Public Works Department Tender

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10mm to 25mm.

15.1 Demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres.

11.40.4 Providing and laying rectified ceramic rustic / matt finish floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of commercial quality conforming to IS: 15622 of approved make (Somany / Nitco) in all colours shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

11.41.2C Providing and laying fully vitrified floor tiles of size 600 x 600 mm (thickeness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make (Nitco / Rak / Johnson/Asian) in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete – size of tile 600 x 600mm - Commercial quality.

13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work.

10.25.2 Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

9.141 Providing and fixing PVC door frame of size 50 x47 mm with a wall thickness of 5mm (+- 0.2 mm ) , made out of single piece extruded PVC profile , with mitred cut joints and joint with 2 nos of PVC bracket of size 190mm x 100mm long arms of cross section size 35 x 15 mm & self driven self taping screws , the vertical door profiles to be reinforced with 40 x 20 mm M.S.rectangular tube of 0.8mm, including providing EPDM rubber gasket weather seal throughout the frame , including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x 100 mm long anchor fasteners complete all.

9.142.1 35 mm thick factory made solid panel PVC door shutter , made out of single piece extruded solid PVC profiles , 5 mm (+_ 0.2 mm ) thick , having styles & rails (except lock rail) of size 95 mm x 35mm x 5mm , out of which 75 mm shall be flat and 20 mm shall be tapered (on both side) , having one side thickness of 15 mm integrally extruted on the hinge side of the profile for better screw holding power , including reinforcing with MS tube of size 40 mm x 20mm x 1 mm , joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement , self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm x 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner Single piece extruted 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm ,out of which 95 mm to be flat and 20 mm to be tapered at both ends , having 15 mm soild core in middle of rail section integrally extruted , fixing the styles & rails with the help of solvent and self driven self taping screws of 125 mm X 11 mm including providing 5 mm single piece solid PVC extruded sheet inserted in the door as panel , all complete as per manufacturer's specification - Non decorative finish (matt finish) `

2.27 Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete.

4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).

5.12 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

16.95 Supplying fixing and commisioning of Suguna / Texmo / Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc.complete.

Basic Code No.3131 O Providing and fixing 450mm 1400 rpm heavy duty exhaust fan make Almonard/Orient/Usha complete as directed by the Engineer-in-charge.

Basic Code No.3129 O Providing and fixing 300mm 1400 rpm heavy duty exhaust fan Make: Almonard/Orient/Usha.

Basic Code No.3127 O Providing and fixing 1200mm sweep double ball bearing ceiling fan Make:Almonard/Usha