Baba Farid University Of Health Sciences Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 2,30,200Document Cost
₹ 5,000Tender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_DMER_41404_1Bid Award Id
ViewTender No
BFUHS/370/2019Tender Authority
Baba Farid University Of Health Sciences ViewPurchaser Address
-Website
http://http://www.bfuhs.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Advertisement for tender for construction of NELS training center at IInd floor of skill center under GGSMCH Faridkot
tender for construction of NELS training center at IInd floor of skill center under GGSMCH Faridkot
price bid for tender for construction of NELS training center at IInd floor of skill center under GGSMCH Faridkot
BOQ Items
Disposal of Malba outside the premises loading / unloading including all leads as desired by Engineer in charge .
66.07
-
217.55
Washing concrete surface, scrubbing with brushes including preparing and laying slurry.
574.68
-
17.38
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.Total Second Floor + Third Floor
168.52
-
5251.11
Extra rate for Second Floor
159.48
-
81.6
Extra rate for Third Floor
9.04
-
122.4
Centring and shuttering for columns (Square or rectangular or poly gonal in plain) Total Second Floor + Third Floor
232.08
-
242.01
Extra for Second Floor
213.76
-
5.4
Extra for Third Floor
18.32
-
8.1
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Total Second Floor + Third Floor
692.44
-
204.01
Extra for Second Floor
655.81
-
5.4
Extra for Third Floor
36.63
-
8.1
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Total Second Floor + Third Floor
453.28
-
188.73
Extra for Second Floor
434.8
-
5.4
Extra for Third Floor
18.48
-
8.1
Plastering on underside of ceiling 10 mm thick cement plaster 1:4
554.03
-
102.76
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. Total Second Floor + Third Floor
114.06
-
3800.63
Extra rate for Second Floor
60.7
-
168.97
Extra rate for Third Floor
53.36
-
253.45
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure. Total Second Floor
446.18
-
552.91
Extra rate for Second Floor
446.18
-
12.15
12.5mm thick cement plaster 1:5.
636.8
-
105.92
20 mm thick cement plaster 1:5 .
636.8
-
143.43
12.5 mm thick cement plaster 1:4.
513.37
-
116.29
20mm thick cement plaster 1:4
513.37
-
157.72
Khurra on roof as per item No. 13.45 with CI Spouts 100 mm dia fixed in position.
2
-
109.94
Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)
61.49
-
239.91
Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
17
-
140.15
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
31
-
137.79
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
31
-
164.5
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
17
-
76.85
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
17
-
76
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
17
-
551.77
Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement
574.91
-
553.41
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
145.08
-
51.63
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (Using mechanical mixer for mixing of material). Total Second Floor + Third Floor
554.04
-
129.98
Extra rate for Second Floor
526.26
-
5.2
Extra rate for Third Floor
27.78
-
7.8
Extra for using 1:3:6 instead off 1:8:16
28.02
-
894.55
Kota stone tile flooring 20mm to 30 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing. Total Second Floor + Third Floor
250.76
-
1285.41
Extra for Second Floor
225.76
-
5.4
Extra for Third Floor
25
-
8.1
Kotah stone tile 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 Cement and 3 Sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. Total Second Floor +Third Floor
22.22
-
1317.08
Extra for Second Floor
19.9
-
5.4
Extra for Third Floor
2.32
-
8.1
Baroda green marble flooring 15mm to 20mm thick over 12.5mm thick base of Cement mortar 1:3 laid and jointed with white cement slurry with pigment to match the shade of marble including rubbing & Polishing.
Tiles Size 45 cm x 60 cm & above
43.2
-
2043.97
Extra for Second Floor
43.2
-
5.4
Black granite stone tiles 20mm thick in skirting risers of steps dado, walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement and 3 course of sand) and joint with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing, dowels, pins and cramps.
