Airports Authority Of India Tender

Dismantling stone slab flooring laid in cement mortar includingstacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level. Cement mortar 1:4 (1 cement : 4 coarse )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as per direction of Engineer-in-charge. 15mm nominal bore

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc. complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runnerwith suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. b) GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS:7231, wih all fittings and fixtures complete , including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. Pan of size 580x440 mm with integral type of foot rests.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

Providing and fixing of modular toilet cubicles consisting of high pressure 12 mm thick compact laminate board (merino or equivalent) as per IS 20146 and as per fire retardant BS-476/97 standards with phenolic core panels for partitions of intermediate divider, doors and pilasters. The cubicle shall have dimensions of 1500mm depth x 900mm width x 2000mm height with a door size of minimum head rail on top of panels and panels shall be fixed on the floor with a clearance of maximum 150mm using stainless steel satin finish adjustable legs screwed to the floor included stainless steel (SS) lock set, SS door knob, SS gravity self closing hinge, SS coat hook with door stopper, SS U channel, SS head rail, SS adjustable foot, SS tabular holder, SS head rail wall bracket, SS head rail corner connection and SS noise reducing tape, etc. all completer as per direction of Engineer in charge.

Providing and fixing toilet paper holder C.P. brass i/c fixing with CP Brass screws complete as per direction of Engineer-in-Charge.

Providing & fixing of white vitreous China wall mounting cascade type water closet (American Standard Cat No. TF-3128 / Kohler Cat No. K-18131X-O / Hindware cat. no. 270409 /Roca Cat No. R038046+R039046 / Cera cat No. 2058 or approved equivalent) with CP bolts, nuts, CI chair hanging arrangements, bakelite seat & cover with CP hinges & rubber buffers, CP brass screw, washer with all accessories with WC connector with Rubber Lip / Buffer and side gap filled with silicon sealant wherever required with concealed type dual flush cistern (Hindware cat no. 506743 + 506751 / Grohe Cat No. 38661 / Kohler cat no. K-4178 / Roca Cat No. R490299+R490128 /Cera cat No. 2607 or approved equivalent) comprising of actuator button facia assembly including brass / SS screws and washer complete including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-Incharge.

Providing and fixing of following C.P. Brass fittings and fixture of Jaquar / Kholer / Hindware make complete as per direction Engineer in charge. Press matic bib cock (a) Press matic pillar cock

Providing and fixing of following C.P. Brass fittings and fixture of approved make completer as per direction Engineer in charge. Chromium plated anti cockrage Jali of approved make of 100 mm dia fixing over water outlet complete as per direction and satisfaction of Engineer-in-charge

Providing and fixing of following C.P. Brass fittings and fixture of approved make completer as per direction Engineer in charge. P/F two way quarter turn Bib cock 15mm nominal bore of approved make (Jaquar / Cera or equivalent) complete as per direction of Engineer-in-charge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing all completer as per direction of Engineer in charge. Rectangular shape 1500x450 mm

P/F health faucet of make Cera model no. F8030101/ Jaquar or Equivalent ABS body with wall hook and 1 meter PVC hose pipe or equivalent as per direction of Engineer-in- charge.

Providing and fixing table top wash basin (Ivory colour) of make Cera Model CASKET (Code no. S2020108) / parry ware/ hindware of size 470 X 470 mm including painting of fittings and brackets, cutting and making good the walls wherever require all completer as per direction of Engineer-in-charge.

Providng and fixing stainless steel soap dispenser in the toilets/Terminal Building etc. Complete as per direction of Engineer-in-charge. Stainless steel Soap dispenser -800ml capacity (model no. ES04 Euronics make / Kohlar or equivelant)

Providng and fixing stainless steel swing handicap grab bar in the toilets/Terminal Building etc. Complete as per direction of Engineer-in-charge. Stainless steel swing handicap grab bar (model no. EGR (S02) Euronics make or equivelant)

Providng and fixing stainless steel handicap grab rail in the toilets/Terminal Building etc. Complete as per direction of Engineer-in-charge. Stainless steel handicap grab rail 600mm length, 32mm dia (model no. EGR (01) Euronics make / Kohlar or equivelant)

Providng and fixing stainless steel Paper Dispenser in the toilets/Terminal Building etc. Complete as per direction of Engineer-in-charge. Stainless steel Paper dispenser - (model no. EP01 Euronics make / Kohlar or equivelant)

Providng and fixing stainless steel wall mounted waste receptacle in the toilets/Terminal Building etc. Complete as per direction of Engineer-in-charge. Stainless steel wall mounted waste receptacle (model no. KINOX (KWR) Euronics make / Kohlar or equivelant)

Providing, supplying and fixing 12mm clear toughened glass of Saint Gobain or equivalent with necessary fittings with stainless steel cover and the glass should be fixed to the wall including filling the gaps with silicon sealant complete in all respects as per the directions of Engineer-in-charge.(Fittings should be of make of DORMA/OZONE or Equivalent)

P/F Gurware/Avery dennison/3M film on glass panes after thoroughly cleaning of existing surface all complete as per direction and satisfaction of Engineer in charge. a) Designer printed coloured film high quality graphics on self adhesiv vinyl Note: The sample of film shall be got approved by the Engineer - in charge. The agency shall give minimum 03 years warranty of the film.

Providing and fixing 19mm thick water proof marine plywood of Centuray /Merino/Greenply make or equivalent conforming to IS: 710 on the wooden frame work with necessary screws and nails e.t.c ., complete as per the directions of Engineer in Charge.

Providing and fixing of acrylic solid surface Hanex/Corian dupont/Samsung staron/LG Hausys HIMACS make 12mm thick as per specifications, colour, shape and size as per drawing/design approved. Fixed to 12mm thick or thicker ply with silicon sealent inclusive of all bending, moulding, jointing, adhesive polishing etc., complete as per the directions of Engineer in charge. (sample, shade and series shall be approved by EIC)

Credit for taking away old dismantled C.P. Brass bib cock, bottle trap, Pillar cock, health faucet, toilet paper holder and similar C.P. Brass items including loading from as and where basis all complete.

Credit for taking away old dismantled flush door, laminated board cubicle and similar wooden items including loading from as and where basis all complete.

Credit for taking away old dismantled G.I. Angles, G.I. pipes and similar items including loading from as and where basis all complete.

Providing and fixing half stall back electronic flushing system (EFS) OF CERA make model no S4010102/ parryware / kohlar or equivelant i/c battery operated sensor, cp brassbottle trap all complete as per direction of engineer in charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend

Providing and fixing urinal partition made up to 10mm thick toughened frosted glass of size 1050 mm length 450 mm width one side and 300 mm other side with edge moulding & polishing.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150 x 10 mm

Providing and fixing S.S handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. Brass pillar taps, 32 mm C.P. brass waste of standard pattern, including white vitreous china pedestal, painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 540 x 400 mm with a single 15 mm C.P. brass pillar tap.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Supply of LED downlight luminaire having capacity in the range of 18W to 20W (required CCT 5700K) designed with efficient heat dissipation and higher efficacy, Powder coated Pressure Die Cast extruded aluminium housing, with high efficiency electronic driver, confirming to IP 20 protection including all accessories etc. complete as required.

Supply of LED downlight focused type (Spot light) luminaire having capacity in the range of 18W to 20W (required CCT 6000K) designed with efficient heat dissipation and higher efficacy, Powder coated Pressure Die Cast extruded aluminium housing, separate high efficiency electronic driver, confirming to IP 20 protection including all accessories etc. complete as required.

Supply of LED Flexi strip having capacity in the range of 20W to 25W with driver (required CCT 3000K) designed for high brightness. The LED shall be for light source for indoor application only and suitable for cove-lighting, decorative lighting etc. confirming to IP 20 protection including all accessories etc. complete as required. (01 roll = 05 meter).

Installation, testing and commissioning of pre-wired, LED fittings of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supply & fixing of hand driers (for medium traffic) made out of stainless steel suitable for operation on 230V, 50Hz, single phase, AC supply complete as required at site.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 X 2.5 sq. mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (64.1) 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required (65.1) 1 or 2 Module

3 Module