Pradhan Mantri Gram Sadak Yojana Tender

Construction of embankment using tractor with grader with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 (Filling with Cut Earth)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401 (Granular sub base Gr-III)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 (Gravel Shoulder)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on a well prepared surface and compacting with vibratory roller to achieve the desired density

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.275 kg per sqm on the prepared granular surface treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A as per Technical Specification Clause 510

Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates using penetration grade bitumen and CMR BIT PLAST to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A as per Technical Specification Clause 508.

Providing and laying seal coat using penetration grade bitumen and CMR BIT PLAST sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A as per Technical Specification Clause 510

Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint.

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD-specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour, All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and fixing PMGSY 'Logo' Board with separate descirption board at the starting point / intermediate distance as per standard drawing of PMGSY scheme. The top most plate will be in diamong shape of 600 mm x 600 mm size and the lower MS plate will be of size 1100 mm x 300mm and 1.6 mm thick (Angular cut at one end showing the direction / plain end for PMGSY scheme name). The MS sheet (1.6 mm thick) shall be strengthened by 25 mm x 5mm MS flat iron on logo and on bottom plate at edges. The iron frame of both the boards shall be fixed welded to single 75 mm x 75 mm(12 SWG) sheet tube post. The post shall be embedded in cement concrete M15 grade block of 450 mm x 450 mm x 600 mm below the ground level. The height of the bottom of the lower plate will be 1200 mm from the bottom of the post. The spacing between the top diamond shape board and lower plate shall be 150 mm. The PMGSY logo and lettering in the description board shall be painted with ready mixed synthetic enamel paints of superior quality in required shade and colour as specified. All the sections of frame and posts shall be painted with primer and two coats of Epoxy paint. The desing, painting and lettering shall be done as per approved drawing.

Providing and Fixing 'Citizen information board' for PMGSY Project as per MORD-specifications and drawing. The frame for the board shall be made with 2 Nos. of horizontal member MS tubes and 2 nos vertical members (75 mm x 75 mm of 12 SWG tubes) posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. The main frame shall be stiffened and welded with inner frame using MS tubes 47mmx47mm of 12 SWG comprising 4 horizontal members and 2 vertical members. Two MS sheets of size 900 mm x 750 mm and 1.6 mm thick duly welded with MS flat iron 25mm x 5mm size on back on edges for information messages shall be fixed firmly to the inner frame.. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All the sections of frame and posts shall be painted with primer and two coats of Epoxy paint. The desing, painting and lettering shall be done as per approved drawing.

Providing and Fixing 'Maintenance information board' for PMGSY Project as per MORD-specifications and drawing. The frame for the board shall be made with 2 Nos. of horizontal member MS tubes and 2 nos vertical members (75 mm x 75 mm of 12 SWG tubes) posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. The main frame shall be stiffened and welded with inner frame using MS tubes 47mmx47mm of 12 SWG comprising 4 horizontal members and 2 vertical members. Single MS sheets of size 1500 mm x 900 mm and 1.6 mm thick duly welded with MS flat iron 25mm x 5mm size on back on edges for information messages shall be fixed firmly to the inner frame.. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All the sections of frame and posts shall be painted with primer and two coats of Epoxy paint. The desing, painting and lettering shall be done as per approved drawing.

Providing and fixing of Retro Reflectorised Cautionary, Mandatory Signs with Definition Plate made out of High Intensity Grade Prismatic Sheeting conforming to IRC-67:2010 & ASTM D 4956-09,Type IV Specification and Fixed over 1.5 mm thick Aluminium Sheet Fixed on back support Frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle iron post 75mm x75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45cm x 60cm below Ground Level etc Complete including 7 years warranty for the Retro Reflective Sheeting as per clause 6.9 of IRC 67-2010 Specification (as per MORT & Spec. No. 801) - 90 Cm Equilateral triangle (Cautionary) sign Board

Providing and fixing of Retro Reflectorised Cautionary, Mandatory Signs with Definition Plate made out of High Intensity Grade Prismatic Sheeting conforming to IRC-67:2010 & ASTM D 4956-09,Type IV Specification and Fixed over 1.5 mm thick Aluminium Sheet Fixed on back support Frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45cm x 60cm below Ground Level etc Complete including 7 years warranty for the Retro Reflective Sheeting as per clause 6.9 of IRC 67-2010 Specification (as per MORT & Spec. No. 801) 60 cm circular (Mandatory) sign Board

Providing and fixing of Retro Reflectorised Cautionary, Mandatory Signs with Definition Plate made out of High Intensity Grade Prismatic Sheeting conforming to IRC-67:2010 & ASTM D 4956-09,Type IV Specification and Fixed over 1.5 mm thick Aluminium Sheet Fixed on back support Frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45cm x 60cm below Ground Level etc Complete including 7 years warranty for the Retro Reflective Sheeting as per clause 6.9 of IRC 67-2010 Specification (as per MORT & Spec. No. 801) - Chevron signs 90 cm

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. Bituminous Surface

Reinforced cement concrete M15 grade kilometre stone/ local stone of standard design as pre IRC:8 fixing in position including painting and printing etc as per drawing and Technical Specification Clause 1703(ii) - Ordinary Kilometre stone (Precast).

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as pre IRC:8 fixing in position including painting and printing etc as per drawing and Technical Specification Clause 1703(iii) - 200 m stone (precast)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as pre IRC:8 fixing in position including painting and printing etc as per drawing and Technical Specification Clause 1703 - Guard stone (precast)

Towards the charges for routine maintenance of the road work executed under PMGSY including dressing of berms by refilling the gully with gravel, Trimming to grass, wild seasonal growth on berms, repairs to pot holes in BT surface, Maintenance of Slab type culverts by way of clearing, cleaning, erosion, repair, repairs to cracks, parapet walls, white washing guard stones, painting KM stones, parapets, refixing desplaced guard stones, caution boares, speed limit boards etc with the peiodicity for the above activiies as prescribed in IRC- SP-20-2002 and as directed by the departmental officers except for constructional defects which has to be rectified by the contractor at his own cost.

For the First Year from the date of completion of work

For the Second Year from the date of completion of work

For the Third Year from the date of completion of work

For the Fourth Year from the date of completion of work

For the Fifth Year from the date of completion of work

GST Amount for providing Service to Government Contract Work @12% of the (sum of total quoted Construction cost & total employer indicated Maintenance cost for 5 years) i.e.(12% of SUM of BA13:BA43) (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)