1.97
-
4422.73
Extra for Second Floor
1.97
-
5.4
Extra labour for projected nosing of stair case of any shape and design
70.1
-
36.84
Providing and fixing Morwad marble strip 18mm to 20mm thick and 100mm wide in Kotah Stone Flooring over 12.50 mm thick base of cement mortar 1:3 jointed with cement slurry including cost of aditional mortar equivallent to the kotah stone thickness and colouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.
274.51
-
133.82
Providing and laying vitrified floor tiles of Size 600 x 600 mm in different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Design is homogenous throughout the tile body).Second Floor
227.51
-
1579.58
Extra for Second Floor
227.51
-
5.4
Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
18.29
-
3633.22
Providing & fixing 16 gauge stainless steel pipe of various sizes railing of grade 304 duly fixed on side wall with the help of bolts fixed with hand rail, S.S square bar 25 x 25mm welded to S.S flat 50 x 5mm complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing along wall in Ramp for upper storey Design as per guidelines issued for persons with disability)
38.48
-
2790
Supplying and fixing of Pressed steel sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiveing tower bolts and finished with 2 coats of ready mixed painted lead non setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs completeDoors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.
135.17
-
376.5
Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
489.09
-
439.09
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973,
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (35mm thick)
49.54
-
2930.42
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
54
-
150.3
Providing and fixing CP sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
300mm x 16mm
21
-
126.56
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
31.17
-
8480.73
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area.
96.51
-
600.38
Wire gauge Hollock wood door shutter without springs housed in chowkhat.
35mm thick
84.48
-
1657.15
Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.Panelled, glazed or glazed and panelled (Double leaf). 35mm thick
83.78
-
1889.06
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position completeTotal Second Floor & Third Floor
246.18
-
5993.65
Extra rate for Second Floor
232.72
-
24
Extra rate for Third Floor
13.46
-
36
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separatelyFor fixed portion
69.46
-
339.17
For Openable portion
158.9
-
351.84
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on one side.
5.65
-
905.28
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) (With float glass panes of 5.5 mm thickness.)
10.24
-
976.58
Providing Polyster Powder coating 50 micron any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop .
228.36
-
50.81
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge.
6
-
2252.24
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
2300.32
-
49.48
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.
1827.62
-
53.4
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
With ordinary quality Paint
96.51
-
16.26
Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work
With ordinary quality paint
414.5
-
45.23
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
111.47
-
33.86
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
363.51
-
19.49
Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
474.98
-
49.48
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
1596.26
-
81.45
Safety arrangement around building for below floor,Extra scafolding for below storey for plaster and painting to above Second Floor Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to four story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
1074.11
-
176.05
Credit of Material to be received from dismentling
Tile from dismenling of tile terracing
12765
-
-3
Brick/Tile bats
9.19
-
-461.25
Construction of Ramp from First Floor to Second Floor including Roof slab at Second Floor Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture. Total of First Floor + Second Floor
49.04
-
5251.11
Extra rate forFirst Floor
21.45
-
40.8
Extra rate for Second Floor
27.59
-
81.6
Centring and shuttering for columns (Square or rectangular or poly gonal in plain) Total of First Floor + Second Floor
91.68
-
242.01
Extra rate for First Floor
45.84
-
2.7
Extra rate for Second Floor
45.84
-
5.4
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Total of First Floor + Second Floor
197.84
-
204.01
Extra rate for First Floor
98.92
-
2.7
Extra rate for Second Floor
98.92
-
5.4
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Total of First Floor + Second Floor
59.68
-
188.73
Extra rate for First Floor
29.84
-
2.7
Extra rate for Second Floor
29.84
-
5.4
Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or bartering including attached pillasters buttersses etc Total of Second Floor
79.82
-
269.06
Extra rate for Second Floor
79.82
-
5.4
Plastering on underside of ceiling 10 mm thick cement plaster 1:4
189.3
-
102.76
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (Using mechanical mixer for mixing of material). Second Floor
83.3
-
129.98
Extra rate for Second Floor
83.3
-
5.2
Extra for using 1:3:6 instead off 1:8:16
0.39
-
894.55
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. Third Floor
10.42
-
3800.63
Extra rate for Third Floor
79.82
-
253.45
Providing and Laying Out Door Precast Designer chequered tiles of size 300mm*300mm 20mm thickness in ordinary grey cement with chips and top layer of white cement mixed with pigment laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints with White Cement slurry containing pigment to match the shade complete in all respect.Second Floor
103.32
-
1018.33
Extra for Second Floor
103.32
-
5.4
Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement
90.92
-
553.41
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
49.95
-
51.63
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position completeTotal (First Floor + Second Floor)
62.55
-
5993.65
Extra rate for First Floor
28.51
-
12
Extra rate for Second Floor
34.04
-
24
12.5mm thick cement plaster 1:4.
119.03
-
116.29
20 mm thick cement plaster 1:4.
119.03
-
157.72
Providing & fixing 16 gauge stainless steel pipe of various sizes railing of grade 304 duly fixed on side wall with the help of bolts fixed with hand rail, S.S square bar 25 x 25mm welded to S.S flat 50 x 5mm complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing along wall in Ramp for upper storey Design as per guidelines issued for persons with disability)
146.3
-
2790
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
189.3
-
49.48
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.
189.3
-
49.84
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
238.05
-
81.45
Stripping and stacking slate or tiles of a roof.
130.25
-
27.56
Earth work excavation in ordinary soil, exclusive of compensation of earth :--
Earth work undressed with a combined lead upto 15 metres including breaking of clods.
13.21
-
71.59
Dismantling concrete or precast concrete. Reinforced Cement concrete
10.45
-
1364.98
Disposal of Malba outside the premises loading / unloading including all leads as desired by Engineer in charge .
23.66
-
217.55
Washing concrete surface, scrubbing with brushes including preparing and laying slurry.
130.25
-
17.38
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture. Total Second Floor + Third Floor
61.77
-
5251.11
Extra rate for Second Floor
61.77
-
81.6
Centring and shuttering for columns (Square or rectangular or poly gonal in plain) Total Second Floor
276.64
-
242.01
Extra for Second Floor
276.64
-
5.4
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Total Second
160.05
-
204.01
Extra for Second Floor
160.05
-
5.4
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Total Second Floor + Third Floor
62.32
-
188.73
Extra for Second Floor
62.32
-
5.4
Plastering on underside of ceiling 10 mm thick cement plaster 1:4
150.56
-
102.76
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.. Total Second Floor + Third Floor
14.87
-
3800.63
Extra rate for Second Floor
0.49
-
168.97
Extra rate for Third Floor
14.38
-
253.45
12.5mm thick cement plaster 1:5.
7.57
-
105.92
20 mm thick cement plaster 1:5
7.57
-
143.43
12.5 mm thick cement plaster 1:4.
89.63
-
116.29
20mm thick cement plaster 1:4
89.63
-
157.72
Khurra on roof as per item No. 13.45 with CI Spouts 100 mm dia fixed in position.
4
-
109.94
Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)
14.63
-
239.91
Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
4
-
140.15
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
7
-
137.79
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
7
-
164.5
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
4
-
76.85
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
4
-
76
Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement
130.25
-
553.41
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
72.16
-
51.63
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (Using mechanical mixer for mixing of material). Total Second Floor
150.56
-
129.98
Extra rate for Second Floor
150.56
-
5.2
Extra for using 1:3:6 instead off 1:8:16
7.61
-
894.55
Kota stone tile flooring 20mm to 30 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing. Total Second Floor
135.5
-
1285.41
Extra for Second Floor
135.5
-
5.4
Kotah stone tile 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 Cement and 3 Sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing Total Second Floor
2.13
-
1317.08
Extra for Second Floor
2.13
-
5.4
Providing and fixing Morwad marble strip 18mm to 20mm thick and 100mm wide in Kotah Stone Flooring over 12.50 mm thick base of cement mortar 1:3 jointed with cement slurry including cost of aditional mortar equivallent to the kotah stone thickness and colouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.
148.34
-
133.82
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
103.92
-
5993.65
Extra rate for Second Floor
103.92
-
24
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : For fixed portion
47.8
-
339.17
For Openable portion
97.1
-
351.84
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on one side.
1.88
-
905.28
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
7.83
-
976.58
Providing Polyster Powder coating 50 micron any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop .
144.9
-
50.81
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge.
2
-
2252.24
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
194.41
-
49.48
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.
165.7
-
53.4
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
179.27
-
81.45
Credit of Material to be received from dismentling
Tile from dismenling of tile terracing
2886
-
-3
Brick/Tile bats
2.08
-
-461.25
PUBLIC HEALTH SERVICES
Sub Work-1 Internal Water Supply, Sewerage, Sanitation
Sub Head-1 Internal Sewerage System
Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge )including cutting, jointing, wastage, but excluding cost of lead jointing.
Type - B110mm o/d SWR UPVC pipe line laid complete
131.67
-
362.5
75mm o/d SWR UPVC pipe line laid complete
121.91
-
271.5
Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm i/d pipes
Bend Plain
12
-
125
Cowls
6
-
32.5
Collars
18
-
93.5
Single junction with door
6
-
204
For 75mm i/d pipes
Bend Plain
11
-
73.5
Cowls
5
-
22.5
Collars
17
-
61.5
Single junction with door
7
-
122.5
With 75mm i/d outlet shallow seal at First Floor
12
-
192
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 110mm i/d SWRUPVC pipes
18
-
164.5
M.S. Holder bats clamps for 90mm i/d SWRUPVC pipes
15
-
147.5
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
100mm internal Diametre HCI gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
2
-
2413.5
Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
2
-
4106.9
Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.
UPVC Pipe 6 Kgf/cm2
50mm i/d
1.52
-
163
Sub Head-2 Internal Water Supply System
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.
15mm i/d
6.1
-
175
20mm i/d
15.24
-
218
25mm i/d
60.96
-
289
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm qty same as GI P 15mm i/d to 25 mm
82.3
-
55.5
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
Through wall 11.43 cm thick
4
-
112.5
Through wall 22.86 cm thick
4
-
160.5
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
15mm i/d G.I. Union
4
-
86.5
20mm i/d G.I. Union
4
-
145.5
25mm i/d G.I. Union
4
-
184.5
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
25mm i/d Brass Ball valves
8
-
528.5
Painting G.I. Pipes and Specials with synthetic enamel Paint in all shades as per I.S.I. specification on existing or new work, two coats paints including cleaning rubbing surface, etc.
15mm & 20mm i/d G.I. Pipe
21.34
-
4
25mm & 32mm i/d G.I. Pipe
60.96
-
5.5
Sub Head - 3 Sanitary Installation
Providing and fixing in position Chinaware Indian Orisa water closet size 580mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.
1
-
4183.5
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer in charge ) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer in charge.
5
-
3995.5
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
5
-
302
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
5
-
74.5
Providing and fixing in position vitreous Chinaware white large flat back or angular lipped front urinal 610 mm high of approved make (to the approval of the Engineer-in-charge) (610 mm x 410 mm x 380mm) consisting of C.P. waste 32 mm dia and C.P. brass spreader, complete.
3
-
5195
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect.
Size 49 cm dia (above counter round)
6
-
4173.5
Size 550 mm x 400 mm
1
-
2900.5
Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
6
-
1817.5
Providing and fixing in position best quality stainless steel sinks with complete fitting. Size 600 mm x 450 mm x 225 mm (Net size excluding flat edge)
1
-
8409.5
Providing & fixing in position best Indian make PVC flexible tube connection.
PVC tube connection of size 15 mm x 375 mm with PTMT nut
21
-
101.5
Providing and fixing PVC waste pipe 32mm complete in all respect.
8
-
121
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
C.P. brass towel Rails size 15mm dia 600mm long
1
-
1363.5
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
2
-
743
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
C.P. brass Bib cock long nose/ long body without flange
4
-
1043
C.P Brass bib cock without flange
6
-
819
Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge). C.P.brass 15mm Angle valve
20
-
796
C.P.brass 15mm Concealed stop cock with flange
5
-
1185.5
Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
35
-
52
Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.
35
-
89.5
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
7
-
844
Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.
C.P. brass toilet paper holder
6
-
967.5
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
2
-
518
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Double Layer Tanks
4500
-
8
Providing and fixing in position automatic brass Ball Cock in tanks.
Brass Ball Cock with rod and Plastic Ball 32mm i/d
1
-
1304
Brass Ball Cock with rod and Plastic Ball 25mm i/d
3
-
646
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 25mm i/d
8
-
169
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
4
-
2000
Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect.
25 litre capacity water heater
1
-
8551
Sub Head-4 Flooring and Wall Tile
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping. Second Floor
43.22
-
129.98
Extra rate for Second Floor
43.22
-
5.2
Extra for using 1:3:6 instead off 1:8:16
2.19
-
894.55
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material). (Under floor tiles)
Second Floor
43.22
-
167.42
Extra rate for Second Floor
43.22
-
5.2
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
43.22
-
259.65
Anti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with white cement slurry in joints including corners angles and beading. Second Floor
43.22
-
976.23
Extra Rate for Second Floor
43.22
-
5.4
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 300 x 300mm mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.Second Floor
82.85
-
733.1
Extra rate for Second Floor
82.85
-
5.32
Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
Second Floor
7.66
-
4855.93
Extra rate for Second Floor
7.66
-
5.32
Sub Head -5 Water Coller & Air Conditioning
Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 60 120 G, cooling capacity Ltrs/hr. 60, storage type capacity 120 Ltrs. Including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA/ Voltas – or its equivalent.
1
-
39531
Supply & Erection of automatic voltage stabilizer for storage type water cooler, Wall mounted, Heavy duty, copper wounded with volt meter etc. along with 3 core cord of suitable length and 3 pin power shoe including erection, connection & testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make... V – Guard or its equivalent.
1
-
3847
Supply & installation of Ultra Violet Filter and Censor system, capacity 120 ltr. Per hour, 100% chemical free, including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make... Aquasure – or its equivalent.
1
-
10986
Fire Fighting Arrangements Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
4.5kg capacity
3
-
6735.5
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
6kg Capacity
3
-
2742
Shifting of Water Supply
Shifting of water supply services from existing terrace to 2nd floor roof as per CSR Rate + Sanctioned Premium (As per actual quantity)
1
-
500000
ELECTRICAL SERVICES
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, PVC, fire retardant conduit pipe 20mm/25mm dia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp./16/20Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches/sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) PVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-
Make :- PVC Insulated copper wire:-Finolex,, RR Kabel, Havells, Accessories:-North-West(Nova), Havell's (Crab Tree), Legrand (Myrius), Hager
Wiring fan point with sheet metal fan box (shape hexagonal) in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts.
35
-
982.59
Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.
109
-
508.92
Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade.
23
-
501.66
Wiring 3 Pin 6 Amp. Plug control comprising wall socket (shuttered) and switch including bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.
15
-
340.28
Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.
13
-
399.97
Wiring call-bell point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with bell push and electronic buzzer 230 volts AC (including the cost of bell push, electronic buzzer & powder coated concealed metal box for electronic buzzer).
10
-
590.61
Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with double control switches.
