Engineering Projects India Limited Tender
View complete overview of Puducherry Engineering Projects India Limited Tender
Engineering Projects India Limited Tender
Civil And Construction
Electronics Equipment
Building Construction
Electrical and Electronics
Eprocure
Opening Date29 Oct 2024
Closing Soon19 Nov 2024
Tender AmountRefer Documents
Costs
EMD
₹ 28,72,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EPI_212980_1Tender No
EPI/CO/CON/948/864Tender Authority
Engineering Projects India Limited ViewPurchaser Address
-Website
http://www.mstcindia.co.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of Station New Building with Air Concourse CIVIL, ELECTRICALand PLUMBING for Major Upgradation and Redevelopment of Pondicherry Railway Station, Puducherry
BOQ Items
800 mm Dia
1665.6
-
-
1000 mm Dia
112
-
-
Steel Reinforcement for RCC work including straightening , cutting, bending and placing in position and binding all complete.
Thermo-Mechanically Treated Bars of grade Fe-500D or more.
129932.16
-
-
SUB HEAD II - EARTH WORKS
-
-
-
Earthwork in excavation by mechanical means (Hydralic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, As directed by Engineer -in-Charge.
All Kinds of Soils
820.46
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
425.52
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
All kinds of soil
100
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
264.52
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
3085.46
-
-
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge.
193.71
-
-
SUB HEAD III - CONCERETE WORKS
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size)
254.87
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
87.3
-
-
SUB HEAD -IV RENFORCED CEMENT CONCERETE WORKS
-
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
All works up to plinth level
-
-
-
Pile cap - Concrete of M30 grade with minimum cement
content of 350 kg /cum
151.77
-
-
Grade Beam - Concrete of M30 grade with minimum cement content of 350 kg /cum
95.87
-
-
Column - Concrete of M30 grade with minimum cement content of 350 kg /cum
33.67
-
-
All works above plinth level upto floor V level
-
-
-
Column - Concrete of M30 grade with minimum cement content of 350 kg /cum
109.32
-
-
Roof Beam - Concrete of M30 grade with minimum cement content of 350 kg /cum
563.49
-
-
Slabs -Concrete of M30 grade with minimum cement content of 350 kg /cum
828.24
-
-
RCC Staircase -Concrete of M30 grade with minimum cement content of 350 kg /cum
29.82
-
-
Lintel BEAMS - Concrete of M25 grade with minimum cement content of 330 kg /cum
13.35
-
-
REINFORCEMENT: Steel Reinforcement for RCC work including straightening , cutting, bending and placing in position and binding all complete.
Thermo-Mechanically Treated Bars of grade Fe-500D or more.
-
-
-
Upto Plinth level
36446.94
-
-
Above Plinth LEVEL
198006.89
-
-
FORMWORK: Centering and shuttering including strutting, propping etc. and removalof form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
536.58
-
-
Suspended floors, roofs, landings, balconies and access
platform
4786.25
-
-
Lintels, beams, plinth beams, girders, bressumers and
cantilevers
667.85
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
4717.51
-
-
Stairs, (excluding landings) except spiral-staircases
148.04
-
-
SUB HEAD V - MASONRY WORKS
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:6 (1 cement : 6 coarse sand)
39.21
-
-
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge.
971.62
-
-
Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2
281.02
-
-
SUB HEAD VI- CLADDING WORKS
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels
Granite stone slab colour black, Cherry/Ruby red
Area of slab over 0.50 sqm
687.89
-
-
SUB HEAD VII -WOOD AND PVC WORKS
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length
Salwood
2.73
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
60.06
-
-
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws ( Laminated FLUSH Doors )
141.75
-
-
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.
29
-
-
Providing and fixing aluminium sliding door bolts ISI marked anodised (Anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc., complete:
250 mm X 26 mm
74
-
-
Providing and fixing Aluminium Tower Bolts, ISI marked, Anodised (Anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc., complete:
-
-
-
200 mm X 10 mm
74
-
-
150 mm X 10 mm
74
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc., complete:
125 mm
148
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked anodised (Anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc., complete: - Twin Rubber Stopper
29
-
-
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/cum. The frame will have a provision of G.I. anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge . (Cost of SS ball bearing hinges is excluded).
145.44
-
-
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes fire rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled mineral wool insulation having density minimum 96 kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for seperately).
31.68
-
-
SUB HEAD VIII- STEEL WORKS
-
-
-
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ( MS GRILLS FOR WINDOWS )
1738.76
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
80x1.25 mm M.S. laths with 1.25 mm thick top co
284.47
-
-
SUB HEAD IX - FLOORING
-
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
163.71
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 40 mm thick stone slab over 25 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent (18 MM )
2846.92
-
-
Extra for using 40mm thick polished granite instead of 18mm thick
2846.92
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
1763.96
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
25 mm Thick
2038.55
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm
1156.97
-
-
Providing and laying vitrified floor tiles (Toilet Spaces ) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete
Size of Tile 600x600 mm
1176.79
-
-
SUB HEAD X - ROOFING WORKS
-
-
-
Providing and laying lime concrete terracing on roofs average thickness 10 cm laid to slope with 25mm nominal size brick aggregate and 50% lime mortar (1:2) (1 lime putty : 2 surkhi) rammed and finished with Kakkukkai soaked in water and jaggery, beating with mallets and such other compacting treatments complete, including rounding off junctions with parapet wall complete.
197.37
-
-
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1.00 mm thick with zinc coating not less than 275 gm/m²
1914.95
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
20
-
-
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
1973.68
-
-
Providing and laying roof insulation with 60 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge.
1762.56
-
-
Powder Coated Metallic Open Cell -Providing and Fixing of METALIUMTM Make Open Cell Ceiling 200*200*48*10 Size Galvanized Steel 0.4mm TCT Plain Powder Coated Cell With 15mm Galvanized Steel Tee Grid In The Same Color As Cell & with other accessories Metal False Ceiling System.
870.76
-
-
Metallic Open Cell & Gypsum Board Ceiling - Providing and Fixing Combination of METALIUMTM Make Open Cell Ceiling 200*200*48*10 Size Galvanized Steel 0.4mm TCT Plain Powder Coated Cell With 15mm Galvanized Steel Tee Grid In The Same Color As Cell & Gypsum false ceiling tiles of Size 595x595 & with other accessories False Ceiling System.
1257.16
-
-
Metal Perforated Plain Galvanised Tiles in white with silhouette grid system in cobination of water proof system - Providing and fixing of METALIUMTM make Lay-in-tile 585*585mm Galvanized Steel 0.5mm TCT Perforated 2.5mm Dia Coil Coated Square Edge panel back side non-woven cloth with 15mm Tee Grid and back side other framing accessories Metal False Ceiling System.
248.13
-
-
Metal Perforated Plain Galvanised Tiles in white with silhouette grid system - Providing &Fixing of Perforated metal ceiling System consisting of 600x600mm Lay in tiles of pre coated galvanised steel in 0.4/0.5 mm thickness in white/ other colour with Siloute - section colour white having rotary stitching on the Runner, 600 mm & 600 mm Cross Sections . as instucted at site etc complete warrantee. The grid should be of “Armstrong” make with 24mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm and a load carrying capacity of 23.71 Kgs/M2. The T Sections have a Galvanizing of 120 grams per M2 & passed through 500 hrs of Salt test
400.85
-
-
Metal Perforated Plain Galvanised Tiles-Providing &Fixing of Perforated metal ceiling System consisting of 600x600mm Lay in tiles of pre coated galvanised steel in 0.4/0.5 mm thickness in white/ other colour with Siloute - section colour white having rotary stitching on the Runner, 600 mm & 600 mm Cross Sections . as instucted at site etc complete warrantee. The grid should be of “Armstrong” make with 24mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm and a load carrying capacity of 23.71 Kgs/M2. The T Sections have a Galvanizing of 120 grams per M2 & passed through 500 hrs of Salt test
61.38
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011
1634.37
-
-
Providing & fixing of Flux polycarbonate roof with multilayer standing seam polycarbonate panel system Of 25 mm thickness (minimum) including all standard fixing accessories on top of the supporting structure (Paid extra in another item) complete &as per the direction of the engineer in charge. The Panels shall include opaque and translucent combination Of louvers integrated in the panel for Angular Daylighting and, for better thermal insulations and diffusion of light especially with combination designed for tropical regions & shading throughout the day for better ambient temperature below the roof. Panels shall be manufactured with vertical standing seam at both sides Of the panel. Panels have to be fixed on Purlin with snap on connectors with grip lock double tooth locking mechanism and will be secured on MS structure / purlins (will be paid Separately) with HDSS Fastener and double tooth polycarbonate connector for best stability and having a pulk»ut load of min,7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005.Panels shall have minimum seven layers with all fixing accessories to ensure best performance for wind uplift. vibration,oil canning and visual appearance. Performance Panels cell structure be in truss bridge design or commonly called X structure for better strength and stability. The entire panel system shall be with a width from min. 1200 mm, Bigger width and minimal junctions should be preferred for better Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign Of breakage on Polycarbonate panel which have been exposed to UV for a min. Of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV' for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:201 Panel shall be with additional End cap/Aluminium UIF profile/ Glazing Bar (all mill finish) for ends as required. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge.
1498
-
-
SUB HEAD XI - FINISHING
-
-
-
12 mm cement plaster (internal) of mix complete in all respect with all cost ,labour, T & P, Taxes etc as per direction of the Engineer - in - charge.
1:4 (1 cement: 4 coarse sand)
10899.97
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
4193.49
-
-
6 mm cement plaster of mix :complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.
1:3 (1 cement : 3 fine sand)
4881.28
-
-
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
1490.68
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
2601.16
-
-
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
11001.62
-
-
ii) On ceilings
4881.28
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
4213.93
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
372.83
-
-
Providing and applying two coats of fire retardant paint on cleaned wall surface as per the manufacturer specification including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.
10847.23
-
-
SUB HEAD - XII ALUMINIUM WORKS
-
-
-
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.
322.74
-
-
Providing, installation, Testing & Commissioning of Bi-Parting Automatic Sliding Door Operator complete with a pair of bi-parting doors and two fixed side screens. The door is activated by radar units mounted either side of the threshold. Side screen safety is provided by presence sensors mounted above the door run back area. All operating and safety accessories shall be supplied by Electro Automation as part of this contract. The screen and doors shall be manufactured from proprietary Aluminium sections, single glazed with 12mm laminated safety glass. The overall screen size shall be as per the drawings and existing color, Measurements must be verified on site and shall be the contractor’s responsibility. The detail specification is as per attached.
43.2
-
-
SUB HEAD - XIII WATER PROOFING WORKS
-
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
1973.68
-
-
Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
1973.68
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
202.21
-
-
SUB HEAD - XIV MISCELLANEOUS
-
-
-
Supplying and fixing Stainless Steel stair railing and railing for corridors, Vertical height of railing 890 mm from the centre of the Step tread , 38 mm dia vertical Balustaers,, 50 mm dia top rail and 3 nos. 19 mm dia horizontal pipe running continuously fixed at regular interval with base plate , cover plate , necessary bolts including all accessories for installation complete. stainless Steel will be 304 grade and Balustade will be mat finish positioned 500 mm centre to centre distance . The job will be executed as per direction of Engineer-In-Charge and the design of railing will be as per sketch attached. (The measurement will be made in running metres of 50 mm dia pipe including 50 mm dia starter pipe as and where installed.)
398.09
-
-
Design, Supply, Fabrication and installation of Glass Railings Systems (H 1200 mm) as per approved drawings complete using SS 304 Top handrail 65mm dia, anchor bracket Alum. U Channel / mechanism including Cover Profile & Silicon Grip as mentioned below with all necessary hardwares along with 10 mm thk toughened Glass as per specifications etc including providing all fixing arrangement and fixing of all accessories as per manufactures standard, and instruction as per instruction of engineer incharge.
30
-
-
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
467.97
-
-
Supply and Fixing of Semi unitized curtain wall glazing system powder coated aluminum frames as per design and glass panels of double insulated Glass /DGU (Conforming to GRIHA standards - minimum 3 star) and Powder Coated Aluminum Louvers as per architectural drawings and inner walls painted with premium acrylic emulsion pain finish. And on steel Columns white color fluted WPC panels and wooden texture
1031.36
-
-
GFRC cladding works for elevation treatment including providing necessary cornices,Grove Liines,Buttens and Architechtural motifs,Butters Treatments,Decorative Treatments in the columns like,Flutes,Etc, All Complete as per EIC,. And Detailed Drawings.
841.85
-
-
Providing and fixing panelling on wall & ceilings with WPC (Wood Polymer Composite) Fluted Panels of size 2950MM (LENGTH)X 195MM (WIDTH) X 27MM(HEIGHT) of LEBEN/ Alutuff / Murrato or other approved make of approved shade in approved pattern as directed by the architect. Rates shall be inclusive of all hardware fittings sna fixtures as required to fix the same on the wall and ceilings including corner beading and fastners.
281.77
-
-
Water Tanks - As per approved specification and drawing.
34.6
-
-
Ticket Dispencer - As per approved specification and drawing.
2
-
-
Steel Seated Perfoarated Metal Bench - As per approved specification and drawing.
-
-
-
Three Seated
140
-
-
Two Seated
100
-
-
Square Table With ( 4 Seated ) - As per approved specification and drawing.
23
-
-
SUB HEAD - XV UTILITY SHIFTING /RELOCATING /DISMANDLING AND DEMOLISHING
-
-
-
Demolition / Dismantling & Shifting of Utilitiy services (Civil, PHE and E&M services) as per Scope of work, Design Basis Report, Technical Specifications, Drawings etc., complete at Puducherry Railway Station, Puducherry. Demolition / Dismantling of Civil structure/Building incl. foundation & Shifting Utility services
1758
-
-
Taking down / Removing & Stacking useful Civil materials like doors, Windows, Fittings & fixtures etc.,
1758
-
-
Taking down / Removing & Stacking useful MEP materials like Fittings & fixtures etc.,
1758
-
-
On completion of Shifting the debris /unwanted material off the site
1758
-
-
Site Cleaning / Clearing incl. making leveling the ground if any
1758
-
-
Completion & Shifting of materials to Railway yard, Handing over the useful material
1758
-
-
SUB HEAD - XVI PLUMBING & SANITARY
-
-
-
Sanitary Fixtures
-
-
-
Supply ,Installing, testing and commissioning of White color floor mounted European water closet with flush tank with necessary pan connecter, bend, checknut, angle cock, solid seat cover with polythene buffer and flap, CP flanges etc.... Cost including conveyance of all materials to the site, all labour charges, all taxes etc., complete. complete in all floors including cutting and making rough finishing the walls and floors wherever required, checked and directed by the site engineer. complete. All items like wall brackets, bolts washers, screws & brackets to be painted with two coats of enamel paint of approved shade over a coat of primer and necessary screws, etc. Complete. Works including cutting and making rough finishing the walls and floors wherever required, checked by the site engineer. All works done as per the drawing, as directed by site engineers.(All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
42
-
-
Supply, Installing, testing and commissioning of under counter wash basin, 15mm dia manual type Pillar cock 2nos / sensor type pillar cock 1nos (Necessary solenoid valve (electrically operated) activated by infrared sensor) with waste coupling, 32mm dia CP bottle trap with extension pipe, supporting bracket with necessary steel to support basin 1 No.15mm CP angle valve with 450mm long CP connection pipe and CP wall flanges all of approved make etc.,(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete. All items like wall brackets, bolts washers, screws & brackets to be painted with two coats of enamel paint of approved shade over a coat of primer and necessary screws, etc. Complete. Cost including conveyance of all materials to the site, all labour charges, all taxes etc., complete. Works including necessary cutting and making finishing the wall and floors wherever required etc. complete. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
39
-
-
Supply, Installing, testing and commissioning of wall hung wash basin, 15mm dia manual type Pillar cock 2nos / sensor type pillar cock 1nos (Necessary solenoid valve (electrically operated) activated by infrared sensor) with waste coupling, 32mm dia CP bottle trap with extension pipe, supporting bracket with necessary steel to support basin 1 No.15mm CP angle valve with 450mm long CP connection pipe and CP wall flanges all of approved make etc.,(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete. All items like wall brackets, bolts washers, screws & brackets to be painted with two coats of enamel paint of approved shade over a coat of primer and necessary screws, etc. Complete. Cost including conveyance of all materials to the site, all labour charges, all taxes etc., complete. Works including necessary cutting and making finishing the wall and floors wherever required etc. complete. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
7
-
-
Supply, Installing, testing and commissioning of CP / stainless steel handicapped toilet Grab bar of approved make etc.,(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning ) complete.(All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
8
-
-
Supply, Installing, testing and commissioning of 15mm CP health faucet of approved make with necessary CP flexible hose 1000mm long nozzle wall flange, CP angle cock etc., (The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning ) (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines)
42
-
-
Supplying, installing, testing and commissioning White Vitreous large flat back with flush valve supported by CI/GI bracket duly painted, including 15mm dia diameter spreader, 32mm diameter CP dome waste, 32mm diameter CP P-trap with unions, CP wall flange and pipe and CP pipe manifolds for auto flushing (Urinal flushing shall be through an auto flush valve with electrically operated solenoid valve activated by infra-red sensor) systems for urinal to ensure flushing only immediately after use, comprising of all plumbing, Including necessary wall cutting/chasing and making good, as required. Works including cutting and making rough finishing the walls and floors wherever required, checked by the site engineer. All works done as per the drawing, as directed by site engineers. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
14
-
-
Supply, Fixing & testing of curved shaped urinal partition with white marble 25mm thick, 1050 x 600mm size fixed in wall including providing & fixing concealed CI bracket, cutting and making good. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
10
-
-
Supply, Installing, testing and commissioning of approved make (vertical / horizontal) type Electric water heater with heating elements with thermostat,2Nos.15mm dia. CPangle valve, pressure relief valve,non-return valve with CP copper connecting pipes with wall flanges etc., complete (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
-
-
-
Capacity : 5 Lts.
1
-
-
Capacity : 15 Lts.
16
-
-
Supply, Installing, testing and commissioning of Stainless sink single bowl with drainboard manufactured from 1mm thick stainless steel, 18G high grade indestructible chrome nickel steel with top quality polish,1no.40mmdia CP waste coupling, Sink cock / sink mixer with wall flange with aerator etc., complete. All items like wall brackets, bolts washers, screws & brackets to be painted with two coats of enamel paint of approved shade over a coat of primer and necessary screws, etc. Complete. Cost including conveyance of all materials to the site, all labour charges, all taxes etc., complete. Works including necessary cutting and making finishing the wall and floors wherever required etc. complete. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
1
-
-
Supplying, Fixing of white CP toilet paper holder fixed with SS screws complete. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
42
-
-
Supplying, Fixing of CP twin coat hook fixed with SS screws on to the toilet door. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
42
-
-
Supply and fixing of Hand drier of approved make and colour having twin blower integrated with timer cum infrared sensing system fully automatic which can work on 230 volts, single phase, 50 cycles etc., complete. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
17
-
-
Supplying,installing, testing and commissioning of 600mm long CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arangement of approved quality colour and make. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
16
-
-
Supplying, installing, testing and fixing of stainless steel body paper towel dispenser with SS screws on the toilet wall. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
17
-
-
Supplying,installing, testing and commissioning of wall mounted liquid soap container of approved make near wash basins & sink with necessary fixing screws and clamps etc., complete. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
18
-
-
Supplying,installing, testing and commissioning of CP Towel Ring fixing with necessary screws etc., complete (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
5
-
-
Supplying installing testing and commissioning of hot and cold CP shower unit with wall mixture unit with provision for over head shower, 15mm dia. CP elbow coupling pipe, spout and over head shower comprising of CP shower arm, pressure adjustable shower rose with cp wall flange etc., complete. (All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
16
-
-
Supplying, Installing, testing and commissioning of 15 mm dia CP Bib cocks (The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning)complete. Works including cutting and making rough finishing the walls and floors wherever required, checked by the site engineer. All works done as per the drawing, as directed by site engineers.(All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
7
-
-
Supplying, Installing, testing and commissioning of 15 mm dia CP Angle cocks (The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning)complete. Works including cutting and making rough finishing the walls and floors wherever required, checked by the site engineer. All works done as per the drawing, as directed by site engineers.(All sanitray fixtures, fittings shall be low flow type as per GRIHA guidelines & outline construction specifications (OCS) )
7
-
-
Supplying, installing, testing and Fixing of Soap dish with necessary SS Screws, etc., complete
16
-
-
INTERNAL SOIL AND WASTE WATER SYSTEM
-
-
-
Supply and fixing , Testing and Commissioning of Centrifugally Cast Iron Pipes and Fittings confirming to IS 3989 as per OCS guideline for soil & waste pipes inclusive of all necessary specials like bends, tees, offsets, junctions, pan connector, cowls etc., laid under floor / under ceiling / on walls with suitable clamps including making bores in masonry etc., and rendering the bores in cement mortar after laying the pipes and specials curing etc., complete. The quoted rate should include necessary supports like hanger supports, grip bolts and clamps etc.,. Fixing of universal clamp for hanging pipeline is done at no extra cost and is included in the cost of installation of piping.(Brand & Specifications as per Design ) (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
40mm dia - GI 'B' Glass
110
-
-
50mm dia - GI 'B' Glass
45
-
-
75mm dia
505
-
-
110mm dia
345
-
-
150mm dia
5
-
-
Supply and fixing , Testing and Commissioning of Type - B SWR PVC pipe confirming to IS 13592 soil & waste pipes jointed with solvent cement of good quality lubricant inclusive of all necessary specials like bends, tees, offsets, junctions, pan connector, cowls, Rodding eye at 15 Mtr Interval etc., laid under floor / under ceiling / on walls with suitable clamps including making bores in masonry etc., and rendering the bores in cement mortar after laying the pipes and specials curing etc., complete. The quoted rate should include necessary supports like hanger supports, grip bolts and clamps etc.,. Fixing of universal clamp for hanging pipeline is done at no extra cost and is included in the cost of installation of piping.(Brand & Specifications as per Design ) (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
75mm dia
5
-
-
110mm dia
5
-
-
160mm dia
5
-
-
200mm dia
5
-
-
Supply and fixing , Testing and Commissioning of PVC pressure pipes Class-III (10Kg/sqcm) confirming to IS-4985 soil & waste pipes jointed with solvent cement of good quality lubricant inclusive of all necessary specials like bends, tees, offsets, junctions, pan connector, etc., laid under floor / under ceiling / on walls with suitable clamps including making bores in masonry etc., and rendering the bores in cement mortar after laying the pipes and specials curing etc., complete. The quoted rate should include necessary supports like hanger supports, grip bolts and clamps etc.,. Fixing of universal clamp for hanging pipeline is done at no extra cost and is included in the cost of installation of piping.(Brand & Specifications as per Design ) ( For Wash Basins, Urinals, sinks etc...)(Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
32mm dia
5
-
-
40mm dia
5
-
-
50mm dia
5
-
-
Supply and fixing of PVC self cleansing, deep seal type 110 mm dia Floor trap with cockroach trap of size 150mm x 150mm, complete as per specifications and 75mm outlet with necessary cement concrete, water proofing the internal surfaces of chamber etc., complete as per specifications. depth of trap shall not be less than 125mm.Water seal :50mm min(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) (For Closet and Janitor area ) (Pipes and fittings shall be as per outline construction specifications (OCS) )
1
-
-
Supply and fixing of PVC self cleaning, deep seal type 110 mm dia Multi Floor trap with cockroach trap of size 150mm x 150mm, complete as per specifications and 75mm outlet with necessary cement concrete, water proofing the internal surfaces of chamber etc., complete as per specifications. depth of trap shall not be less than 125mm.Water seal :50mm min(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete. (For Wash basins) (Pipes and fittings shall be as per outline construction specifications (OCS) )
1
-
-
Supplying, fixing and testing 75 dia PVC 'P' trap for urinals with cockroach trap of size 150mm x 150mm, complete as per specifications, boss connection suitable as per piping detail with fixed in bed of cement concrete. etc., or laid under floor / under ceiling / on walls with suitable clamps including making bores in masonry etc., and rendering the bores in cement mortar after laying the pipes and specials curing etc., complete. (For Urinal) (Pipes and fittings shall be as per outline construction specifications (OCS) )
1
-
-
Making Core Cutting in slabs / beams / retaining walls and any other RCC members to any dia & depth by using 'HILTI' make diamond drilling machine with tolerance for any type of inserts, anchor fasteners etc. Rate shall include for sealing the gaps between RCC surface and inserts with grouting material Conbexxtra GP2 as per manufactures specification, all charge, preparation of surface, cutting of reinforcement, cleaning the surface, staging, scaffolding with necessary tools and equipment's water and power, removal of debris from the site, staging scaffolding etc complete, as directed. (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
50mm Dia
1
-
-
100mm Dia
1
-
-
150mm Dia
11
-
-
Supply and fixing of Cast Iron self cleasing, deep seal type 100 mm dia Floor trap (heavy quality hopper type) and 75mm outlet with necessary cement concrete, water proofing the internal surfaces of chamber etc., complete as per specifications. depth of trap shall not be less than 125mm.(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete (Pipes and fittings shall be as per outline construction specifications (OCS) )
1
-
-
Supply and fixing of Cast Iron self cleasing, deep seal type 100 mm dia Multi Floor trap (heavy quality hopper type) and 75mm outlet with necessary cement concrete, water proofing the internal surfaces of chamber etc., complete as per specifications. depth of trap shall not be less than 125mm.(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete (Pipes and fittings shall be as per outline construction specifications (OCS) )) For Wash basin & Sink
31
-
-
Supply and fixing of Cast Iron self cleasing, deep seal type 100 mm dia P trap (heavy quality hopper type) and 75mm outlet with necessary cement concrete, water proofing the internal surfaces of chamber etc., complete as per specifications. depth of trap shall not be less than 125mm.(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete (Pipes and fittings shall be as per outline construction specifications (OCS) ) For Closet, Shower, Janitor and Other areas.
51
-
-
Supply and fixing of Cast Iron self cleasing, deep seal type 150 mm dia P trap (heavy quality hopper type) and 100mm outlet with necessary cement concrete, water proofing the internal surfaces of chamber etc., complete as per specifications. depth of trap shall not be less than 125mm.(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete (Pipes and fittings shall be as per outline construction specifications (OCS) ) For Urinals
6
-
-
Supplying and fixing Hot dipped Galvanised angle, Channel ,etc.. as required for supporting sewerage water supply pipes with suitable anchor bolts, bolts, nuts and washers etc., complete. For Shaft Pipe Supports
250
-
-
INTERNAL WATER SUPPLY
-
-
-
Supply, installation and testing of Medium quality ('B' Class) GI pipes as per IS: 1239 with malleable 'New' brand specials such as tees, elbows, checknuts, unions, bushes, flanges, etc., including threading, cutting and fixing in/on walls under ceiling, on terrace, etc.,Holdtite or an equivalent jointing compound shall be used for jointing the pipes. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. The Buried pipes shall be painted with two quotes of approved bituminous paint over which 4mm thick pipe protective insulation tape (Pipe Kote) of minimum 15% overlap shall be provided. The toilet concealed GI pipes shall be painted with two quotes of approved bituminous paint over which pipe protective PVC insulation tape (Tapex) of minimum 15% overlap shall be provided. The exposed pipes shall be given two coats of enamel paint over a coat of zinc chromate primer (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
15mm Dia
5
-
-
20mm Dia
885
-
-
25mm Dia
117
-
-
32mm Dia
75
-
-
40mm Dia
35
-
-
50mm Dia
5
-
-
Supply, installation and testing of Medium quality ('B' Class) GI pipes as per IS: 1239 with malleable 'New' brand specials such as tees, elbows, checknuts, unions, bushes, flanges, etc., including threading, cutting and fixing in/on walls under ceiling, on terrace, etc.,Holdtite or an equivalent jointing compound shall be used for jointing the pipes. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. The Buried pipes shall be painted with two quotes of approved bituminous paint over which 4mm thick pipe protective insulation tape (Pipe Kote) of minimum 15% overlap shall be provided. The toilet concealed GI pipes shall be painted with two quotes of approved bituminous paint over which pipe protective PVC insulation tape (Tapex) of minimum 15% overlap shall be provided. The exposed pipes shall be given two coats of enamel paint over a coat of zinc chromate primer ( For Shaft, Above ceiling and terrace ) (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
15mm Dia
5
-
-
20mm Dia
65
-
-
25mm Dia
60
-
-
32mm Dia
50
-
-
40mm Dia
60
-
-
50mm Dia
70
-
-
65mm Dia
10
-
-
80mm Dia
5
-
-
Supply, fixing, testing and commissioning of CPVC SDR-11 pipes conforming to IS.15778.2007 and fittings SDR 11 conforming to IS.15778.2007. The scope of including, cutting, cleaning and fixing in/on walls under ceiling, on terrace, etc.,. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. Support: G.I Anchor fastener, G.I threaded rod, rubber lined split clamps as suitable pipe size and G.I 'U' bolts with nut and washer. Anchor fastener shall be selected for a cracked conditions. Split clamps shall be used in the horizontal running pipe and rigid support shall be provided with G.I channel at every 4.0ft intervals and every change of directions. Doing disinfection for all the main pipes and providing ID labels for all the plumbing services. (Internal Concealed piping) Pipes which are exposed to be provided with identification labels, flow direction, etc. Hydraulic pressure test (test pressure shall be 1.5 times of working pressure). (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
15mm Dia
5
-
-
20mm Dia
25
-
-
25mm Dia
25
-
-
32mm Dia
25
-
-
40mm Dia
25
-
-
50mm Dia
25
-
-
Supply, installation and testing of rigid PVC SCH 40 pipes conforming to ASTM D 1785 and fittings of ASTM D 2467 at 300 psi to 150 psi working pressure. The scope of including, cutting, cleaning and fixing in/on walls under ceiling, on terrace, etc.,. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. Support: G.I Anchor fastener, G.I threaded rod, rubber lined split clamps as suitable pipe size and G.I 'U' bolts with nut and washer. Anchor fastener shall be selected for a cracked conditions. Split clamps shall be used in the horizontal running pipe and rigid support shall be provided with G.I channel at every 4.0ft intervals and every change of directions. Doing disinfection for all the main pipes and providing ID labels for all the plumbing services. Pipes which are exposed to be provided with identification labels, flow direction, etc. Hydraulic pressure test (test pressure shall be 1.5 times of working pressure). For shaft and terrace (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
15mm Dia
5
-
-
20mm Dia
25
-
-
25mm Dia
20
-
-
32mm Dia
15
-
-
40mm Dia
20
-
-
50mm Dia
25
-
-
65mm Dia
25
-
-
80mm Dia
20
-
-
Supply, installation & commisioning of hot water pipe 19mm thick closed cell nitrle rubber insulation (class-O)
-
-
-
15mm Dia
2
-
-
20mm Dia
125
-
-
25mm Dia
5
-
-
32mm Dia
5
-
-
40mm Dia
2
-
-
50mm Dia
2
-
-
Supply, fixing, testing and commissioning of lever operated PN-16 Grade ball valve of approved make confirming to EN-ISO 9001. The valve shall be fixed after the union. The quoted rate shall also include the cost of the union, valve tags etc., complete. Ball valve shall be with Full port, Forged and sand plastered Brass body,PTFC (Polytetrafluoroethylene) seat and Stem seals: EPDM with WRAS approved 'O' ring (Valves shall be as per outline construction specifications (OCS) )
-
-
-
15mm Dia
5
-
-
20mm Dia
33
-
-
25mm Dia
20
-
-
32mm Dia
14
-
-
40mm Dia
9
-
-
50mm Dia
8
-
-
Supply, fixing, testing and commissioning of Air release valves confirming to IS standard 13039 with necessary flanges, nuts and bolts etc., Air release valve consists of a brass body construction with male NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug, and automatic vent. Maximum Pressure: 150psi (10 bar) ,Temperature Range: 33°F – 240°F (5°C – 116°C)(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning.) complete. (Valves shall be as per outline construction specifications (OCS) )
-
-
-
20mm Dia
13
-
-
25mm Dia
2
-
-
Supply, fixing, testing and commissioning of CI body slim seal butterfly valves, shaft: AISI 410, disc: SG Iron, seat: EPDM with ISI marked of approved make as per detailed specifications complete with vertical/horizontal liver operated unit with handle, companion flanges, gaskets, nuts and bolts etc., complete confirming to IS: 13095. The valve shall be suitable for a working pressure of 16.0 kg/sqcm. (Valves shall be as per outline construction specifications (OCS) )
-
-
-
50mm Dia
1
-
-
65mm Dia
3
-
-
80mm Dia
1
-
-
Supply, installation, testing and commissioning approved make CI body non return valve (Dual Plate check valve) conforming to IS: 5312 with necessary companion flanges, neoprene gaskets nuts and bolts including all the accessories to complete the work as per the specifications. PN-16, with screwed end, catridge to be POM (Polyoxymethylene), NBR seat, spring-AISI 302 suitable for mounting in horizontal & vertical pipe (Valves shall be as per outline construction specifications (OCS) )
-
-
-
50mm Dia
1
-
-
65mm Dia
1
-
-
80mm Dia
1
-
-
Supply, installation, testing and commissioning approved make PN-16 CI Y-type Strainer with SS-304 screen suitable for mounting in horizontal & vertical pipe conforming to IS standard with necessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts including all the accessories to complete the work as per the specifications. Valve tags to be provided.(Valves shall be as per outline construction specifications (OCS) )
-
-
-
50mm Dia
1
-
-
65mm Dia
2
-
-
80mm Dia
1
-
-
Supplying, installing and testing approved make stainless steel Portable RO unit with storage and cooler. 1. Storage tank capacity ( Normal water - 20 Litres, Cold Water - 20 Litres and Hot water - 4 Litres), 2. No of Faucets - 3.0 Nos, 3. Heater power - 100 watts, 4. Housing and storage tanks shall be SS 304 and 0.8 mm the 5. Purification Method - Pre Filter + RO + UV + Ozone 6. Cold water tank insulation - PUF / EPE 7. Compressor Refrigerant - R-134a 8. PCB - Micro Controlled Based and 9. Faucet - 3 Nos (Manual)
50LPH
6
-
-
Supply, Installation, Testing, Commissioning and handing over of automatic tank level controller comprising of the following: Level Control with Motorised valves comprising of following: As per outline construction specifications (OCS)
-
-
-
Magnetic ball float type Level sensor for tank - High Level & Low level - 1 set. valve actuator, suitable for the following ball / butterfly valve. The mechanism shall be of tight shut-off type. - 1 set. butterfly / ball valve, with suitable adaptor for the above valve actuator - 1 no. Wiring with 2C x 2.5 sqmm copper wires in 20-mm GI conduits interconnecting the level sensor and the valve actuator - Assume 20 RMT. Power transformer, if necessary for supplying power to the valve actuator from field available power supply of 230V, 1Ph., 50hz, complete with powder coated, weather proof mounting box, incoming 5A MCB, etc., complete.- 1 set.
With 50-mm Ball Valve
4
-
-
RAIN WATER DOWNTAKE SYSTEM
-
-
-
Supply, installation and testing of Medium quality ('B' Class) GI pipes as per IS: 1239 with malleable 'New' brand specials such as tees, elbows, checknuts, unions, bushes, flanges, etc., including threading, cutting and fixing in/on walls under ceiling, on terrace, etc.,Holdtite or an equivalent jointing compound shall be used for jointing the pipes. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. The Buried pipes shall be painted with two quotes of approved bituminous paint over which 4mm thick pipe protective insulation tape (Pipe Kote) of minimum 15% overlap shall be provided. The exposed pipes shall be given two coats of enamel paint over a coat of zinc chromate primer (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
75mm dia
10
-
-
100mm dia
15
-
-
150mm dia
70
-
-
200mm dia
35
-
-
Supply and fixing , Testing and Commissioning of Centrifugally Cast IronPipes and Fittings confirming to IS 3989 for soil & waste pipes inclusive of all necessary specials like bends, tees, offsets, junctions, pan connector, cowls etc., laid under floor / under ceiling / on walls with suitable clamps including making bores in masonry etc., and rendering the bores in cement mortar after laying the pipes and specials curing etc., complete. The quoted rate should include necessary supports like hanger supports, grip bolts and clamps etc.,. Fixing of universal clamp for hanging pipeline is done at no extra cost and is included in the cost of installation of piping.(Brand & Specifications as per Design ) (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
75mm dia
5
-
-
100mm dia
5
-
-
150mm dia
5
-
-
200mm dia
5
-
-
Supply, installation, testing and commissioning of CI Khurra with CI Grating - L type with necessary accessories to complete the work including threading, cutting and fixing in/on walls under ceiling, on terrace, etc.,. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
75 mm dia
2
-
-
100mm dia
3
-
-
150mm dia
5
-
-
200 mm dia
2
-
-
Supplying, fixing, testing and commissioning of approved PVC welded rain water head /kurras parapet type grating with puddle flange to fix in RCC slab of terrace or toilet areas specially fabricated from minimum 4mm thick PVC sheet, including removable heavy duty PVC grating. Rate includes necessary accessories to complete the work including threading, cutting and fixing in/on walls under ceiling, on terrace, etc.,. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. (Pipes and fittings shall be as per outline construction specifications (OCS) )
-
-
-
75 mm dia
1
-
-
110 mm dia
1
-
-
160 mm dia
1
-
-
200 mm dia
1
-
-
SUB HEAD - XXI ELECTRICAL WORKS Preparation & approval of detailed/shop/fabrication drawings, BOQ, supply, fabrication, erection, testing & commissioning as per specifications and Engineer In-Charge.
1
-
-
LT panels
-
-
-
Main Panel Supply, Installation, Testing and Commissioning of Indoor type LT Switchboards, Floor mounting type, Bottom/Top entry. Refer SLD for component details Enclosure: Compartmentalized Single front CRCA SHEET/CRGO (Cold rolled grain oriented sheet steel).Doors:2mm Body:2mm Gland:3mm covers and partitions:1.6mm IP class:IP52/IP42 for Indoor/IP55 with weather proof enclosure for outdoor.Bus bars: Electrolytic grade conductivity as per standard IS 5082.Bus bars: Electrolytic grade conductivity as per standard IS 5082.Bus bar Material: Aluminium / Copper as specified with PVC heat shrinkable sleeves. Bus bar supports: DMC/FRP/SMC.Bus bar joints: Shrouded/Tinned.Protection releases: As per SLD (Adjustable over current & short circuit unless otherwise specified).Ics=Icu for all breakersUtilization category: All MCCB/ACB's shall be Cat:A for Ltg & raw power input distribution panel shall be with Cat: B.Louvers: Busbar chamber shall have louvers with fine mesh inside Shade: Epoxy powder coatedDesign: Modular type Design: Modular type Cable entry: As per site condition. For Humidified areas the copper bus bars shall be coated with tin. Note: 1. The Panel shall be fully as per the requirement of Electrical Inspectorate/ EB authorities.2. Auxiliary contactor to be provided along with auto-manual switch where ever required.3. All Incoming Breakers shall have LED RYB ON OFF TRIP Indication & Outgoing shall have LED indications as specified .4. CTs shall be of cast resin type only and CT burden shall be 10VA and class 1.0 accuracy shall be provided. 5. All doors to have double rubber gasket with shutter assembly & door seating frame.6. All AC feeders will have time delays of 0-60 Seconds.7. All MCCBs of 250A and above for non-ups loads will be microprocessor based and all the panel incomer MCCB shall be of microprocessor based. 8. All DLMs to be of dual source meters with RS485 port unless otherwise specified.9. The current density for Aluminium bus bars shall be 0.8 only.10. The current density for Copper bus bars shall be 1.2 only.12. All MCCB's shall have plug setting from (70 -100%) for 250A & (40 - 100%) for 250A. 13. All Lighting / RP and Lift panels shall have ELR for incomer 14. All test certificates must be provided immediately after commissioning.15. SAFETY CERTIFICATE FOR THE PANELS SHALL BE PRODUCED FROM CEIG.16. All meters shall be Digital type only.17. FRLS PVC copper wires shall be used for control wiring. 18. The Manufacturer should have the CPRI approval certificate for this capacity.
-
-
-
T1 MAIN CHILLER PANEL
Incomer
2Nos – 800A 4P 50KA (Ics) EDO ACB with Microprocessor based (LSIG) Principle with O/C,S/C & EF releases with LCD Display(V,A,F) & LED indication for fault (O/C,S/C & EF ) and also healthness of releases indication with last 10 trips history inbuilt RS485 port. Each Breaker shall consists of following Metering Compartment:
1No. - Flush mounting Digital type Multi function meter with RS 485 port.( A,V,F,PF,kW ,kVA ,kVAr ,kWh ,kVArh ,THD-I&V and Individual harmonics upto 25th 1 Set – 3Nos. 800/5A CT CL 1.0 15VA for Measurement
1 Set – Indication lamps for R,Y,B, Breaker ON(Red), Breaker OFF (Green), Breaker Trip (Amber) with control MCBs.
1 Set – Indication lamps for trip circuit healthy,spring charge lamps
1 set- Mode selector & Breaker ON/OFF, trip circuit healthy Push Button Switch
1 No – Auto trip indication lamp
1Set - 2 O/C + 1 E/F relay
1No – Under voltage / Over voltage relay
1No - Master Trip Relay
1No - Trip_Neutral-close Breaker control switch
1 set – TPN MCB for control & potential circuit
2No - Class B surge arrestor with circuit breaker protection
Buscoupler
1No. - 800A 4P 35KA (Ics) EDO ACB without releases.
Each breaker feeeder shall consists of following
1Set – Breaker ON,Breaker OFF Indication lamps
1No – Trip_Neutral-close Breaker control switch
OUTGOINGS
5Nos – 320A TPN 35kA MCCB with Microprocessor releases
Breaker shall consists of following Metering Compartment:
1 Set – 3Nos. 320/5A CT CL1.0 10VA for Metering
1No. - Flush mounting Digital type Multi function meter with RS 485 port ( A,V,PF,kW ,kVA ,kVAr ,kWh ,kVAh )
1 Set – Indication lamps for Breaker ON(Red), Breaker OFF (Green), Breaker Trip (Amber) with control MCBs
4Nos – 100A TPN 35kA MCCB with Microprocessor releases
Breaker shall consists of following Metering Compartment:
1 Set – 3Nos. 100/5A CT CL1.0 10VA for Metering
1No. - Flush mounting Digital type Multi function meter with RS 485 port ( A,V,PF,kW ,kVA ,kVAr ,kWh ,kVAh )
1 Set – Indication lamps for Breaker ON(Red), Breaker OFF (Green), Breaker Trip (Amber) with control MCBs
4Nos – 80A TPN 35kA MCCB with Microprocessor releases
Breaker shall consists of following Metering Compartment:
1 Set – 3Nos. 80/5A CT CL1.0 10VA for Metering
1No. - Flush mounting Digital type Multi function meter with RS 485 port ( A,V,PF,kW ,kVA ,kVAr ,kWh ,kVAh )
1 Set – Indication lamps for Breaker ON(Red), Breaker OFF (Green), Breaker Trip (Amber) with control MCBs
Inter locking system :
Both the incomers and Buscouplers are controlled by electromechanical interlock to avoid paralleling of supplies of various sources
BUS BAR RATING:
One set: 800A 4P 35kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
CABLE ENTRY - TOP
Cable Gland Plate : 3mm thick Al sheets
1
-
-
T1 NON ESSENTIAL PANEL
LED type RYB ON OFF TRIP Indication lamp - 1set
Main incomer Breaker: 320A MCCB,25KA TPN -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
Class B+C surge protection device with MCB - 1set
Outgoing Breaker: 250A MCCB 25ka-2nos
Outgoing Breaker: 125A MCCB 25ka-2nos
Outgoing Breaker: 100A MCCB 25ka-1nos
One set: 320A 4P 25kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
1
-
-
T1 ESCALATOR PANEL
LED type RYB ON OFF TRIP Indication lamp - 1set
Main incomer Breaker: 125A MCCB,25KA TPN -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
Class B+C surge protection device with MCB - 1set
Outgoing Breaker: 32A MCB 10ka-8nos
One set: 125A 4P 25kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
1
-
-
T1 AHU PANEL
LED type RYB ON OFF TRIP Indication lamp - 1set
Main incomer Breaker: 100A MCCB,25KA TPN -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
Class B+C surge protection device with MCB - 1set
Outgoing Breaker: 32A MCB 10ka-6nos
Dummy compartment - 2nos
One set: 100A 4P 25kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
3
-
-
T1 POWER PANEL-1
LED type RYB ON OFF TRIP Indication lamp - 1set
Main incomer Breaker: 250A MCCB,25KA TPN -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
Class B+C surge protection device with MCB - 1set
Outgoing Breaker: 100A MCCB 25ka-2nos
Outgoing Breaker: 63A MCCB 25ka-10nos
One set: 250A 4P 25kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
1
-
-
T1 ESSENTIAL PANEL
Main incomer: 400A 4P ATS(Auto transfer switch) -1no
LED type RYB ON OFF TRIP Indication lamp - 2set
Main incomer Breaker: 400A MCCB,25KA TPN with MP releases -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
Class B+C surge protection device with MCB - 1set
Solar incomer Breaker: 250A MCCB,25KA TPN with MP releases -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
Outgoing Breaker: 200A MCCB 25ka-4nos
Outgoing Breaker: 100A MCCB 25ka-2nos
One set: 400A 4P 25kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
1
-
-
PHE PANEL
LED type RYB ON OFF TRIP Indication lamp - 1set
Main incomer Breaker: 100A MCCB,25KA TPN -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
Class B+C surge protection device with MCB - 1set
Outgoing Breaker: 32A MCB 10ka-6nos
Dummy compartment - 2nos
One set: 100A 4P 25kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
1
-
-
T1 POWER PANEL-2
LED type RYB ON OFF TRIP Indication lamp - 1set
Main incomer Breaker: 200A MCCB,25KA TPN -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
Class B+C surge protection device with MCB - 1set
Outgoing Breaker: 100A MCCB 25ka-2nos
Outgoing Breaker: 63A MCCB 25ka-10nos
One set: 250A 4P 25kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
1
-
-
T1 LIFT PANEL
LED type RYB ON OFF TRIP Indication lamp - 1set
Main incomer Breaker: 200A MCCB,25KA TPN -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
Class B+C surge protection device with MCB - 1set
Outgoing Breaker: 63A MCCB 25ka-10nos
One set: 200A 4P 25kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
1
-
-
T1 LIGHTING PANEL
LED type RYB ON OFF TRIP Indication lamp - 1set
Main incomer Breaker: 200A MCCB,25KA TPN -1no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 1set
CBCT with Earth Leakage Relay - 1set
Class B+C surge protection device with MCB - 1set
Outgoing Breaker: 40A MCCB 25ka with SHUNT TRIP COIL OR 4P POWER CONTACTOR - 12nos
Outgoing Breaker: 63A MCCB 25ka with SHUNT TRIP COIL OR 4P POWER CONTACTOR - 2nos
One set: 200A 4P 25kA for 1 sec.Al bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
NOTE: ALL THE OUTGOING MCCB IN THE LIGHTING PANEL IS TO BE PROVIDED WITH SHUNT TRIP COIL OR AC3 DUTY 4P POWER CONTACTOR AND NO NC CONTACTS SUITABLE FOR BMS MONITORING AND CONTROL OF BREAKERS.
1
-
-
UPS PANEL
LED type RYB ON OFF TRIP Indication lamp - 1set
Main incomer Breaker: 40A MCCB,25KA TPN -2no
Multi function Meter (A V F P.F KW KVA KWH KVAH) with RS485port, CT and wiring, Indication lamp - 2set
Class B+C surge protection device with MCB - 1set
Outgoing Breaker: 32A TPN MCB 10ka-4nos
Outgoing Breaker: 20A DP MCB 10ka-8nos
One set: 100A 4P 25kA for 1 sec.Cu bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Cable Gland Plate : 3mm thick Al sheets
1
-
-
ISOLATOR with Enclosures
Supply, installation, testing and commissioning of the following breakers in manufacturer's sheet steel enclosures, including all interconnections and accessories (IP20/42 for indoor and IP65 for outdoor)
-
-
-
32/20A DP MCB with IP20 enclosure
10
-
-
40/63A DP MCB with IP20 enclosure
10
-
-
63A TPN MCCB with IP42 enclosure
2
-
-
63A 4P MCB with IP65 weather proof enclosure
2
-
-
63A 4P 100mA RCCB with IP65 weather proof enclosure
2
-
-
80A 4P MCCB with IP65 weather proof enclosure
2
-
-
32A 4P MCB with IP65 weather proof enclosure
2
-
-
20/32A 4P MCB with IP20 enclosure
24
-
-
40/63A 4P MCB with IP20 enclosure
10
-
-
SECONDARY DISTRIBUTION SYSTEMS
-
-
-
Supply, erection, earthing, testing and commissioning of the following MCB DB's IP 43 Protection metal & Single/Double Door type with powder coated including all interconnections and accessories like bolts, nuts and associated civil works, etc; The rate shall inclusive necessary cable/conduit adopter boxes for IN and OUT wiring All DB supports shall be done with factory prefabricated supports and welding is not allowed in PEB columns/rafters etc,,.
-
-
-
LIGHTING DB-( 4way DB) - 7 SEG MENT
2
-
-
Supply, Installation, Testing and Commisioining of Single/ three phase, phase segregated, compartmentalised MCB DB Double door type, IP 42 powder coated comprising of "C" curve MCB's Incommer - 32A TPN MCB
Phase Incommer - 3 x 25A 30mA DP RCBO Outgoings - 6 A SP MCB - 12 nos Blank Plates/Dummy - if require Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
LIGHTING DB-( 6way DB) - 7 SEG MENT
4
-
-
Supply, Installation, Testing and Commisioining of Single/ three phase, phase segregated, compartmentalised MCB DB Double door type, IP 42 powder coated comprising of "C" curve MCB's Incommer - 32A TPN MCB Phase Incommer - 3 x 25A 30mA DP RCBO Outgoings - 6 A SP MCB - 18 nos
Blank Plates/Dummy - if require Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
LIGHTING DB-( 8way DB) - 7 SEG MENT
2
-
-
Supply, Installation, Testing and Commisioining of Single/ three phase, phase segregated, compartmentalised MCB DB Double door type, IP 42 powder coated comprising of "C" curve MCB's Incommer - 32A TPN MCB Phase Incommer - 3 x 25A 30mA DP RCBO Outgoings - 6 A SP MCB - 18 nosBlank Plates/Dummy - if require Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
POWER DB-( 6way DB) - 7 SEG MENT
4
-
-
Supply, Installation, Testing and Commisioining of Single/ three phase, phase segregated, compartmentalised MCB DB Double door type, IP 42 powder coated comprising of "C" curve MCB's
Incommer - 40A TPN MCB Phase Incommer - 3 x 40A 30mA DP RCBO Outgoings - 16/10 A SP MCB - 18 nosBlank Plates/Dummy - if require Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
POWER DB -(8 way DB) - 7 SEG MENT
4
-
-
Supply, Installation, Testing and Commisioining of Single/ three phase, phase segregated, compartmentalised MCB DB Double door type, IP 42 powder coated comprising of "C" curve MCB's Incommer - 63A TPN MCB Phase Incommer - 3 x 63A 30mA DP RCBO
Outgoings - 16/25 A SP MCB - 24 nos
Blank Plates/Dummy - if require Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
PDB DB -(12 way DB) - 7 SEGMENT
1
-
-
Supply, Installation, Testing and Commisioining of Single/ three phase, phase segregated, compartmentalised MCB DB Double door type, IP 42 powder coated comprising of "C" curve MCB's
Incommer - 63A TPN MCB
Phase Incommer - 3 x 63A 30mA DP RCBO
Outgoings - 16/25 A SP MCB - 36 nos
Blank Plates/Dummy - if require Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
EMERGENCY LDB.-(16 way SPN DB)
3
-
-
Supply, Installation, Testing and Commisioining of single phase, MCB DB Single door type, IP 42 powder coated comprising of "C" curve MCB's .
Incommer - 25A DP,30mA RCBO 1 noOutgoings - 6A SP MCB, 12 nos Blank Plates - if requires Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
MAIN EMERGENCY LDB.-(16 way SPN DB)
1
-
-
Supply, Installation, Testing and Commisioining of single phase, MCB DB Single door type, IP 42 powder coated comprising of "C" curve MCB's .
Incommer - 25A 4P MCB - 1 no
Outgoings - 20A DP MCB - 6 nos
Blank Plates - if requires Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
LDB / ELDB-(12 way SPN DB) - Terrace
2
-
-
Supply, Installation, Testing and Commisioining of single phase, MCB DB Single door type, IP 42 powder coated comprising of "C" curve MCB's .
Incommer - 25A DP,30mA RCBO 1 no
Outgoings - 6A SP MCB, 8 nos
Blank Plates - if requires
Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
UPS DB-(12 way DB)
2
-
-
Supply, Installation, Testing and Commisioining of single phase, MCB DB Double door/singledoor type, IP 42 powder coated comprising of "D" curve MCB's .
Incommer - 40A DP MCB
Outgoings - 10/16A SP MCB - 10 Nos
Blank Plates - if requires Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
UPS DB -(8 way DB) - 7 SEG MENT
1
-
-
Supply, Installation, Testing and Commisioining of Single/ three phase, phase segregated, compartmentalised MCB DB Double door type, IP 42 powder coated comprising of "C" curve MCB's Incommer - 63A TPN MCB Phase Incommer - 3 x 63A DP MCB
Outgoings - 16/25 A SP MCB - 24 nos
Blank Plates/Dummy - if require Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
SHOP DB-(8 way DB) - VTPN DB
1
-
-
Supply, Installation, Testing and Commisioining of three phase VTPN DB Double door type, IP 42 powder coated comprising of "C" curve MCB's .
Incommer - 63 A MCB - 1 No
Outgoings - 32 A TP MCB - 2
Outgoings - 20 A TP MCB - 6Blank Plates - if requires Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
SHOP DB-(12 way DB) - VTPN DB
3
-
-
Supply, Installation, Testing and Commisioining of three phase VTPN DB Double door type, IP 42 powder coated comprising of "C" curve MCB's .
Incommer - 63 A MCB - 1 No
Outgoings - 32 A TP MCB - 2
Outgoings - 20 A TP MCB - 10
Blank Plates - if requires Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
SHOP DB-(12 way DB) - VTPN DB
1
-
-
Supply, Installation, Testing and Commisioining of three phase VTPN DB Double door type, IP 42 powder coated comprising of "C" curve MCB's . Incommer - 80 A MCCB - 1 No
Outgoings - 32 A TP MCB - 2
Outgoings - 20 A TP MCB - 10Blank Plates - if requires Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions.
-
-
-
Lift DB
12 W SPN MCB DB with 'C' curve MCB's
1 no -40A 4P 300mA RCCB
1 nos – 32A 4P MCB
2 no – 10A DP MCB
8
-
-
LT CABLES & END TERMINATIONS Supply, Laying, Testing and Commissioning of stranded XLPE/PVC insulated, Armoured/Unarmoured/Flexible, Aluminum / Copper conductor, laid in tray / hume pipe / in ready made trenches, with nylon cable ties / MS Clamps @ 600mm interval etc., as required. Supply, Installation, Testing and Commissioning of Compression type cable gland, aluminum lugs for aluminum cables / copper lugs for copper cables, insulation tape, brass clamps for gland earthing with 14 SWG copper wire to connect to nearest earth flat.
Inner sheath: Extruded PVC only for Multicore
Outer sheath: Extruded Type ST2 PVC with FLAME RETARDANT LOW SMOKE(FRLS)
Voltage grade:1100Volts
Armoure: Galvanized Steel strip/Wire for multicore
Non Magnetic Aluminum Wire/Strip for Single core
Gland type : Brass with nickel plated
Sealing Ring : Natural rubber
-
-
-
XLPE Insulated & Steel Armoured Aluminium Conductor Cables
-
-
-
4C 400 Sq.mm.
20
-
-
End terminations
2
-
-
4C 300 Sq.mm.
260
-
-
End terminations
10
-
-
4C 185 Sq.mm.
60
-
-
End terminations
4
-
-
4C 120 Sq.mm.
210
-
-
End terminations
8
-
-
4Core X 95 Sqmm
20
-
-
End terminations
2
-
-
4Core X 70 Sqmm
20
-
-
End terminations
2
-
-
4Core X 50 Sqmm
320
-
-
End terminations
12
-
-
4Core X 35 Sqmm
50
-
-
End terminations
2
-
-
4Core X 25 Sqmm
50
-
-
End terminations
2
-
-
XLPE Insulated & Steel Armoured Copper Conductor Cables
-
-
-
4 Core X 35 Sqmm
20
-
-
End terminations
2
-
-
4 Core X 25 Sqmm
20
-
-
End terminations
2
-
-
4 Core X 16 Sqmm
1380
-
-
End terminations
60
-
-
4 Core X 10 Sqmm
760
-
-
End terminations
28
-
-
4 Core X 6 Sqmm
980
-
-
End terminations
44
-
-
4 Core X 4 Sqmm
850
-
-
End terminations
40
-
-
4 Core X 2.5 Sqmm
650
-
-
End terminations
12
-
-
4 Core X 1.5 Sqmm
620
-
-
End terminations
10
-
-
3 Core X 6 Sqmm
250
-
-
End terminations
10
-
-
3 Core X 4 Sqmm
720
-
-
End terminations
26
-
-
3 Core X 2.5 Sqmm
600
-
-
End terminations
20
-
-
3 Core X 1.5 Sqmm
360
-
-
End terminations
12
-
-
PVC Insulated & Flexible Copper Conductor FRLS cables (YY Type)
-
-
-
4 Core x 6 Sq. mm
250
-
-
End terminations
10
-
-
3 Core x 6 Sq. mm
180
-
-
End terminations
8
-
-
3 Core x 4 Sq. mm
450
-
-
End terminations
12
-
-
3 Core x 2.5 Sq. mm
850
-
-
End terminations
30
-
-
3 Core x 1.5 Sq. mm
200
-
-
End terminations
10
-
-
1 Core x 10 Sq. mm
120
-
-
End terminations
20
-
-
CIRCUIT MAINS
Circuit mains using 1.1kV grade PVC insulated copper conductor FRLS wires / PVC insulated PVC sheathed single core cables drawn in meadium duty MS ISI grade conduit . Rates quoted shall include supply of conduits, wires & other conduiting accessories.Circuit mains shall be measured from respective DB to the nearest point. All circuit terminations shall be provided with solder less crimping type copper sockets / lugs, ferrules indicating source code on load side & load code on source side. There shall not be any joints in the circuits, only looping is allowed in terminal blocks & at points.
NOTE:
1) Conduits running above false ceiling in multiples shall be supported by Slotted GI 'C' channel at distance not more than 0.9 mtrs intervals. OR else with spacers & saddles at an intervals of 0.5mtrs
2) Accessories shall includes Bends, Collars, junction boxes, Spacers, saddles, screws, Flexibles.
3) Conduits shall be ISI marked 4) The number of wires drawn in each conduit shall be as per IS 694 code. 5) No different phases shall be drawn in same conduit
6) Conduit joints shall be done with threading proper accessories only for MS.
7)Conduit joint shall be done with solvent solution properly for PVC
-
-
-
Lighting Circuit (DB - Switch box)
-
-
-
To wiring using 2R*2.5 + 1R*2.5 sq.mm PVC insulated FRLS wire drawn in 20mm dia MS conduit as per lighting circuit. The circuit main shall be measured in running metres from respective distribution board upto first light or switch point and looping between the switches (further onwards, it shall be deemed to be included in point wiring).
2850
-
-
To wiring using 2R*2.5 + 1R*2.5 sq.mm PVC insulated FRLS wire drawn in already laid conduit as per lighting circuit. The circuit main shall be measured in running metres from respective distribution board upto first light or switch point and looping between the switches (further onwards, it shall be deemed to be included in point wiring).
1100
-
-
Lighting Circuit (Switch box to switch box)
-
-
-
To wiring using 3R*1.5 sqmm PVC insulated FRLS wire drawn in 20mm dia MS conduit as per lighting circuit. The circuit main shall be measured in running metres from respective distribution board upto first light or switch point and looping between the switches ( further onwards, it shall be deemed to be included in point wiring).
150
-
-
To wiring using 3R*1.5 sqmm PVC insulated FRLS wire drawn in already laid conduit as per lighting circuit. The circuit main shall be measured in running metres from respective distribution board upto first light or switch point and looping between the switches ( further onwards, it shall be deemed to be included in point wiring).
100
-
-
Power Circuit
-
-
-
Supply & Installation of 2R*4 sq.mm and 1R*4.0 sq.mm PVC insulated FRLS wire drawn in 20mm dia MS conduits. Each phase to have colour of the wire same as that of phase colour (Red colour wire for R Phase, Yellow colour wire for Y phase & Blue colour wire for B phase)
1460
-
-
Supply & Installation of 2R*4 sq.mm and 1R*4.0 sq.mm PVC insulated FRLS wire drawn in already laid conduits. Each phase to have colour of the wire same as that of phase colour (Red colour wire for R Phase, Yellow colour wire for Y phase & Blue colour wire for B phase)
750
-
-
Supply & Installation of 2R*2.5 sq.mm and 1R*2.5 sq.mm PVC insulated FRLS wire drawn in 20mm dia MS conduits. Each phase to have colour of the wire same as that of phase colour (Red colour wire for R Phase, Yellow colour wire for Y phase & Blue colour wire for B phase)
1780
-
-
Supply & Installation of 2R*2.5 sq.mm and 1R*2.5 sq.mm PVC insulated FRLS wire drawn in already laid conduits. Each phase to have colour of the wire same as that of phase colour (Red colour wire for R Phase, Yellow colour wire for Y phase & Blue colour wire for B phase)
850
-
-
Supply & Installation of 4R*2.5 sq.mm and 2R*2.5 sq.mm PVC insulated FRLS wire drawn in 25mm dia MS conduits. Each phase to have colour of the wire same as that of phase colour (Red colour wire for R Phase, Yellow colour wire for Y phase & Blue colour wire for B phase)
50
-
-
Supply & Installation of 4R*10 sq.mm and 2R*6 sq.mm PVC insulated FRLS wire drawn in 32mm dia MS conduits. Each phase to have colour of the wire same as that of phase colour (Red colour wire for R Phase, Yellow colour wire for Y phase & Blue colour wire for B phase)
50
-
-
POINT WIRING
-
-
-
Primary Point Wiring: Supply, wiring, connecting & commissioning of 3Runs 1.5 Sq.mm. (Ph, Neutral & Earth) PVC insulated multistranded FRLS copper wires in 19mm dia MS conduit concealed on wall / ceiling with necessary clamps, screws, etc., including supplying and fixing of modular 6A One way switch along with moulded front plate in GI anodized manufacturer's mounting box fixed flush with the wall complete with all accessories including ceiling rose. Rates quoted shall include supply of conduits, wires & other conduiting accessories. (Approx length 6mtrs)
230
-
-
Secondary Point Wiring: Supply, wiring, connecting & commissioning of 2Runs 1.5 Sq.mm. (Ph, Neutral & Earth) PVC insulated multistranded FRLS copper wires in 19mm dia MS conduit concealed on wall / ceiling with necessary clamps, screws, etc., with all accessories including ceiling rose from one light point to other light point. Rates quoted shall include supply of conduits, wires & other conduiting accessories. (Approx length 4mtrs)
450
-
-
Secondary Point Wiring: Supply, wiring, connecting & commissioning of 2Runs 1.5 Sq.mm. (Ph, Neutral & Earth) PVC insulated multistranded FRLS copper wires in 19mm dia MS conduit concealed on wall / ceiling with necessary clamps, screws, etc., with all accessories including ceiling rose from one light point to other light point. Rates quoted shall include supply of conduits, wires & other conduiting accessories. (Approx length 8mtrs)
260
-
-
Two way Light point: Supply, wiring connecting and commissioning of 2 nos of 2 way switch in different location as indicated in the drawing and interconnection between them with 2 Runs of 1.5 sq mm PVC insulated multistranded FRLS copper wires and connection from switch box to load with 3 Runs of 1.5 sq mm PVC insulated multistranded FRLS copper wires in 20mm dia MS conduit in wall / ceiling with necessary clamps, screws, etc with all accessories including ceiling rose. Rates quoted shall include supply of conduits, wires & other conduiting accessories.
