Puducherry Adidravidar Development Corporation Limited Tender

code no:9.48.1 Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to steel windows by welding.

Code No:11.36A:- Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson /Asian / Somany / Nitco) in all colours,shades of size 200 x 300 mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm.Including pointing in white cement mixed with pigment of matching shade complete. -size 200x300mm

code no:11.38.1 Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) , of 1st quality conforming to IS :15622, of approved make (Nitco / Kajaria ) in all colours, shades, except white , ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., complete

code no 11.41.2A Providing and laying fully vitrified floor tiles of size 600 x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make (Nitco / Rak / Johnson /Asian ) in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) , including grouting the joints with white cement and matching pigments etc., complete - size of tile 600 x600 mm

Code No:12.41.1:- Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 75mm diameter.

Code No:12.41.2:-Providing and fixing on wall face metre unplasticised rigid PVC rain water pipesconforming to IS : 13592 type A includingjointing with seal ring conforming to IS :5382 eaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter.

Code No:12.42.5.2:-Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Bend 87.5deg. 110mm bend.

Code No:12.42.6.2:-Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (plain)110mm shoe.

Code No:12.43.2:-Providing and fixing unplasticised - PVC clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm

Code No:12.50:- Supply and installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved) 0.50mm +/- 5% total coated thickness (TCT) thick Zinc coating 120 gsm as per IS:277 in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns mimimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired.The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55mm) with EPDM seal or with polymer coated J or L hooks , bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required.

Code no:21.3.1 Providing and fixing glazing in aluminium door, window , ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of 4.0 mm thickness

Code No:13.1.1:-12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand)

code no:13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer

Code No:14.1.1:-Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and lastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - With cement mortar 1:4 (1 cement : 4 fine sand)

Code No:14.54.1:-Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

Code No:14.66.1:-Finishing walls with Acrylic Smooth exterior paint of required shade - Old work (Two or more coat applied @ 1.67 lts/10sqm.)

Code No:15.23.1:-Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead - For thickness of tiles above 10mm and upto 25mm.

Code No:16.100:- Acid cleaning for the existing Mosaic floors, glazed tiles work and removing the stains and decays to give a glassy look etc complete (The acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures)

Code No:18.9.22:-Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Concealed work including cutting chases and making good the walls etc.)- 25mm nominal outer dia pipes

Code No:18.49.1:- Providing and fixing CP brass bib cock of approved quality conforming to IS 8931 - 15mm nominal bore.

Code No:31.10.3.3:- Providing and fixing ball valve (brass) of approved quality complete - high or low pressure with plastic floats - 25mm nominal bore.

Code No:1639:- Providing and fixing unplasticised - PVC Slotted cowl (terminal guard)75mm dia

code No:16.95 Supplying fixing and commisioning of Suguna the cost of pumpset , pumpset fixing in position and test run etc.complete / Texmo / Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include

NPSR: Fabrication, supply, erection, testing and commissioning of one no of three phase metering panel board for the power supply of over all size 1100mm x 650mm x 250mm made out of 16SWG thick cold rolled M.S. Sheet. The panel has to be mounted on MS angle frame fixed suitably on the wall. The panel board has to be fitted 1no. of 125A cubical switch without SS enclosure excluding fuse link bolted type (Make – Standard / C&S), 3nos. of 100A rewireable porcelain fuse unit – 415V (Make – Kundan/Havells), 3nos. of signal lamp and toggle switch units are to be fixed with in the allotted size in the 10mm hylem sheet. Interior connection between the switch fuse units are to be done with 10.0sqmm ISI marked, FR PVC insulated, single core copper conductor cable. (Make – Finolex / Polycab). The door should be of flush type inter locking in one position and 2nos. of 200mm x 150mm M.V. danger notice plate are fixed in the front side door of the panel board. The panel provided with removable type gland plated to the bottom and with sufficient holes of required diameter. The panel should be painted with two coats of rust proof Zinc chromate and two coats of anti corrosive epoxy shade 631 siemens grey paint after completion of de-rusting process. The cost should be inclusive of minor modification suitable for site condition as approved by the engineer – in – charge. APP.Lr.550/PW/SE-I/AE(P)/ F.No.300 /2009-10/dt.17/06/2009.

NPSR:-Supplying and fixing of 30-36W slim type recess mounted square LED luminaire of size 2' X 2' Make:Wipro/jaquar/Philips (Approved no:325/PW/SE-1/AE(P)-1/F.NO.CB312 (Elect)/2018-19, Dt.30.01.2019.)

NPSR:-Supplying and fixing of 20-24W slim type recess mounted square LED luminaire of size 1' X 1' /1.25' X 1.25' Make:Wipro/jaquar/Philips. (Approved no:325/PW/SE-1/AE(P)-1/F.NO.CB312 (Elect)/2018-19, Dt.30.01.2019.)