2
-
788.25
Wiring TV sockets and Telephone socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules, for having TV sockets, Telephone sockets RJ11 & RJ45 (one module) etc., and covered with Frame Plate etc., & including the cost of required number of modular TV sockets, Telephone sockets RJ11 & RJ45 (one module) and other petty material etc. including the cost of cutting and filling up of chases:-
Wiring Telephone socket point RJ11 (one module)
10
-
231.75
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications 2010:-
Make:- Diplast/ Canon/ AKG/ Poly India/ Polycab/ Ravindra/ Supreme
Heavy gauge PVC conduit pipe 20mm dia. (ISI marked) Flushed
100
-
33.9
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
300
-
40.9
Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed
40
-
77.47
PVC flexible pipe 40mm dia.
20
-
75.13
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of pipe for wiring purposes including bends, inspection boxes etc., where necessary including painting as per PWD General Specifications (Electrical Works):- Supply and erection of 20mm dia. heavy gauge welded conduit pipe (1.60mm thick) suspension rod for ceiling fan complete in all respect as desired by the Engineer-in-charge.
35
-
85.03
PVC INSULATED SINGLE CORE FRCOPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated single core FRcopper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing. Make:-Finolex,, /RR Kabel/ Havell's .
PVC insulated copper conductor single core FRcable (ISI marked) overall 1.5 sq.mm, 1100volts grade
200
-
15.11
PVC insulated copper conductor single core FRcable (ISI marked) overall 2.5 sq.mm, 1100volts grade
450
-
21.61
PVC insulated copper conductor single core FRcable (ISI marked) overall 4 sq.mm, 1100volts grade
200
-
29.97
PVC insulated copper conductor single core FRcable (ISI marked) overall 6 sq.mm, 1100volts grade
125
-
45.01
PVC insulated copper conductor single core FRcable (ISI marked) overall 10 sq.mm, 1100volts grade
125
-
73.27
SWITCH DISCONNECTOR FUSE UNIT (With Sheet Enclosure):
Supply and erection of Switch Disconnector fuse unit with HRC Fuses in sheet enclosure on the existing surface (conforms to IS 13947 (PartI&III) complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connection on both sides of switch with sutiable size of Thimbles, including cost of HRC fuses as per PWD General Specifications (Electrical Works). 32Amp. 415volts three pole & neutral switch disconnector fuse unit with HRC Fuses in sheet enclosure
4
-
2223.66
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles and bonding to existing earth etc.
GROUP-A: (Siemens (Beta Guard/Minigard), Legrand (Ekinoxe) & Schneider (Neo Break), L&T (EXORA), HAGERSheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 4 way each
2
-
2529.26
Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 6 way each
2
-
3065.35
MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs. GROUP-A: (Siemens (Beta Guard), Legrand (Lexic) & Schneider (Neo Break), L&T (Exora,Hager)
Miniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
60
-
173.26
Miniature circuit breaker four pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
4
-
1104.33
Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaquar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Halonix including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site.
105
-
539
Supply and erection of Plastic Ventialtion Fan Ventilus 10" (250mm-900RPM) Single Phase of make Crompton , White Colour / Halonix / Havell's Ventil Air-DX White including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site
1
-
1496
Supply and erection of 12" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single Phase of make Crompton Model EXHD 300-6-1 or Its equialant Make Havell's Turbo Force SP / GE / Halonix ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site
5
-
3039
S/E of Energy Saving Fan Ceiling Fans 1200mm sweep ( 48" ) having two ball bearing but without regulator including flexible wire & petty material etc. for connections complete with erection, connections and testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make :- Crompton Entrust 50-5Star or its equillant make Havell's ES-50 Premium 5Star /Orient/Halonix
35
-
1848
Supply & erection of Computer Terminal suitable for Computer Networking with modular accessories one on. metal box 12 module 8"x6", 3 nos switch 6 Amp, 3 nos socket 3 pin 16 Amp, one nos. switch 20 Amp, one nos. socket 20 Amp and one no modular Accessories including connections & testing complete in all respect as desired by the Engineer-In-Charge at site. Make:-Northwest/Legrand (Myrus Series)/ SSK (NV Series) / Havells (Crab tree) / HAGER
11
-
1252.12
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements