Jawaharlal Institute Of Postgraduate Medical Education And Research Tender

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)- 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. - Two Coats

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For Fixed Portion -Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flatpressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge- Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of ‘1.70 mm for Series Rl and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, UPVC extruded glazing beads, interlocks and lnline sash adaplor (where ever required) ol appropriate dimension, EPDM gasket, hardware, SS 304 grade fasleners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per lS 1367:Part l to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealanl over backer rod ol approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-inCharge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.CA1- Two track two panels sliding window with aluminium channel for roller track, wool, pile, nylon rollers with ss304 body. 9.147A1.2 using R3 series with frame (55mm&above)x(40mm&above) & sash (30mm&above)x(55mm&above) with zink alloy (zamak) powder coated handle on every panel along with multi point locking system ( Height up to 1.8m)

Fixed window/ Ventilator with mullion/ Transom 9.147.C2.1 - (Using R1 series with frame (33mm & above ) x(35mm & above ) & mullion ((33mm & above )x(50mm & above ). (Height up to 0.90 metre)

buy back of dismantled aluminium material from the extisting cabins as per site condition

Modifying existing 2 no. windows grill to access AC outdoor unit including painting, weilding, grinding, finsing etc and making it up same in functional with replacing damaged hinges ,bolts,accessories as reqd

Providing and fixing of Executive Table The Table Top (Not less than 8 mm glass with polished edges) & leg made of 25mm thick particle board and 0.6 mm thick flex decorative laminate finish for one side and balancing laminate on other side and edges are duly double side postformed finish and modesty panel made of 18mm thick pre laminated board with 2mm thick PVC edge beeding. all complete as directed by the Engineer‐in‐charge- of Size : 1650mm (W) x 750mm x 750 mm *H)

Providing & Fixing of Executive Cabin Half height (1200 mm (ht) modular partitions 75 mm width , and making cubicals / rooms of required size consisting powder coated aluminium extruded sections having minimum 1.2 mm wall thickness, (minimum thickness of powder coating 50 micron) including corner post (box section) and powder coating 50 micron) including corner post (box section) and necessary horizontal sections (distance between two members not more than 0.70m) and verticle sections (distance between two members not more than 0.90). The partitions shall be sturdy with flush type on both sides including fixing 9 mm thick prelaminated particle board with decorative lamination on one side and balancing lamination on other side conforming to IS: 12823 ,grade -II, type -II / 9mm thick MDF Board covered with fabric of required quality and colour/ fixing of marker board /Magnetic board all complete as directed by the Engineer-in charge

Providing and fixing of Executive Work Table of required Size with Table Top & leg made of 25mm thick particle board and 0.6 mm thick flex decorative laminate for one side and balancing laminate for top & 0.6mm thick flex decorative laminate on both side for leg with postformed edge/2mm thick PVC edge beeding on exposed surface with necessary accessories for table fixing viz G.I bracket/clamp etc all complete as directed by the Engineer-in-charge

Side table cum storage unit of Size 900mm (W) x 450mm (D) x 750mm (H) . The top made of 25mm thick postformed edge and having 2 drawer on top bottom with one shelves making two compartment with swing type shutters. The unit made of 18mm thick pre laminated particle board and 2mm thick PVC edge beeding. with necessary hardware accessories like hinges, handle etc. and lock & key arrangements all complete as directed by the Engineer‐in‐charge

Providng and fixing key boards shelf made of size 600x300mm &18mm thick MDF BOARD Prelamiated /Prelaminated particle board exterior grade including 2mm thick PVC edge banding, fixing with ball bearing type powder coated guide channels all complete as directed bythe Engineer-in-charge

BrCPU Trolley 18mm thick pre laminated particle board duly edge banded all exposed edges with Nylon castors

Foot rest of Size 450mm (W) X 300 mm (D) x 150mm (H) made out of 18mm thick pre laminated particle board duly edge banded with 2mm thick PVC edge beeding.

Nexus High Back Chair Back: Chair control, Press wood sheet, HR Foam, Polyester Fiber Sheet,Ergonomic design with high-back Cushioned chair arms for added comfort HR foam seat Polyester Fiber SheetSturdy base with height-adjustable gas lift and chair controls Caster wheels for mobility Leatherette finish Dimensions:W 66 cm x D 70 cm x H 129 c.

Empress Low Back Chair: Executive low back chair with mesh back Mesh fabric, Comfortable armrest, Solid base with casters HR foam seat for better comfort, Height-adjustable gas lift, Plastic outer cover Molded ply sheet base Castors, Chair base, Gas lifter, Chair arm, Chair control, Dimensions:W 60 cm x D 54 cm x H 108 cm

Desk - ECO Single seater (Special): 600 mm X 400 mm X 775 mm H (for classes X to above) Top, seat & backrest : 18 mm thick - PLB- edge banded with PVC strip -OSL- bavarian beech shade Frame : 25mm Sq. x 1mm thick M.S. tube - powder coated in black shade Book shelf : 1mm thick M.S sheet panel - 3 sides covered - powder coated in black shade as directed by Engineer-in-charge.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer with enamel paint all complete.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required ( Standard Make) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire( IEI)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required ( Standard Make) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire( Power Points )

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required ( Standard Make) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (A/C Wiring)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required ( Standard Make) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire ( Incoming )

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as per site condition. (Standard make) 6 Module (for Light Connection)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as per site condition. (Standard make) 8 Module (for Power Connection)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as per site condition. (Standard make) 3 Module ( Fan Connection )

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as per site condition. (Standard make) 2 module( for Lan/Telephone connection)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 1 Run

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Standard make) 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Standard make) 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Standard make) 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Standard make) 6 pin 15/16 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Standard make) Lan RJ 45 Modular Socket Outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Standard make) Telephone Socket Outlet

Supply and Drawing of 0.5mm dia FR/FRLS PVC unarmoured telephone cable in existing surface/pvc conduit as required 2 pair(Standard make)

Supply and fixing of Module Blanking plate on existing modular plate as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(Standard make) 25mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB with complete connections, testing and commissioning etc. as required.(Standard make) Single Pole 10 A

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole 16 A

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Four Pole RCCB 63 A

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 12 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.as per site condition. 63 amps

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Supply and fixing of 2x2 25 Watts, 2500Lumens 4K Daylight Square LED Recess fitting Make:Standard

Supply,installation,testing,commissining of of 75'' inch interactive flat panel type(ADS) with resolution of 3840*2160 Operating System (OS)Android 13.0,RAM 8GB,Processor: Intel Core i5 Memory:8GB Storage:SSD 256 GB,OS Compatibility:Windows 10/8/7. (Make:Standard) with All required accessories.

Supply of HDMI Cable Heavy Duty 25 Meter with high speed of 5120 Mbps , 4K resolution support

Supply and fixing of 32mm x 12.5mm approved standard make PVC cable management system including all accessories on existing wall/partition/celing etc with 85mm flexible cover as reqd trunking.as per site reqirment

Supply and fixing of 105x50mm approved standard make PVC cable management system including all accessories on existing wall/partition/celing etc with 85mm flexible cover as reqd trunking.as per site reqirment

Supply and fixing of Energy Efficient BLDC 400 mm wall mounted fan and commisioning the same as per site condition(Standard make)

Supply, installation, testing and commissioning of Air Cooled High Wall mounted Cassette type Air Conditioner (Non-inverter type) of following capacity consisting of high wall mounted type room unit (fan coil) with cordless remote control and outdoor condensing unit comprising of energy efficient suitable rotary compressor for operation on single phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation and fixing of room (fan coil) unit on wall, standard 3.5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of full electrical cabling from power plug near indoor unit and to outdoor unit, making holes on walls, plastering etc., as per site requirement, first charge refrigarant gas (R410-A/R407-C/R32), complete as required. 1.5 TR minimum 5 star rated as per BEE

Supply, installation, testing and commissioning of Air Cooled High Wall mounted Split type Air Conditioner (inverter type) of following capacity consisting of high wall mounted type room unit (fan coil) with cordless remote control and outdoor condensing unit comprising of energy efficient suitable rotary compressor for operation on single phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation and fixing of room (fan coil) unit on wall, standard 3.5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of full electrical cabling from power plug near indoor unit and to outdoor unit, making holes on walls, plastering etc., as per site requirement, first charge refrigarant gas (R410-A/R407-C/R32), complete as required. 1.0 TR minimum 5 star rated as per BEE

Providing and fixing of approved make wall mounted stabilizer for Air Conditioner of following capacities: 4kVA

Supply, Installation, testing and commissioning of 25mm dia upvc drain piping for AC unit system, complete with fittings, with suitable adjustable ring type hanger supports/wall clamping, jointing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of required thick and size all accessories as per specifications etc. as required.

Supply, installation, testing and commissioning of suitable soft drawn copper refrigerant piping additional length for 1.5TR,1 TR units with nitrile rubber insulation & suitable size electrical cabing interconnecting the condensing unit to evaporating unit for split units as per site condition.

Supply and fixing of 16 port Ethernet switch speed 10/100 MBPS and commisioning of same with reqd accessories as per site condition (Standard make)

Removing of existing Fan Coils in the Room

Removing and refixing( if required) of existing switch /sockets /lights/ and refixng to new location as per site condition(surface/ concealed/cabin fixing) and as per the instruction of Engineer In Charge

Removing of existing fire sprinklers and smoke detectors in Old false ceilingand Refixing and Re-Commissioning on the new false ceiling as per site condition and as per the instruction of Engineer In Charge

Providing and fixing of MS stand for Split/Cassette Air Conditioner upto 1.5 TR or 1 TR capacities. With suitable bolt,nut,making holes,clamps and plastering the same as per site condition