Public Works Department Tender
View complete overview of Puducherry PWD Tender
Public Works Department - PWD Tender
Civil And Construction
Eprocure
Opening Date17 Feb 2025
Closing Date10 Mar 2025
Tender Amount₹ 56,31,15,992
Costs
EMD
₹ 66,31,160Document Cost
Refer DocumentsTender Fee
₹ 1,575
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWDC3_17686_1Tender No
28/IPH/TN/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://pudutenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
PSR Item No.2.27 Sand filling in foundation trenches as per drawing and technical specificationincluding the cost of labour, material andoverhead charges.
850.53
1875
1595186
... More
PSR 2.27C.1 Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller,or wooden or steel rammers,and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lift (payment will be made based on level measurement)
564.5
832
469924
... More
PSR 4.1.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:1:2 (1 cement:1coarse sand : 2 graded stone aggregate 20mm nominal size
1603
7554
12110409
... More
PSR 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement:2coarse sand : 4 graded stone aggregate 20mm nominal size
1130.08
5565
6289912
... More
PSR 4.1.4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement :2coarse sand : 4 graded stone aggregate 40mm nominal size
199.5
5468
1090876
... More
PSR Item No. 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:4:8 (1 cement:4 coarse sand : 8 graded stone aggregate 40mm nominal size)
1444.76
4483
6477350
... More
PSR 4.3.1 Centering shuttering including struttings, propping etc. and removal of form work for foundations, footings , bases for columns. Using steel sheet with M.S.frames
40
246
9860
... More
PSR Item No 4.3.2 Centring and shuttering including strutting , propping etc. and removal of form work for - retaining walls, return walls, walls(any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
422
469
197990
... More
PSR Item No.5.1.1 Providing and laying in position specified grade of reinforced cement concrete ,excluding the cost of centering ,shuttering , finsishing and reinforcement -All work upto plinth level 1:1:2 (1cement :1 coarse sand : 2 graded stone aggregate 20 mm nominal size)
145.31
7883
1145566
... More
PSR 5.1.2 Providing and laying inposition specifiedgrade of reinforced cement concrete excluding the cost of centering,shuttering,finishing and reinforcement -All work upto plinth level: 1:1.5:3 (1 cement : 1 .5 coarse sand : 3 graded stone aggregate 20mm nominalsize)
657.78
6377
4194709
... More
PSR Item No. 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement -All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
1100
5894
6484126
... More
PSR Item No.5.2.1 Reinforced cement concrete work in walls (any thickness), including attached pilasters , buttresses, plinth and string courses , fillets, columns , pillars, piers, abutments, posts and struts etc.upto floor five level excluding cost of centering, shuttering,finishing and reinforcement: 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20mm nominal size)
83.81
8673
726901
... More
PSR 5.2.2 Reinforced cement concrete work in walls(any thickness), including attached pilasters , buttresses, plinth and string courses , fillets, columns , pillars, piers, abutments, posts and struts etc.upto floor five level excluding cost of centering, shuttering,finishing and reinforcement:1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20mm nominal size)
872.51
7166
6252983
... More
PSR 5.3 Reinforced cement concrete work in beams , suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:2:4 (1 cement :12 coarse sand : 4 graded stone aggregate 20mm nominal size
1173.8
7128
8366940
... More
PSR 5.12 Providing ,hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands , copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centring, shuttering but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
509.2
6607
3364626
... More
PSR Item No. 5.15 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete in lintels , beams and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse sand) , cost of required centring and shuttering but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
581
8499
4937948
... More
PSR Item No.5.9.1 Centering shuttering including struttings, propping etc. and removal of form work for Foundations, footings, bases for mass concrete
3821.45
246
941987
... More
Item No. 5.9.2 Centring and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
10852.2
469
5091527
... More
PSR Item No. 5.9.3 Centering shuttering including struttings, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platforms.
8788.46
491
4315837
... More
PSR Item No. 5.9.5 Centring and shuttering including strutting, propping etc. and Removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.
5380.47
396
2134379
... More
PSR Item No. 5.9.6 Centering shuttering including struttings, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts.
2369.57
580
1375606
... More
PSR 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc.,including edges.
