Puducherry Adidravidar Development Corporation Limited Tender

Code No.13.37.1:- White washing with lime to give an even shade - new work (three or more coats)

Code No.14.26.1.1B:- Providing and fixing 25mm thick shutters for cup board etc - Panelled or panelled & glazed shutters - Burma teak wood including nickel plated bright finished M.S. piano hinges with necessary screws

Code No.9.1.2P:- Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) - Padak wood.

Code No.14.66.1:- Finishing walls with acrylic smooth exterior paint of required shade - old work (two or more coats applied @1.67 ltr / 10 sqm) on existing cement paint surface

Code No.13.50.1:- Applying priming coat - with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Code No.13.50.3:- Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works

Code No.13.61.1:- Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

Code No.15.25:- Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Code No.8.12:- Providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as - flamed finish granite stone slab Jet black , Cherry red, Elite brown, Cat eye or equivalent

Code No.5.17:- Providing, hoisting and fixing upto floor five level precast reinforced cement concrete in vertical and horizontal fins individually or forming box louvers setting in cement mortar 1:2 (1 cement : 2 coarse sand), including the cost of required centering, shuttering but excluding the cost of reinforcement, with 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Code No.10.25.2:- Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. asrequired - in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Code No.5.22.7:- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Code No.16.100:- Acid cleaning for the existing Mosaic floors, glazed tiles work and removing the stains and decays to give a glassy look etc complete (The Acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures)

Code No.18.54.1:- Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 86 mm long , weighing not less than 88gms

Code No.12.41.2:- Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes -110 mm diameter

Code No.12.42.6.2:- Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe

Code No.12.42.5.2:- Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend.

Code No.12.77:- Chipping and rackout the damaged pressed clay tile joints on roofs and fill the joints with cement mortar 1:4 (1 cement : 4 fine sand) admixed with cera latex SBR @ 2kg per bag of cement and neat finishing complete . The rate includes cost of cement, admixture, labour etc.

Code No.17.13.1:- Providing and fixing white vitreous china water closet squatting pan (Indian type) - long pattern W.C. pan of size 580mm

Code No.3129:- 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha

Code No.31.160.1B:- Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 25mm dia.

Code No.9.118.1:- Providing and fixing to existing door frames - 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59 x 24 mm and wall thickness 2 mm (+- 0.2 mm) with inbuilt edging on both sides . The styles and rails mitered and joint at the corners by means of M.S. galvanised / plastic brackets of size 75 x 220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S.tube of size 20x20 mm and 1mm (+- 0.1mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100 x 24 mm and 2 mm (+-0.2 mm) wall thickness, fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm (+_ 0.1mm) wall thickness. They panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S.rod and fastened with nuts and washers, complete as per manufacturer's specification (For W.C. and bathroom door shutter)

Code No.14.78:- Cleaning of under ground sump, Over Head R.C.C. tank (independent staging) including disposal of slit and rubbish. The cleaning shall consist following operations: i) Tank shall emptied of water by pumping and bottom shall be cleaned of slit and other deposits. ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. iii) Chlorination of RCC internal surface by liquid Chlorine. iv) the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. v) Finally the surface shall be treated with ultraviolet radiation etc.

Code No.30.38:- Desilting the canal by removing silt, slush cum 236.19 and debries from the bed of the drain removing the grass, buses etc., complete in unhygenic and foul condition including disposal of the same within an average lead of 1KM without polluting the environment by manual means

Code No.31.250.1C:- Supplying of electrically operated wet type submersible motor and pumpset (Texmo/KSB/Taro/Kirloskar make), AC 3 phase, 415 volts, 50 Hz, 2900-3000 RPM. The pump shall have brass impeller, high grade steel shaft with sufficient stages having outlet size of 2"/2.5"/3" dia. to suit the borewell (150 / 200mm dia.), complete. The rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning. (7.5 HP Submersible motor and pumpset).

Code No.NPSR:- Supplying and fixing of 20-24W tube light fitting. Make: Philips/Havels /wipro

Code No.NPSR:- Supplying of ceiling fan sweep 1200mm Fushion - 50 Energy saving fan five star. Make Havells. Rate App.Lr.No.605/PW/SE-I/AE(P)-II/F.No.221/2014-15 dt.02.02.2015.

Code No.1.44 Installation, testing and commissioning of ceiling fan, per including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc as required