20
-
-
Ceiling fan point: The ceiling fan point will be same as primary light point as mentioned above along with fan regulator.
4
-
-
Two way Ceiling fan point: The ceiling fan point will be same as Two way light point as mentioned above along with fan regulator.
1
-
-
Exhaust Fan Point: Supply, wiring,connecting and commissioning of 3R 1.5sq.mm PVC insulated multistranded FRLS copper wires in 19mm dia, MS conduit concealed in wall/ceiling with necessary clamps,screws, etc with 5A socket with all accessories. The socket should be provided near the exhaust fan and the control should be provided at the lighting switch box at entrance. Rates quoted shall include supply of conduits, wires & other conduiting accessories.
2
-
-
Calling bell point: The calling bell point will be same as primary light point as mentioned above along with bell push switch.
2
-
-
Geyser Point: Supply, wiring,connecting and commissioning of 3R 2.5sq.mm PVC insulated multistranded FRLS copper wires in 19mm dia, MS conduit concealed in wall/ceiling with necessary clamps,screws, etc with 16A socket with all accessories. The socket should be provided near the geyser and the switch control should be provided at the lighting switch box at entrance. Rates quoted shall include supply of conduits, wires & other conduiting accessories.
2
-
-
POWER SOCKETS
Supply, Installation, Testing and Commissioning of the following Modular/Industrial Switch, sockets with modular front plate, and accessories as per the site conditions. All switch / sockets including front plate & frame which will be mounted on the metal boxes shall have removable film coat to protect from scratches & paint during installation. The quoted rate for power socket outlets shall include a. Socket outlets b. Switches c. 14SWG metal boxes with knockout on all sides d. Front plate of required colours with accessories Note: Safety shutters to prevent accidental contact with live parts shall be provided.
-
-
-
1 no X 6A socket controlled by 6A switch with back box
168
-
-
2 no X 6A universal socket controlled by 6A switch with back box
48
-
-
3 no X 6A universal socket controlled by 6A switch with back box
186
-
-
1 no X 6/16A universal type socket controlled by 16A switch with back box
316
-
-
USB Charger socket with back box
100
-
-
6 module MS back box for electrical outlets as per site requirement including necessary civil works
10
-
-
4 module MS back box for electrical outlets as per site requirement including necessary civil works
10
-
-
3 module MS back box for electrical outlets as per site requirement including necessary civil works
10
-
-
Industrial Sockets Supply, Installation, Testing and Commissioning of Industrial type sockets made of Polycarbonate / metal body with plug top mounted on the powder coated 14/16SWG CRCA sheet steel enclosures with screws, connectors etc fixing on wall in concealed / surface mounted with wall chasing rough plastering etc as required as per site condition. All switch / sockets shall be provided with printed labels / stickers indicating source code.
-
-
-
1No. 20A 3 pin 1phase Metalclad type socket with plug top controlled by DP MCB
2
-
-
1No. 16A 3 pin 1phase Industrial type polycarbonate socket with plug top controlled by 16A DP MCB (IP 44)
4
-
-
1No. 16A 3 pin 3phase Industrial type polycarbonate socket with plug top controlled by 16A 4P MCB (IP 44)
4
-
-
1No. 16A 3 pin 1phase Industrial type polycarbonate socket with plug top controlled by 16A DP MCB (IP 65)
4
-
-
1No. 16A 3 pin 3phase Industrial type polycarbonate socket with plug top controlled by 16A 4P MCB (IP 65)
4
-
-
LIGHTING Supply, Installation, Testing and Commissioning of Light fixtures with drivers, heat sink, connectors, lamps, SPD etc. with all necessary accessories, fixing on the wall / ceiling/false ceiling with wooden blocks, screws, hardware's, suspended chain hooks as required as per the site conditions (including the earthing of fixture). LED Luminous efficacy not less than 120lm/W, THD10%, P.F0.95, CRI0.8, 50,000 Burning hours, 5Years warranty, LM 79 & 80 standards, Operating Voltage 140 - 270V, SPD etc.
-
-
-
36 W Recess Mounted 2ftx2ft LED Light Fixture.
310
-
-
60 W Recess Mounted 2ftx2ft LED Light Fixture.
128
-
-
12W Surface / Recess Mounted LED Down light
96
-
-
18W Surface / Recess Mounted LED Down light
75
-
-
15W Recess Mounted LED COB Down light 120 degree beam angle
42
-
-
12W Recess Mounted LED COB adjustable / tiltable Down light
10
-
-
8W Recess Mounted LED COB wall washer light
10
-
-
8W Recess Mounted LED COB Down light 120 degree beam angle
10
-
-
10W Surface mounted LED Mirror light
20
-
-
30W Recess Mounted LED COB Down light 120 degree beam angle
10
-
-
30W Surface Mounted LED Down light
10
-
-
LED Chandlier light as per architect choice
2
-
-
LED strip light fixture (5W/m) as per architect choice 5.0 mtrs per roll with driver
20
-
-
4 Feet 20W Surface / Recess LED Light Fixture
20
-
-
4 Feet 40W Surface / Recess LED Light Fixture
95
-
-
100W Pendant / Surface mount LED Highbay light
10
-
-
10W Surface Mounted LED bulk head light (IP65)
22
-
-
60W Wall /Pole Mounted LED flood light (IP65)
2
-
-
40W Wall /Pole Mounted LED flood light (IP65)
4
-
-
40W Wall /Pole Mounted LED street light (IP65)
2
-
-
4 Feet 40W Pendant / Recess LED Linear Light Fixture
32
-
-
Bolard light (IP66)
10
-
-
Garden focus light with spike (IP66)
10
-
-
Supply, Installation, Testing and Commisioining of 1200 mm dia single phase BLDC Ceiling fan with accessories and fixing the same in the ceiling with down rod, screws ,hardwares as required.
5
-
-
Supply, Installation, Testing and Commisioining of 450 mm dia single phase wall mount fan with accessories and fixing the same in the wall / frame with screws ,hardwares as required.
2
-
-
Supply, Installation, Testing and Commisioining of 200 mm dia single phase exhaust fan with accessories and fixing the same in the wall / frame with screws ,hardwares as required.
2
-
-
Supply, Installation, Testing and Commisioining of 300 mm dia single phase exhaust fan with accessories and fixing the same in the wall / frame with screws ,hardwares as required.
2
-
-
Supply, Installation, Testing and Commisioining of Occupancy Sensor with all accessories and same in the ceiling / wall as per site conditions.
10
-
-
Supply, Installation, Testing and Commisioining of calling bell with all accessories and same in the ceiling / wall as per site conditions.
2
-
-
CABLE TRAYS Supply and erection of GI Ladder type trays including tees, bends, right angles etc. including all fixing accessories like anchor fastner, GI threaded down rod, slotted channels, clamps, bolt nuts etc. as per site conditions of the following sizes:-
-
-
-
Ladder type trays
-
-
-
1000 x 70mm x2mm
60
-
-
750 x 70mm x2mm
40
-
-
600 x 70mm x2mm
50
-
-
450 x 50mm x2mm
20
-
-
300 x 50mm x2mm
80
-
-
150 x 50mm x2mm
60
-
-
Perforated tray
-
-
-
600 x 70mm x 2mm
80
-
-
300 x 50mm x 2mm
150
-
-
150 x 50mm x 2mm
180
-
-
100 x 50mm x 2mm
320
-
-
Tray cover
-
-
-
605 x 15mm x 2mm
50
-
-
305 x 15mm x 2mm
50
-
-
155 x 15mm x 2mm
100
-
-
105 x 15mm x 2mm
100
-
-
RACEWAYS AND CONDUITS
-
-
-
Floor raceways
Supply, Fixing of Aluminium Trunking box of 1.6mm thick and should be earthed every 3meters with 16 SWG copper wire including Chicken mesh, hardwares, Clamps(for every 1mtr) and all other accessories as required as per the site condition for fixing the same. (the proper GI/MS couplers to be used in between the joining of raceways) Note: The necessary chamfering and filing to be done in the raceways edges to avoid the damage of cables/wires while pulling. The Extention of the Junction boxes below modular till entry to the modular furniture with 32mm dia PVC conduit / Bends / Hoses for Data and Electrical cables to be considered in the costing and shall not be paid extra.(cost is inclusive of floor cutting and plastering)
-
-
-
100 x 45mm Size
350
-
-
50 x 25mm Size
160
-
-
Floor cutting , Debris removal and platering charges for Race ways
450
-
-
GI - Junction boxes (JUNCTION BOX DEPTH TO SUIT TO SCREED DEPTH AT SITE)
-
-
-
450 x 450 x 60mm Size
1
-
-
350 x 350 x 60mm Size
10
-
-
250 x 250 x 60mm Size
15
-
-
150 x 150 x 60mm Size
35
-
-
Supply and fixing of floor embeded 300x300x50mm GI junction box with 2nos 6A socket controlled by 6A switch and dual face plate for data I/O points with heavy duty polycarbonate removable cover and top opening as required as per site condition (MK Ega box).