307
558
171595
... More
PSR Item No. 5.22.6 :Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG/ IISCO / SAIL / JSW) Fe - 415 or more
493838.94
79
39393532
... More
PSR 5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work , using cement content as perapproved design mix , including pumping of concrete to site of laying but excluding the cost of centering , shuttering , finishing and reinforcement , including admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete , improve workability without impairing strength and durability . Note:-Cement content considered in this item is @ 330 kg / cum. Excess or less cement used as per design mix is payable or recoverable separately. - All work upto plinth level
91
6609
601490
... More
PSR ITEM No. 5.49 Constructing cast -in-situ RCC diaphragm wall by providing and laying machine batched, machine mixed , self compacting , ready mix reinforced cement concrete, tramie controlled , of M30 grade using minimum 400 kg. cement per cum of concrete including providing and mixing required admixtures in recommended roportions as per IS : 9103 , for achieving 150 - 200mm slump, for diaphragm wall having thickness as per approved structural design not exceeding 600 mm , in pannels of required depth and lengths as per approved drawing , including constructing necessary guide walls as required and as specified including boring in all kinds of soils and rocks, including working in or under water and / or liquid mud, in foul conditions and pumping or bailing out of water and removing slush , including diposal of earth / rock / slush etc. for all leads and all lifts , including preparing , providing and re-circulating bentonite slurry in the trench as and when required for all depths , including agitating bentonite slurry during trenching etc. providing and fixing stop ends or form tubes , upto the required depth of diaphragm wall including extracting the same after casting , including chipping off the bentonite adulterated concrete or unsound concrete upto the cut off level for obtaining the sound concrete,
4090
14682
60050239
... More
dressing undulations on the exposed face of diaphragm wall after excavation by chipping / chiseling etc. including filling the depression / cavities with sound concrete etc complete, including providing recess for bearing lates and fixing insert boxes for inclined rock anchors etc. complete as per specification and approved design , but excluding the cost of reinforcement and inserts .(Rates include cost of all inputs of labour , material and T & P , cost of handling , lifting & placing in position the reinforcement cage in the trench , including the additional cost of elding the reinforcement bars etc. involved in the work and all other incidental expenditure for completing the work. However, the actual area of the diaphragm wall , corect to two places of decimal, , from design bottom level to the design cut off level (including portion anchored in the rock upto the design bottom level) only shall be measured for payment - Excess / less cement used for design mix including the extra cement required for under water concreting is payable / recoverable separately.
-
-
-
... More
PSR 6.1.1 Brick work with common burnt clay FPS (non modular) bricks of class designation 3.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
166.37
6508
1082739
... More
PSR ITEM NO. 6.4.1 Brick work with common burnt clay FPS (Non Modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:4 (1 cement: 4 coarse sand)
1570.25
7343
11530581
... More
PSR Item No.6.13.1 Half brick masonry with common burnt clayn FPS (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level in cementmortar 1:3 (1 cement: 3 coarse sand)
412.14
820
338095
... More
PSR Item No. 6.13.2 Half brick masonry with common burnt clay FPS (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement: 4 coarse sand)
193.9
794
154011
... More
PSR Item No. 6.15 Extra for providing and placing in position 2 nos. 6mm dia MS bars at every third course of half brick masonry.
606.04
80
48756
... More
PSR ITEM NO. 7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar1:6 (1 cement: 6 coarse sand).
127.63
4015
512447
... More
PSR Item No. 7.7.1 Coursed rubble masonry (second sort) with hard stone in foundation and plinth with cement mortar 1:6 (1 cement : 6 coarse sand).
144.6
4443
642600
... More
PSR 8.10.1 Providing and fixing 18mm thick stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) and finished smooth. - White Agaria marble stone
9
1701
15313
... More
PSR Item No. 9.1.2P Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Padak wood
0.19
129514
24608
... More
PSR Item No. 9.5.1.1P Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Padak wood - 35 mm thick shutters
5.67
4414
25031
... More
PSR Item No. 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part 1) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35mm thick including ISI marked stainlesssteel butt hinges with necessary screws.
9.98
2274
22697
... More
PSR ITEM No. 9.21.2 Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part 1) non-decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. -30 mm thick including ISI marked stainless steel butt hinges with necessary screws
390.33
1787
697543
... More
PSR Item NO. 9.96.1 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc.complete:-300x16mm
178
293
52245
... More
PSR Item No.9.97.1 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :- 300x10mm
325
132
43124
... More
PSR Item NO. 9.97.4 Providing and fixing aluminium tower boltsISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : 150x10mm
382
90
34563
... More
PSR Item No. 9.100.1 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-125mm
292
61
17850
... More
PSR ITEM NO. 9.117.2 Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension , as below (tolerance +/- 1mm) with wall thickness 2.0mm +/- 02mm . Corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joint mitred and plastic wilded . The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19x19mm and 1 mm +/-0.1mm wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as manufacturers specification - Extruded section Profile size 42x50mm.
466.35
215
100354
... More
PSR ITEM No. 9.118.2 Providing and fixing to existing door frames - 30 mm thick factory made Polyvinyl Chloride (PVC) door shutters made ofstyles and rails of a uPVC hollow section of size 60 x 30 mm and wall thickness 2 mm (+- 0.2 mm) with inbuilt decorative moulding edging on one side . The styles and rails mitred and joint at the corners by means of M.S. galvanised / plastic brackets of size 75 x 220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S.tube of size 25x20 mm and 1mm (+- 0.1mm) wall thickness . The lock rail made up of 'H' section , a uPVC hollow section of size 100 x 30 mm and 2 mm (+-0.2 mm) wall thickness , fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm (+_ 0.1mm) wall thickness . They panels filled vertcally and tie bar at two places by inserting horizontally 6 mm galvanised M.S.rod and fastened with nuts and washers , complete as per manufacturer's specification.
