad switch on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications 2010. Sheet metal iron clad triple pole switch with neutral link 63 amp., 415volts

PAINTING INCLUDING LABOUR AND MATERIAL Painting of steel tubular pole with brackets with two coats of aluminium paint (with brush). 7 metre overall length (20+29+21)

Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. conforming to I.S. 1239 part-I 1979, including fixing up to a given depth below G/L, the hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below and above G/L with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thick ness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a MCB distribution board SPN 4way with hinged water tight cover with locking arrangement having one single pole MCB of required capacity of the same size the outer surface of the plinth to be finished with 1:2 cement plaster 6 mm thick M.S. fuse box shall have a water proof hinged cover with locking arrangement including painting of pole with two coats of approved aluminium paint as required:- 6.1 metre long having nominal bore dia. 80mm, planting depth 120cm with pit depth 135cm

Supply and erection of G.I. pipe 40mm dia. (A-class) single arm bracket atleast 1 metre long arm to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the top of the GI pipe pole having top outer dia. 80mm with GI reducer 80mm x 40mm with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site. 34.29 B I

Supply & erection of LED Street Light 30 Watt Make Bajaj/ Crompton/ Havells , 110 to 120 Lumens Per Watt. CCT 5700+/-300K, CRI 80, Beam Angle 102Deg x 52 Deg, Power Factor 0.95, THD 10%, Built-in- Surge Protection 4 kV, Epoxy Powder Coated Pressure die-cast Aluminium Housing. Whether Proof gaskets provided with LEDs and Control Gear Compartments. Drive specially designed to have built in surge voltage, open/short circuit protections. Protection IP66, Mechanical Impact Protection IK08 Cat No. ENXT P36L WH CR PC SD complete in all respect. with 2 year warranty (24+46+21)

Hand boring Horizontally for crossing or pipe under road or any other obstacle by using Aoger/Bocki method. Including excavation stringing and jointing of pipe 28.71

Providing, Stringing out P.V.C. Pipes ISI Marked (Premium make such as supreme / finolex / Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including cost of specials complete 63 mm o/d pipe of 4kgf/sqcm

Making of Cement Concrete muff of suitable size and length with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole sufficient to completely flush a SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirming to IS:14772, inner dimensions 250mm x 200mm x 100mm with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's). The SMC junction box is to be fixed with the pole by a MS flat clamp of size 20mm x 2mm thick. PVC pipe 40mm dia. (2No.x0.60m) should be provided for incoming and outgoing cables. The outer surface of the muff shall be finished with pure cement & two coats of white snowcem complete in all respect as approved and desired by the Engineer In-Charge at site Cement Concrete Muff of Overall Size 450mm dia., 80cm Long with making an extra collar (If pole installed in Centre verge/ Footpath) will be provided with 1:2:4 cement Sand & concrete mixture around the Steel tubular pole. The size of collar (height is 40cm & dia. is 45cm including pole dia i.e. 168.3mm)

Supply & erection of LED Flood Light 80 Watt, Make Bajaj/ Crompton/ Havells 110 Lumens Per Watt. CCT 5700+/-300K, CRI 70, Power Factor 0.95, THD 15%, Built-in- Surge Protection 5 kV with 10 kV External Impact Protection. Pressure die-cast Aluminium Housing to act as heat sink for efficient dissipation of heat. Electrochemically brightened and anodized aluminium reflector with modular lens. Heat Resistant toughened glass provided with gaskets and SS clips to ensure ingress protection. Drive specially designed to have built in surge voltage, open/short circuit protections. External Surge Protection Provided for additional safety. Protection IP66 Cat No. BJFL 80W LEDI, complete in all respect. with 2 year warranty

Supply and erection of Miniature circuit breaker four pole 50, 63amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply