Public Works Department Tender

Code No. 9.145:- Providing and fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x53 mm, having wall thickness 2.0 mm (+-0.2 mm) . Both verticals sides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (+- 0.2 mm ) and 75 mm x 200 mm long , including reinforcing both ends of the top frame with PVC profile . PVC Door frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together , including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame , fixing the frame with jamb with required nos & sizes of anchor dash fastner , all complete as per manufacturer's specification

Code No. 9.146:- Providing and fixing 37 mm thick factory made PVC door shutter , styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (+- 0.2 mm ) with in built beading on one side , the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm X 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (+- 0.2 mm). Styles , rails and reinforcements to be fusion welded together . Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (+- 0.2 mm ) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails , providing with PVC snap fit beading , panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete , all as per manufacturer's specification

Code No. 11.41.2A:- Providing and laying fully vitrified floor tiles of size 600 x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make (Nitco / Rak / Johnson /Asian ) in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) , including grouting the joints with white cement and matching pigments etc., complete - size of tile 600 x600 mm