142.56
2524
359821
... More
PSR Item No. 9.165.1A .Providing and fixing of 65mm Godrej Navtal lock of 6 levers etc complete
146
432
63200
... More
PSR ITEM NO. 10.2 Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer all complete.
1000
79
79880
... More
PSR Item No. 10.6.2 Supplying and fixing rolling shutters of approved make, made of required size M.S.laths, interlocked together through their entire length and jointed together at the end by end locks , mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to ISS :4454 -part 1 and M.S.top cover of required thickness for rolling shutters - 80 x 1.20mm M.S.laths with 1.25 mm thick top cover.
56.8
2757
156611
... More
PSR ITEM NO.10.6.3 Supplying and fixing rolling shutters of approved make, made of required size M.S.laths, interlocked together through their entire length and jointed together at the end by end locks , mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to ISS :4454 -part 1 and M.S.top cover of required thickness for rolling shutters - 80 x 1.20mm M.S.laths with 0.90 mm thick top cover.
12.6
2637
33238
... More
PSR ITEM NO. 10.7 Providing and fixing ball bearing for rolling shutters.
12
336
4043
... More
PSR 10.14.3.1 Providing and fixing pressed steel door frames conforming to IS : 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness , including hinges , jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S.pressed butt hinges 2.5mm thick with mortar guards, lock strike -plate and shock absorbers as specified and applying a coat of approved steel primer after pre - treatment of the surface - profile E - fixing with adjustable lugs with split end tail to each jamb.
191
416
79536
... More
PSR Item NO. 10.15.1 Providing and fixing M.S. tubular frames doors, windows,ventilators and cupboard with rectangular / L-type sections ,made of 1.60 mm thick M.S.sheet , joints mitred,welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer - fixing with 15x3 mm lugs 10cm long embedded in cement concrete block 15x10x10 cm of C.C.1:3:6 (1 cement : 3 coarse sand:6 graded stone aggregate 20mm nominal size)
3215
144
464760
... More
PSR ITEM No. 10.16.1 Steel work in built up tubular (round,square or rectanglar hollow tubes etc.) trusses etc., including cutting , hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - hot finished welded type tubes.
17290
118
2055781
... More
PSR Item No. 9.48.2 Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc
453.6
138
63028
... More
PSR 10.28: Providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding ,grinding. Buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complte. i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab withsuitable arrangement (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.,)
18.5
471
8721
... More
PSR 11.3.1 Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc.complete. 40mm thick with 20mm nominal size stone aggregate
756
382
289465
... More
PSR Item No. 11.5 62mm thick cement concrete flooring with concrete hardener topping under layer 50mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry but excluding the cost of nosing of steps etc. complete.
1102.08
653
720342
... More
PSR ITEM:11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the lab,including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement : 4 coarse sand) - 25 mm thick
1010
1326
1339876
... More
PSR Item No 11.36 B Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson /Asian / Somany / Nitco) in all colours, shades of size 300 x 450 mm in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointingin white cement mixed with pigment of matching shade complete. - size 300x450mm
367
909
333695
... More
PSR Item No 11.36C Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson /Asian / Somany / Nitco) in all colours, shades of size 300 x 600 mm in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointingin white cement mixed with pigment of matching shade complete. - size 300x600mm
1206.44
1062
1281372
... More
PSR Item No.11.37.1 Providing and laying ceramic glazed floor tiles 300X300mm (thickness to be specifiedby the manufacture) of 1st qualityconforming to IS : 15622 of approved make (Nitco / Kajaria) in colours such as white, ivory,grey, fume red, brown laid on 20mm thick cement mortar 1:4(1 cement : 4 Coarse sand) including pointing the joints with whitecement and matching pigment etc., complete.
108
990
107017
... More
PSR Item No.11.37.2 Providing and laying ceramic glazed floor tiles 300X300mm (thickness to be specifiedby the manufacture) of 1st qualityconforming to IS : 15622 of approved make(Bell / Johnson / Regency / Somany / Naveen/ Asian ) in colours such as white, ivory,grey, fume red, brown laid on 20mm thick cement mortar 1:4(1 cement : 4 Coarse sand) including pointing the joints with whitecement and matching pigment etc., complete
143.05
725
103847
... More
PSR Item No.11.41.2A Providing and laying fully vitrified floor tiles ofsize60x60cm (thicknestobespecified by the manufacturer) with water absorption's less than 0.08% andconforming to IS: 15622 of approved make (Nitco /Rak / Johnson/Asian) in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm.
66
1358
89631
... More
PSR Item No. 11.41.2B Providing and laying Soluble salt vitrified floor tiles of size 60x60cm(thicknes to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make (Nitco / Somany / Johnson /Asian) in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm.
6.21
1220
7582
... More
PSR 12.1.6 Earth work in excavation for foundation of structures as per drawings and technical specifications, including setting out,construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material Backfilling in Marshy Foundation Pits including the cost of labour, hire charge for tractor and overhead charge
7644
410
3136486
... More
PSR Item NO. 12.3: Sand filling in foundation trenches as per drawing and technical specification including the cost of labour, material and overhead charges.
6962
2646
18427927
... More
PSR 12.20 Providing and laying pressed clay tiles per approved pattern 18mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% intergral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete
1046.64
555
581796
... More
PSR 12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter
346
259
89797
... More
PSR Item No 12.42.3.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single Tee with door 110X110X110mm
8
271
2169
... More
PSR 12.42.4.1 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single Tee with out door 75X75X75mm
68
160
10903
... More
PSR Item No 12.42.5.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Bend 87.5deg. 110mm bend.
8
159
1278
... More
PSR 12.42.6.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (plain)110mm shoe
76
316
24087
... More
PSR 12.43.1 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, crewed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete. 75mm
184
226
41750
... More
PSR 12.43.2 Providing and fixing unplasticised - PVC clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm
244
252
61661
... More
PSR ITEM No. 12.80 Providing and fixing colour coated galvalume sheet of 550 M.P.A. yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31 mm pitch of 250 mm and overall width of 1060 mm and thickness 0.5mm with required J or C hook bolts and nuts 8mm dia G.S.paint and working etc., complete excluding the cost of purlin , rafter and truss etc.,
1255
479
602149
... More
PSR item No.13.1.1 12 mm cement plaster of mix - 1:4 (1 cement : 4 fine sand)
9535.12
193
1840278
... More
PSR ITEM No. 13.5H.1.1 Reinforced Cement Concrete in substructure complete as per drawing and technical specification -RCC Grade M35 with a minimum cement content 422 kg / cum for height upto 5m - Using concrete mixer (Formwork-10%).
942
7670
7225385
... More
PSR 13.2.1 15 mm cement plaster on rough side of single or half brick wall of mix - cement mortar 1:4 (1 cement : 4 fine sand)
1617.29
225
363923
... More
PSR item No.13.3.1 20mm cement plaster of mix -1:4 (1 cement : 4 fine sand)
3216.92
272
875195
... More
PSR Item No.13.5.1 15 mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1 cement : 4 fine sand). For internal walls with lime rendering.
408
225
91808
... More
PSR 13.6.2 20 mm cement plaster of mix 1:6 (1 cement :6 coarse sand)
3432
251
862187
... More
PSR ITEM NO.13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1cement : 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
1809
296
536007
... More
PSR Item No. 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).I428
8450.73
153
1293891
... More
PSR Item No.13.37.1 White washing with lime to give an even shade - new work (three or more coats)
7521.8
18
137273
... More
PSR 13.39.1 Colour washing such as green, blue or buff to give an even shade - New work (two or more coats) with a base coat of white washing with lime.
1816
23
43511
... More
PSR Item No. 13.40 Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat of whiting to give an even
4814.8
92
445225
... More
PSR Item No.13.41.1 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade - New work (two ormore coats) over and including priming coat with water thinnable cement primer.
3602.18
114
413422
... More
PSR Item No.13.44.1 Finishing walls with water proofing cement paint of required shade - New work (Two or more coats applied @ 3.84 kg / 10 sqm)
4746.92
68
327158
... More
PSR ITEM NO.13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm
5787.32
110
639557
... More
PSR.Item.No.13.50.3: Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.
146
38
5618
... More
PSR ITEM NO.13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work.
426
86
36968
... More
PSR Item No. 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade - Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
417.96
127
53302
... More
PSR ITEM NO.16.18.1 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal two diagonals interwoven with horizontal wires, of barbed wire 9.38kg per 100m (minimum ) between the two posts fitted and fixed with G.I staples , turn buckles etc.complete (cost of posts struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used.-with G.I barbed wire
8960
13
123827
... More
PSR ITEM NO.16.19: Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in pposite direction for 10cm length and drilling holes upto 10mm dia etc..complete
1570
74
116494
... More
PSR 16.95 Supplying fixing and commisioning of Suguna/ Texmo /Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc.complete
6
4692
28155
... More
PSR 16.96 Supplying fixing and commisioning of Suguna/ Texmo /Sharp 2HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumps fixing in position and test run etc. complete
2
11496
22993
... More
PSR ITEM NO. 16.98 Providing and fixing 20mm, thick PVC shutter for doors, windows, cup board etc., made of rigid PVC extruded multi chamber section of size 20mm x 200mm, and outer edges of shutter framed with PVC channel section of size 24mm x 59mm, having interlocking facilities. The door frame of extruded PVC section size 40x 48mm, having a maximum wall thickness of 2.80mm +/- 0.30mm. The corners and joints shall be mitrecut and welded. The rate shall include the cost of necessary hinges, handles and locking facilities wherever necessary.
