Puducherry Slum Clearance Board Tender

CODE NO : 4.1.10: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

CODE NO : 4.3.1: Centring and shuttering including strutting , propping etc. and removal of form work for - foundations, footings, bases for columns

CODE NO: 4.1.5: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

CODE NO : 4.1.3: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

CODE NO : 5.12: Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands,copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

CODE NO : 5.22.7: Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated ars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

CODE NO : 7.16MO: Cement plaster 12mm thick in cement mortar 1:3

CODE NO:6.1.2 : Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand)

CODE NO: 16.68: Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand , filling the joints with coarse sand etc. all complte

CODENO:7.23A.MO: Providing and fixing premoulded bitumen joint filler, for expansion joints including the cost of sealing compound and priming coat - 12 mm wide

CODE NO: 23.26: Providing and fixing M.S.tree guard 45 cm square inplan, height 1.20 metre above ground level and 0.4 metre below ground level. The vertical members shall consist of four nos.angle iron of size 25x25x3mm ,1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm , 1.2 m long.The vertical members shall be welded to 4 nos 25x6 mm M.S. flats placed horizontally around the vertical member of the cage. One name plate of 1mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD / any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc,complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect

CODE NO.15.2.1: Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

CODE NO.NONPSR: Disposal of scarified road materials and debries rate including that of transporation of 2Km lead, loading and unloading etc. completed as directed by Engineer -in-charge.

CODE NO.10.25.2: Steel work welded in built up sections / framed work , including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder,railings, brackets,gates and similar works

CODE NO.13.61.1: Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work