10
-
-
Supply & Laying of following size Medium Duty PVC / MS ISI grade conduits concealed in ceiling / wall with all accessories. Rate shall include wall chasing & rough plastering, clamping / fixing arrangement. Accessories shall includes Bends, Collars, junction boxes, Spacers, saddles, screws, etc as required as per site condition.
-
-
-
32 mm dia PVC conduit
100
-
-
25 mm dia PVC conduit
450
-
-
19 mm dia PVC conduit
500
-
-
25 mm dia MS conduit
250
-
-
19 mm dia MS conduit
250
-
-
25 mm dia MS flexible hose
50
-
-
EARTHING ARRANGEMENT SYSTEM
Supply and laying of following earth flats laid in open / concealed fashion with necessary clamps, SMC insulators, screws, interlinks etc. for earthing . The neutral earth flats are to be covered with black sleeves and run with suitable insulator supports
-
-
-
GI Flat
-
-
-
Supply & Laying of 50x6mm GI. Flat
100
-
-
Supply & Laying of 25x6mm GI. Flat
250
-
-
Supply & Laying of 25x3mm GI. Flat
150
-
-
Cu Flat
-
-
-
Supply & Laying of 25x3mm Cu. Flat
260
-
-
Supply & Laying of 8 SWG bare Cu. Wire
160
-
-
Supply & Laying of 12 SWG bare Cu. Wire
150
-
-
Copper wire
-
-
-
1 Core x 6 sq.mm and end terminations
180
-
-
end terminations
10
-
-
1 Core x 16 sq.mm and end terminations
350
-
-
end terminations
6
-
-
Supply installation testing and commissioning of following earth station generally as per IS 3043, with proper earth lead connection arrangements and electrode as below. The rate shall include all materials, excavation, refilling and 'compacting providing 450x450x600 mm brick masonry with wall thickneess of not less than 230mm, GI funnel and charcoal, Ductile iron or RCC frame & cover with holes etc., complete. The GI funnel and tapping connection shall not be greater than 250 mm from the bottom of chamber. Also rate shall include 250KN ductile iron /RCC/FRP/SFRC Frame & cover for earth pit.
-
-
-
600x600x3.15mm Copper plate earth electrode with 40mm Dia GI pipe 3m depth
4
-
-
Copper bonded (250microns) maintenance free earth electrode, 38 mm dia wall thickness 1.60 mm, 3 meter long, pipe in pipe, inner space of pipe filled with high conductive material along with 2 bags (25Kg to a bag) of Earth RITE Compound.
4
-
-
Pipe earthing with 100mm dia, 13mm tk. 2.5M long C I pipe.
1
-
-
MISCELLANEOUS ITEMS
-
-
-
Supply and providing of 6mm thick MS Chequered Plates as floor separators for covering the shafts with angle iron supports at floor level to form a complete fire barrier protection between two floors and to cover the gaps around the cable trench etc., in the duct.
6
-
-
Supply, Fabrication and Erection of M.S. Material for Rising mains, Busduct, SB, DB's supports, iron embedded in the wall, steel structure in open area painted with two coats of primer and two coats of enamel paint.
750
-
-
Supply, Providing & fixing Fire Barrier mortar Hilti CP 636 of 50 mm thick with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The service lines could be of various types like electrical cables trays, metal pipes, GI Ducts for AC, etc. The product shall be age tested as per Dafstb and DIBT standards. The product should be tested for mold resistance rating of 0 as determined by ASTM G21-96. The product shall be tested and approved by third party agencies such as UL and FM. The mortar should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall bear the UL and FM approval logo on the packing where applicable.(for electrical shaft cutout opening closing purpose)
5
-
-
Supply, Installation, Testing and Commissioning of 8m Height street light pole Hot dip GI Octagonal pole (Heavy strength) with terminal connector box, single side bracket, mounting clamps, foundation bolt nut, base plate, internal copper wiring from terminal box to light fixture, DP MCB etc as per the standards and site requirements. Installation cost includes civil works like construction of Foundations & shifting of poles to desired locations using crane / hydra / fork lift / hand lift etc as required as per site condition.
1
-
-
Supply, Installation, Testing and Commissioning of 8m Height street light pole Hot dip GI Octagonal pole (Heavy strength) with terminal connector box, double side bracket, mounting clamps, foundation bolt nut, base plate, internal copper wiring from terminal box to light fixture, DP MCB etc as per the standards and site requirements. Installation cost includes civil works like construction of Foundations & shifting of poles to desired locations using crane / hydra / fork lift / hand lift etc as required as per site condition
1
-
-
Supply and Installation of 24 hour timer switch with relay contactor terminal connector block and enclosure for external light control.
1
-
-
Supply and fixing of the Polycarbonate Junction box (IP67) with 20A 4way terminal connectors for loop-in loop-out cables for external area lights with suitable knock out holes for cable glands, termination arrangment (1no. IN and 2/3 nos. OUT) with earthing and necessary mounting arrangement, screws etc.as required.
2
-
-
Supply, installation testing and comissioning of BMS system for lighting control system as per RFQ Document and as per RDSO specification with control cabling from BMS room to Lighting panel, earthing and necessary mounting arrangement, screws etc.as required.
1
-
-
Supply, installation testing and comissioning of 32A 4P MCB and 3phase digital energy meter with RS485 communication port, CT and interconnection copper wiring for shops power as per RFQ Document and as per RDSO specification with earthing and necessary mounting arrangement, screws etc.as required.
42
-
-
UPS / INVERTER / C.O.S
-
-
-
Supply installation and commissioning of 20Kva (3Ph/3Ph) Online double conversion UPS along with SNMP, parallel kit, Open metal Rack, DC breaker & accessories with SMF batteries on each UPS will provide 2hour full load backup for ELV loads as required as per site condition.
2
-
-
Supply of Installtion of 10kva (3Ph/3Ph) Inverter For Emergency lighting with 90mins tall tubular battery backup with MS Stand as required as per site condition.
1
-
-
LIGHTNING PROTECTION SYSTEM (Conventional)
-
-
-
Design, Manufacture, Supply, Installation Testing and commissioning of Lightning protection system as per IEC/IS 62305 (mesh method). The terrace area and height of the RCC building shall be 9000sqft and 25mtrs approx. The rate shall inclusive of horizontal and vertical aluminium conductors, UV resistance Nylon/PU conductor holder for wall and roof, Stainless steel Cross Connector, straight connector, Expansion joint with connector, folded clamp for fixing Aluminium conductor on the metal structure, air termination rod of 3mtr / 1mtr length of material AlMgSi of diametre ø 16/10 mm crimped on both the ends (Tappered Type) which shall be mounted with stainless steel clamp and fixing accessories, 8mm dia Aluminium alloy Solid Round Conductor of material AlMgSi used in air termination and Cross sectional area of conductor should be 50 mm², stainless steel Earth stud connecting point of dimension 70 x 70 mm integrated inside concrete and should be tested for electrical resistivity, salt spray and humidity test & short circuit . Test Parameter:
a.Lightning impulse current of 100kA for 10/350 µs
b.Electrical resistivity - 0.036 µΩm, Tensile strength - 120 to 240 MPa or N/mm², Salt spray - No Sign of Corrosion.
1
-
-
Supply, Installation Testing and Comissioning of Lightning protection system with 1 meter long 16 mm soild rod with Multiple spike with base plate arrangemant with all necessary accessories as required as per site condition.
1
-
-
2 meter G.I mast for holding Lightning protection system
1
-
-
50mm² insulated copper cable. Able to withstand 250KA current and above.
1
-
-
20x6mm Aluminium flat with insulator to run on the pheripheral parapat wall / floor along with fixing acessories
1
-
-
Supply, Installation Testing and Comissioning of GI Lightning spike 1 meter long with base plate fixing arrangemant with all necessary accessories as required as per site condition.
1
-
-
Supply installation testing and commissioning of copper coated / bonded maintenance free earth electrode with earth rite compound generally as per IS 3043, with proper earth lead connection arrangements. The rate shall include all materials, excavation, refilling and 'compacting providing 450x450x600 mm brick masonry GI funnel and charcoal, Ductile iron or RCC frame & cover with holes etc., complete. The tapping connection shall not be greater than 250 mm from the bottom of chamber.
10
-
-
LIFT SHAFT ELECTRICAL WORKS
-
-
-
Supply and Wiring to the lift well points using 3 Runs of 1.5 sq.mm. Multistrand PVC insulated copper conductor wires (FRLS) in suitable size 1.8mm thick 25mm dia MS conduit in open system including supply of 5 A Switched Socket combined in MS mounting box fixed in wall with 5A switch for lamp control inside the Lift Shaft at each floor level.(The length of wire shall be 6mtrs approx).
24
-
-
Supply,Leading, installation, testing and commissioning of Wall / ceiling mounted 10W LED Bulk head fitting with driver etc.The rate shall include all accessories like clamps, supporting brackets, hardwares as required as per site condition.(Lift well area & etc)
24
-
-
SAFETY EQUIPMENTS
All the items shall be of IS certified All the items shall be in line with CEIG requirement
-
-
-
Laminated Schematic drawings
2
-
-
Supply & laying of 1100 V grade Synthetic mat of size 2 m x 1m x 6.35 mm in front of MSB and Panels as per IS 5424
10
-
-
Supply of Caution Board ( LT)
2
-
-
First Aid Box
2
-
-
First Aid Chart (English & Local language)
2
-
-
Temporary Lighting and Power
-
-
-
Providing distribution boards with proper protection and industrial socket to tap power for cutting, grinding, drilling and welding related work. at floor level (including Suitable Energy Meter)
No loose wire connection to be allowed to plug in industrial socket provided in distribution board.
Temporary lighting and power including all wiring and supports shall be removed when permanent lighting is installed.
The contractor shall take regular lux level readings to ensure the temporary lighting system is installed and maintained as specified.
1
-
-
STATORY APPROVALS
-
-
-
Preparation and Submission of as built drawings of total work executed (3 Sets hard copy and 3 Sets soft copy)
1
-
-
Professional charges towards filing application, preparation of drawings in necessary formats for approval, follow up and arranging approval of drawings, scheme by Local electricity authority / Electrical Inspectorate, preparation of completion report, obtaining clearance and safety certifcate from electricity authority / Electrical Inspectorate. (CEIG / CEA)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%