Archaeological Survey Of India Tender

Providing and fixing vitreous enamel porcelain base Protection Notice Board of size {0.60x0.90} m. The board is made up of 14-gaugeMS sheet and enameled in blue and background with letters in Hindi and English with ASI logo as per approved text provided at the time of execution with MS angle frame 25x25x4mm back side of board all around and two support in MS angle 50x50x6mm and 2.80mm long in 1:2:4{1 cement ,2 sand 4 stone agg 20mm nominal size} cement concrete blocks 0.30x0.30x60m with nuts bolts welded etc. complete at Mughal Bridge Dakhni.

Providing and fixing protection notice board in Punjabi of size 0.60x0.90. The board is made up of 14gaze MS sheet and polypropylene synthetic paper in blue background with letter in Punjabi with A S I logo as per approved text provided at the time of execution with MS angle frame 25x25x4 mm back side of board all around and two support in MS angle 50x50x6mm and 2.80m long 1:2:4 (1cement ,2sand , 4 stone agg .20mm normal size ) cement concrete blocks (0.30x0.30x0.60)m with nut bolts, welded etc. complete at Mughal Bridge Dakhni.

Providing and fixing 100mm thick red sand stones (matching stones) bench with top size 1.50x0.60m and two vertical support stone of size 0.45m with molding etc. complete as per design at Mughal Bridge Dakhni.

Installation of lighting at the monument by providing solar lights of 60 watts with inbuilt solar panel of 5 v 30w in built battery of 3.2v 25AH po4 and inbuilt radar sensor for movements trcking on a MS pole of 2.5inch dia and 6mtrs height including fitting and installation at the site at Mughal Bridge Dakhni.

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminium sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reglective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backingwhich shaii be activated by applying pressure conforming to class2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost s of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet includind appropriate perming coat . The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminium sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Mughal Bridge Dakhni.

Lakhori/tile brick masonry in lime surkhi mortar 1:1:1 (1 lime, 1 surkhi, 1 coarse sand) at Mughal Bridge Dakhni.

Providing and laying lime concrete in composite mortar 1:1:1:4 (1 Lime, 1 Surkhi, 1 Coarse sand and 4 brick agg. 25mm nominal size) complete at Mughal Bridge Dakhni.

Recess pointing in lime surkhi mortar 1:1:1 (1 lime, 1 Surkhi, 1 Coarse Sand) after raking, cleaning and washing the joints etc. complete at Mughal Bridge Dakhni.

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost s of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate perming coat . The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminum sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Dakhani Sarai Dakhni

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost s of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate perming coat . The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminum sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Mohd. Momin and Haji Jamal tomb Nakodar.

Providing, drilling and installation of 9” borewell 400 feet depth including assembling lowering and fixing 9” pipes, 7.5 HP submersible motor, 3 core copper cable 6mm, starter, main switch etc. labour and material etc. complete at Mohd. Momin and Haji Jamal tomb Nakodar.

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the costs of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate perming coat . The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminum sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Noor Mahal Sarai Noor Mahal.

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost s of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate perming coat . The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminum sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Theh Ghatti Mound Nagar.

Cutting and removal of thick bushes, shrubs, small plants and vegetation grass from the monuments area and disposal of rubbish 100mtrs away etc complete at Theh Ghatti Mound Nagar.

Cutting and removal of thick bushes ,shrubs, small plants and vegetation grass from the monuments area and disposal of rubbish 100mtrs away etc complete at Ancient Site Katpalon.

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost s of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate perming coat . The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminum sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Ancient Site Katpalon.

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class 2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the costs of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate perming coat . The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminum sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Ancient Buddhist Stupa SGL-11

Providing and installation of Blue Star/Voltas water cooler of 80 lts. Along with stabilizer including all taxes etc complete at Ancient Buddhist Stupa SGL-11

Providing and Installation of Aqua Fresh/Aquaguard 50 lts/hours RO system cum water purifier with water level sensor of reputed brand including all taxes etc. complete at Ancient Buddhist Stupa SGL-11

Clearance of vegetation, thick bushes, shrubs around the main structure and monument area at Ancient Buddhist Stupa SGL-11

Providing and installation of Blue Star/Voltas water cooler of 80 lts. Along with stabilizer including all taxes etc. complete at Ancient Site Buddhist Stupa Sanghol SGL-Uccha Pind

Providing and installation of Aquafresh/Aquagaurd 50 ltr./hr. RO system cum water level sensor of reputed brand including all taxes etc. complete at Ancient Site Buddhist Stupa Sanghol SGL-Uccha Pind

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the costs of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate perming coat. The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminum sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Ancient Site Buddhist Stupa Sanghol SGL-Uccha Pind

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared at Ancient Site Sunet, Ludhiana

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the costs of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate perming coat. The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminum sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Ancient Site Sunet, Ludhiana

Providing and fixing protection notice board in Hindi, English of size 0.60x0.90. The board is made up of 14gaze MS sheet and polypropylene synthetic paper in blue background with letter in Punjabi with A S I logo as per approved text provided at the time of execution with MS angle frame 25x25x4 mm back side of board all around and two support in MS angle 50x50x6mm and 2.80m long 1:2:4 (1cement ,2sand , 4 stone agg .20mm normal size ) cement concrete blocks (0.30x0.30x0.60)m with nut bolts, welded etc. complete at Ancient Site Ropar

Providing and fixing protection notice board in Punjabi of size 0.60x0.90. The board is made up of 14gaze MS sheet and polypropylene synthetic paper in blue background with letter in Punjabi with A S I logo as per approved text provided at the time of execution with MS angle frame 25x25x4 mm back side of board all around and two support in MS angle 50x50x6mm and 2.80m long 1:2:4 (1cement ,2sand , 4 stone agg .20mm normal size ) cement concrete blocks (0.30x0.30x0.60)m with nut bolts, welded etc. complete at Ancient Site Ropar

Clearance of Vegetation, grass, thick bushes, shrubs from the monument area and disposal the same as per instructions of site incharge at Ancient Site Ropar

Supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type -3 of ASTM-D-4956-01 as approved by Engineer-in-charge .Letters boards etc. as per IRC67-2001 in silver white with blue colour back ground and with high intensity grade ,pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class2 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys , rivets or bolts and nuts @300mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the costs of epoxy painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate perming coat. The rate including the cost of rounding off the corners, lowering down the the structural frame work from the gantry fixing and erecting the same in position all complete as per drawing specification and direction of the engineer-in-charge .The aluminum sheet of size 2440mmx1830mm to be riveted on 50mmx50mmx1.25mm MS tube frame all around with one horizontal and two vertical supports in between .The vertical arms of height 4330mm will be made by 80mm OD circular/round MS pipe with a minimum thickness 1.25mm at Ancient Site Ropar