Puducherry Adidravidar Development Corporation Limited Tender

1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc.directly on ceiling/wall, including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required

NPSR Supplying of ceiling fan sweep 1200mm Fushion - 50 Energy saving fan five star. Make Havells. Rate App.Lr.No.605/PW/SE-I/AE(P)-II/F.No.221/2014-15 dt.02.02.2015.

1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc as required

1.1.3 Wiring for light point/fan point/exhaust fan point /call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - GROUP C

1.23.1 Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc. as required - 5/6 A switch

1.23.4 Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc. as required - 3 pin 5/6 A socket outlet, piano type ISI marked

1207 48W LED Street Light Fitting (Philips / Havells)

17.2.12 Supply and fixing of wall mount bracket of 50 mm dia GI pipe suitable for SVL/MH fittings with clamp, bolts and nuts as required

3329 Analog Ammeter direct/ CT Range 0-30A. Make:Siemens/L&T-Hagger /Legrand-Lexic

3334 100/5A current transformer (0.5% precision. Make:L&T-Hagger/ Legrand-Lexic - Burden 5VA

3331 Analog voltmeter Range 0 - 500 V.Make:Siemens/L&T-Hagger/Legrand-Lexic

Code No 18.54.2 Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 122 mm long, weighing not less than 99 gms

Code No31.145.1A Providing and fixing in position G.I. coupling (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 15 mm dia.

Code No 31.148.1A Providing and fixing in position G.I. pipe nipple 10cm long, including labour charges for jointing, jointing materials etc,complete -15 mm dia.

Code No 16.1 Acid cleaning for the existing Mosaic floors, glazed tiles work and removing the stains and decays to give a glassy look etc complte (The Acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures)

Code No 9.141 Providing and fixing PVC door frame of size 50 x47 mm with a wall thickness of 5mm (+- 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190mm x 100mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40 x 20 mm M.S. rectangular tube of 0.8mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x 100 mm long anchor fasteners complete all

Code No .9.146 Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (+- 0.2 mm) with in built beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm X 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (+- 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (+- 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification

Code No 31.161.1F Providing, laying and jointing UPVC pipes(Finolex/jain/Supreme/Truebore/ Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 110mm dia.

Code No 12.43.2 Providing and fixing unplasticised - PVC each pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm

Code No 31.168.1I Providing and fixing in position UPVC moulded elbow (Finolex / jain) (1 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 110mm dia

Code No 18.9.12 Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 25mm nominal outer dia pipes

Code No 18.9.13 Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 32mm nominal outer dia pipes

Code No 14.78 Cleaning of under ground sump, Over Head R.C.C. tank (independent staging) including disposal of slit and rubbish . The cleaning shall consist following operations: i) Tank shall emptied of water by pumping and bottom shall be cleaned of slit and other deposits. ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. iii) Chlorination of RCC internal surface by liquid Chlorine. iv) the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. v) Finally the surfcae shall be treated with ultraviolet radition etc.

Code No14.1.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4fine sand)

Code No13.46.1 Finishing walls with acrylic smooth exterior paint of required shade - New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm

Code No. 6.4.2 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand)

Code No. 5.9.3 Centering and shuttering including strutting , propping etc and removal of form for - Suspended floors , roofs , landings , balconies and access platform

Code No. 5.1.2 Providing and laying in position specified grade of reinforced cement concrete ,excluding the cost of centering shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Code No. 5.22.7 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Code No. 13.1.2 12mm cement plaster of mix -1:6 ( 1 cement : 6 fine sand)

Code No. 13.46.1 Finishing walls with acrylic smooth exterior paint of required shade - New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm

Code No. 14.64.1 Finishing walls with water proofing cement paint of required shade - old work (one or more coats applied @2.20 kg/10sqm) over priming coat of primer applied @0.8 litres / 10 sqm complete including cost of priming coat.