2
2087
4176
... More
PSR ITEM NO. 16.99 Supplying and fixing in position precast reinforced concrete door and window frames using concrete not less than M20grade , cross section of 60 x 100 mm on 70 x 75 mm for window frames and door frames and door frames of single shutter door and 60 x 120 mm size for double shutter door, with steel reinforcement of minimum 3 bars of 6mm dia or equivalent of about 1.5 % of the sectional area of the concrete member, with smooth surface finish, using 3nos of 10mm dia bolt as hold fast on each side, alongwith suitable arrangements for fixing of hinges either with alumininum sleeve / wooden block or attaching the hinge directly to the frame by using 6mm dia m.s.bolt. Suitable arrangement should also be made in the frame for receiving tower bolt , sliding bolt and other door or window fixtures. The lost include the erection of the frame in position and grouting the joints with cement slurry 1: 1.5 (One cement and One and half sand) complete as directed by the engineer in charge. The item should be executed according to IS 6523 - 1983.
8.4
864
7265
... More
PSR 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C . Flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : white vitreous china orissa pattern W.C .pan of size 580X 440mm with integral type foot rests
43
3942
169539
... More
PSR Item No 17.1.2 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast iron ,P or S trap 10 litre low levelwhite P.V.C . Flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors whereverrequired : Stainless steel AISI -304(18/8) Orissa pattern W.C.pan of size 585x480mm with flush pipe and integrated type foot rests.
1
6741
6741
... More
PSR. Code.No: 17.5.1 Providing and fixing white vitreous china no. flat back half stall urinal of size 580 x 380 x 350 mm with white PVC automatic flushing cistern, with fittings, standard size CP brass flush pipe, spreaders with unions and clamps (all in CP brass) with waste fitting as per IS: 2556, CI trap with outlet grating and other couplings in CP brass including painting of fittings and cutting and making good the walls and floors wherever required single half stall urinal with 5 litre PVC automatic flushing cistern.
6
7267
43607
... More
PSR Item No.17.7.2 Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china wash basin size 630x450mm with a single 15mm CP brass pillar taps.
1
3098
3098
... More
PSR Item No.17.7.4 Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china flat back wash basin size 550x400mm with single 15mm CP brass pillar taps.
9
2227
20051
... More
PSR 17.7.5 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32 mm C.P.brass waste of standard pattern ,including painting of fittings and brackets ,cutting and making good the walls wherever required - white vitreous china anglet back wash basin size 600x480 mm with single 15mm C.P. brass pillar tap
22
3118
68603
... More
PSR 17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively
16
1112
17803
... More
PSR Item No. 17.31 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete.
9
1296
11667
... More
PSR Item No. 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing rectangular shape 453x357mm
1
979
979
... More
PSR 17.32.4 Providing and fixing mirror of superior number 1,774.54 glass (of approved quality) and of requiredshape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing rectangular shape 1500 x 450 mm.
10
1631
16318
... More
PSR Item No. 17.60.1.2 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet sand cast iron S&S as per IS 1729.
17
903
15360
... More
PSR 17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gm
43
570
24534
... More
PSR Item No. 18.9.11 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 20mm nominal outer dia pipes
100
152
15276
... More
PSR Item No. 18.9.13 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 32mm nominal outer dia pipes
70
203
14244
... More
PSR Item No. 18.9.31 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement,trenching refilling & testing of joints Complete (External work) - 20mm nominal outer dia pipes
70
110
7748
... More
PSR Item No. 18.9.34 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, refilling & testing of jointsComplete (External work) - 40mm nominal outer dia pipes
110
181
20011
... More
PSR Item No.18.15.2 Providing and fixing brass bib cock of approved quality - 20 mm nominal bore.
38
356
13554
... More
PSR 18.46.2 Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 20 mm nominal bore
39
212
8284
... More
PSR 18.47.5 Providing and fixing G.I. Union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 40mm nominal bore
20
617
12354
... More
PSR 18.48A Providing and placing on terrace (at all loor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank - Circular Tank
16000
7
120640
... More
PSR Item No. 18.49.1 Providing and fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore.
1
528
529
... More
PSR 18.51.1 Providing and fixing CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms - 15mm nominal bore
46
649
29878
... More
PSR 18.52.1 Providing and fixing CP brass stop cock (concealed) of standard design and of approved make conforming to IS 8931 - 15mm nominal bore
22
840
18497
... More
PSR Item No. 18.55.3 Providing and fixing PTMT stop cock of approved quality and colour Concealed stop cock,15mm nominal bore, 108mm long,weighing not less than 108 gms.
8
251
2011
... More
PSR 18.56.1 Providing and fixing PTMT pillar cock of approved quality and colour 15mm nominal bore, 107mm long, weighing not less than 110 grams
22
193
4260
... More
PSR Item No.18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 grams.
16
112
1794
... More
PSR Item No. 18.65 Providing and fixing PTMT soap dish holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements weighing not less than 106 grams
16
147
2357
... More
PSR Item No. 4.9 Precasting and placing in position 125mm dia bollards 600mm high of required shape, including providing M.S.Pipe sleeve 50mm dia 300mm long in the bollard and M.S.pipes 40mm dia and 450 mm long with 150x150x6mm M.S.plate welded at bottom and embedded 150 mm in cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450 mm deep for the same in bitumen / concrete pavement at specified spacing.
56
571
32005
... More
PSR Item No. 19.4.2.1 Providing and fixing square - mouth S.W.gully trap class SP -1 complete with C.I. grating brick masonry chamber withwater tight C.I.cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design - 150x100mm size P type - with common burnt clay F.P.S.(non modular) bricks of class designation 7.5
37
1450
53677
... More
PSR 19.32.1A Making soak pit 2.5 m diameter 3 m deep soak pit with 45 x 45 cm dry brick honeycomb shaft with bricks of class designation 75 and 110mm dia UPVC pipe (type B) 1.8 m long complete as per standard design with F.P.S bricks
9
16232
146089
... More
PSR 19.33.1 Providing and fixing on wall /column face unplasticed - PVC soil and waste pipes (type-B) conforming to IS:13592-1992 including jointing with seal ring conformation to IS: 5382 leaving 10mm gap for thermal expansion - single socketed pipes 110mm diameter
170
300
51158
... More
PSR 19.33.1C Providing and fixing on wall face/column face unplasticised- PVC moulde fittings/accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - bend 110mm
32
149
4790
... More
PSR 19.33.1D Providing and fixing on wall face /column face unplasticised - PVC moulded fittings/accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend with door 110mm
32
139
4452
... More
PSR 19.33.2 Providing and fixing on wall/column face unplasticised - PVC soil and waste pipes (type B) conforming to IS:13592 - 1992 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - single socketed pipes 75mm diameter
125
84
10538
... More
PSR 19.33.2A Providing and fixing on wall/column face unplasticisd - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion - Single tee with door - 75x75x75mm
30
173
5218
... More
PSR 19.33.2C Providing and fixing on wall face / column face unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend 75mm
30
101
3059
... More
PSR Item No. 20.1.3 Providing, driving and installing driven cast-in-situ reinforced cement Concrete piles of specified diameter and length below the pile cap M25 in cement concrete, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embeded in the pile cap etc., all complete. (length of pile for payment shall be measured from top of shoe to the bottom of pile cap) : 500mm dia. piles.
1725
2777
4790843
... More
PSR ITEM NO.21.1.1.1 Providing and fixing aluminimum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and othersections of approved make conforming to IS : 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or withexpansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminimum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminimum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings. (Glazing and panelling to be paid forseparately) : For fixed portion. Anodised aluminimum (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
78.03
479
37397
... More
PSR ITEM No. 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubularsections / appropriate Z sections and othersections of approved make conforming toIS:733 and IS: 1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron).
1299
485
630561
... More
PSR ITEM NO. 21.1.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (fittings shall be paid for separately) - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15)
68.04
549
37387
... More
PSR ITEM NO. 21.3.1 Providing and fixing glazing in aluminimum door, window, ventilator shutters and partitions etc., with PVC / neoprene gasket etc., complete as per the architectural drawings. (cost of aluminimum snap beading shall be paid in basic item) : With float glass panes of 4.0mm thickness
459.48
862
396210
... More
PSR 21.10 Providing and fixing double glazed windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specificatrions, drawings complete.
396
2996
1186452
... More
PSR ITEM NO.21.17.1 Providing and fixing PVC switch lock of 100mm length for aluminium sliding windows
23
133
3076
... More
PSR 21.17.3 Providing and fixing Anodised aluminium ,minimum anodic coating of grade AC 15 grill of required pattern / design over the doors, windows and ventilators., etc, including fixing (but excluding the cost of the sections, which will be paid separately)
3324
852
2834375
... More
PSR ITEM NO. 21.17.4 Providing and fixing Anodised aluminiumsections of AC grade 15 for fixing the grills for the doors / windows / ventilators etc., with necessary CP brass screws
84.24
659
55565
... More
PSR Item No. 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations : (a) Applying a slurry coat of neat cement using 2.75 kg / sqm. of cement admixed with water proofing compound conforming to IS :2645 and approved over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm. of cement admixed with water proofing compound conforming to IS : 2645 (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved inclulding laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cment slurry and making pattern of 300x300mm square 3mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order With average thickness of 120mm and minimum thickness at khurra as 65mm.
4525.15
1058
4788876
... More
PSR 31.9.2 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end) - 20mm nominal bore
20
174
3499
... More
PSR Item No. 31.9.5 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end) - 40mm nominal bore.
4
755
3021
... More
PSR Item No. 31.48.7A Providing and fixing C.I. non return valve (PN 1.6) conforming to IS 5312 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 50 mm dia
4
2912
11649
... More
PSR 31.51.2 Constructing masonry Chamber 60 x 60 x 75 cm inside with 35 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design - with brick class designation 35.
39
7141
278510
... More
PSR 31.160.1A Providing, laying and jointing UPVC pipes(Finolex/Jain) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation grade and alignment, testing of joints with required testing equipment,including cost of solvent cement, UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification - 20mm dia
300
24
7269
... More
PSR 31.160.1D Providing, laying and jointing UPVC pipes(Finolex/Jain) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification- 40 mm dia
290
70
20375
... More
PSR Item No. 31.277.1A Supplying and fixing of 20 X 20 mm size vaccum pump(KIRLOSKAR /MAXWELL/ DEKKAR) make 3 phase monoblock motor and pumpset complete.-0.75 KW/1 HP
2
28863
57727
... More
Providing and fixing ball valve (brass) of approved quality complete - high or low pressure with plastic floats - 25mm nominal bore.
7
452
3169
... More
PSR Item No. 7.6C MO Steel reinforcement for R.C.C. works including bending, binding and placing in position - Thermo Mechanical Treated Bars (TISCON / VIZAG / IISCO / AIL/JSW) Fe - 415 or more
463.35
76953
35656566
... More
PSR.Item.5.22.8 : Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy coating the rate includes cost of anticorrosive coating including cost of powder , sand blasting, cleaning , induction , heating , depreciation of machinery etc, wastage in cut length of bars , provision of wooden battens between rows of coated bars cover to work bush pins / bar bending machines etc - for bars of 20mm to 32 mm diametre - conforming to IS 13620 -1993
556.82
13048
7265621
... More
PSR Item No.19.6.3 : Providing and laying non - pressure NP2 class (light duty) R.C.C pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand) including testing of joints etc.complete - 250 mm dia R.C.C. pipe
3550
506
1796407
... More
PSR Item No. 22.21 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100 % polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation
24854
53
1333914
... More
PSR Item No. 30.19 Collection and supply of stone boulders at Various weights including the charges for conveyance , pre - weighing the loaded vechile and post - weighing the empty vehicle and placing the boulders to the required slope and section by using suitable machinery including handling and packing charges , crane charges etc., complete . The payment will be made based on weight basis. The quantity will be counter checked by way of volumes computed based on pre-levels and post-levels of the section and the volume thus computed will be arrived in weight after reducing for the corresponding voids depending on the size of stone boulders . This rate shall include the costs of formation of approch track for tranportations of materials men and machinery for the placing and dumping the boulders in position for groins /sea protection wall / rock revetment as per sectional drawing etc.,complete. The specific gravity of stone shall be from 2.90 to 3.02. Bedding layer after deducting 30% voids. Using 10mm to 50 kg
3668.04
720
2642786
... More
PSR Item No. 5.22.10 Providing and placing M30 grade cover block for RCC work all levels
50000
2
117000
... More
PSR ITEM No. 30.1 Earthwork in rough excavation and dressing up in embankement for roads , flood banks , marginal banks and guide banks or filling up ground depression lead upto 50 m and lift upto 1.5 m in all kinds of soil (Payment shall be made based on levels) - by manual means
4827
195
942810
... More
PSR ITEM No. 30.20 Collection and supply of stone boulders at Various weights including the charges for conveyance , pre - weighing the loaded vechile and post - weighing the empty vehicle and placing the boulders to the required slope and section by using suitable machinery including handling and packing charges , crane charges etc., complete . The payment will be made based on weight basis. The quantity will be counter checked by way of volumes computed based on pre-levels and post-levels of the section and the volume thus computed will be arrived in weight after reducing for the corresponding voids depending on the size of stone boulders . This rate shall include the costs of formation of approch track for tranportations of materials men and machinery for the placing and dumping the boulders in position for groins / sea protection wall rock revetment as per sectional drawing and harbouring works also etc., complete. The specific gravity of stone shall be from 2.90 to 3.02.Core after deducting 30% voids. Using 5kg to 100kg
14475.29
919
13303805
... More
PSR Item No. 30.20A Collection and supply of stone boulders at Various weights including the charges for conveyance , pre - weighing the loaded vechile and post - weighing the empty vehicle and placing the boulders to the required slope and section by using suitable machinery including handling and packing charges , crane charges etc., complete . The payment will be made based on weight basis. The quantity will be counter checked by way of volumes computed based on pre-levels and post-levels of the section and the volume thus computed will be arrived in weight after reducing for the corresponding voids depending on the size of stone boulders . This rate shall include the costs of formation of approch track for tranportations of materials men and machinery for the placing and dumping the boulders in position for groins / sea protection wall / rock revetment as per sectional drawing and harbouring works also etc., complete. The specific gravity of stone shall be from 2.90 to 3.02.Toe after deducting 30% voids. Using 100kg to 300 Kg
8324
919
7650339
... More
PSR ITEM NO 3.3 Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead 50 metres) including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.
32880
65
2158901
... More
PSR Item No.4.2.1 Construction of granular sub-base by cum 1,614.13providing coarse graded material,spreading in uniform layers with motorgrader on prepared surface, mixing by mixinplace method with rotavator at OMC and compacting with vibratory roller toachieve the desired density, complete asper clause 401 of MoRTH specification, 4thRevision - For grading I material.
736
1628
1198767
... More
PSR ITEM NO 4.3B Laying and spreading available soil in the sub-grade on a prepared surface, pulverising, mixing the spread soil in place with rotavator with 3 percent slaked lime having minimum content of 70 percent CaO, grading with motor grader and compacting with the road roller at OMC to the desired density to form a layer of improved sub-grade - by manual means. (As per MoRTH specification, 4th Revision)
8559
270
2318719
... More
PSR ITEM NO 4.1A.1 Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401of MoRTH specification, 4th Revision - by plant mix method for grading I material.
12382
1700
21059801
... More
PSR 4.2.3 Construction of granular sub-base by providing coarse graded meterial, spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRTH specification, 4th Revision - For grading III material
509
1613
821419
... More
PSR ITEM NO. 4.9.1.1B Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum/gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by mechanical means - Water bound macadam Gr-I with Gravel screening. (As per MoRTH specification, 4th Revision)
6534
1676
10953990
... More
PSR Item No.4.12A Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density - Using vibratory roller. (As perMoRTH specification, 4th Revision)
332
1780
591076
... More
PSR ITEM NO.4.91A Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform hickness, hand packing, rolling with smooth three wheeld steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type A 13.2mm stone for screening and gravel for binding to fill up the interstices of coarse aggregate,watering and compacting to the required density - by manual means - Water bound macadam Gr-I with stone screening. (As per MoRTH specification, 4th Revision)
3625
2119
7683260
... More
PSR ITEM NO.5.3B Providing and laying bituminous macadam with hot mix plant of capacity not lessthan 40 -60 TPH using crushed aggregates of specified rading premixed with bituminous binder, transported to site, laid over a previously repared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 507.7 of MoRTH specification, 4th Revision, to achieve the desired compaction. - using grade II metal and bitumen 60/70 grade.
1555
6186
9620505
... More
PSR Item No. 6.1 MO Cleaning the existing W.B.M. road surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with rooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. As per clause no 502.4.2 and 503.3.1 of MOST Specification.
19400
22
427770
... More
Item No. 6.5E.1 MO Providing and applying tackcoat on the prepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on black topped surface bitumen @ 5kg/10sqm.
19400
24
480150
... More
PSR ITEM NO 6.11B. MO Providing and laying open graded premix carpet 20mm thick on prepared surface in a single course as wearing course composed of specified size of stone aggregates premix with a bituminous binder in mini hot mix plant 6 to 10 tonne laying manually and rolling with power roller 8 to 10 tonne but excluding cost of primer/tack coat. As per clause no 509 of MOST specification.
19405
138
2688175
... More
PSR ITem No. 5.2 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg. per sqm. on the prepared bituminous / granular surface cleaned with mechanical broom. (As per MoRTH specification, 4th Revision)
19405
8
169600
... More
PSR Item No. 7.1A.MO Cement concrete 1:4:8 mix with stone aggregate 40mm nominal size in foundation upto a depth of 1.5 metres below ground level and upto height of 1.5 above ground/bed level
271
4326
1172449
... More
Non PSR Item: Desiltation by Dredging from backwater using cutter section dredgers for required depth including fixing of pipelines floaters and floating pipeline for disposing of water slurry consisiting silt and sand etc., up to a distance of 500 m. The rate shall include the cost of labour, materials, consumables. POL, spare parts and accessories required to keep dredger in running condition, maintenance of dredgers, tools and plant etc., including mobilisation, demobilisation charges etc., complete in accessories with all lead lift. The job includes all pre and post dredging surveys for payment purpose.
407434
210
85561140
... More
NON PSR Item: : Extra for laying earth by mechanical means as per specifications for compaction in 250mm thick loose layers when laying of earth in layers is done from stacked materials including breaking of clods and dressing but excluding rolling and watering including cost of all labour, HOM of machineries complete as per specifications.
125812.8
23
2906276
... More
NON PSR Item: Extra for rolling to specification with power roller 8-10 tonne when earth is at suitable moisture content with desired field density not less than 100% of maximum dry density (ordinary proctor test) including HOM of machineries complete as per specifications.
125812.8
9
1197738
... More
NON PSR: Supplying and filling of Good earth in the low-lying area including watering ramming and consolidation with Steel road roller 8 - 10T capacity. All as per the inspection of Engineer-in-Charge.
44498.7
111
4971840
... More
Non PSR Providing and laying unscrened Gravel boulders to a specified consolidated thickness for sub base including stacking of the material to the departmental gauge on road side for pre measurement the volume of stacks calculated asper actual measurement shall be reduced by 15% for looseness in stacking to arrive at the net quantity. The rate shall be including labour charges for spreding hand packing to the required camber and graded and rolling with power roller hire and fuel charges for all tools and plants employed and the cost of boulders etc., complete by the Engineer-in-charge.
2458
922
2267898
... More
NonPSR : Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine aggregate) laid and joined with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as per direction of Engineer-in-charge - Polished granite stone slab of colour black, cherry/ ruby red or equivalent
2179
2521
5494261
... More
NON PSR: Providing and fixing PVC Nahanitrap of 75 mm dia
42
24
1048
... More
GST @ 18%
1
70278680
70278680
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%