Department Of Local Administration Tender

Centring and shuttering including strutting , propping etc. and removal of form work for - foundations, footings, bases for columns

Steel reinforcement for R.C.C.work including straightening , cutting.bending , placing in position and binding all complete upto plinth level - Thermo Mechanically treated bars Fe - 500 or more

Providing and laying lean reinforced cement concrete pavement over exiting concrete base / prepared base with M30 grade concrete with minimum cement content of 405 kg / cum and maximum size of course aggregate not exceeding 20mm mixed with super plasticizer at 200ml per bag of cement to mixed in weight batching plant as per approved mix design,transporting to site, laying, compacting with vibrators and including finishing the top surface smooth with powertrowel, with floor hardener sprinkled @ 4 kg /sqm, roughening the surface with steel wire brush in straight direction perpendicular to road.The rate is inclusive of cutting longitudinal joint of size 4mm X 15mm at centre of the road and traverse joints between 2 to 3 metre Centre/Centre,(The rate is exclusive of reinforcements,centering and bituminous pad at expansion joint).Note: Cement content considered in this item is 405kg/cum. Excess/ less cement usedas per design mix is payable /recoverable separately – upto plinth level

Fabrication, supply and fixing of Informatory board of size 1.2m X 0.6m of diamond graded reflective sheeting capsulated on aluminium sheets of not less than 2 mm thick suitably supported and framed by M.S angles of size 40mm X 40mmX 6mm. The informatory lettering and the symbols will beprovided by high intensity white grade white sheeting. The board is supported by a post pipe of size 80 mm dia M.S.heavy for a height of 3.6 m and extended and supported to theextreme width of the board on the rear side. This board frames and post pipes will be painted by Zinc chromate primer and white colour enamel paint and embedded in ground pit of size0.6m X 0.6m X 0.6m with PCC 1:2:4. Rate includes all materials labour charges conveyance concreting, painting

Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, gates and similar works

12mm cement plaster of mix -1:4 ( 1 cement : 4 fine aggrigate)

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size & design / shape laid in required colour andpattern over and including 50mm thick compacted bed of coarse sand , filling the joints with fine aggregate etc. all complete as per the direction of Engineer-in-charge

Disposal of Debris / Surplus erxcavated earth including loading, unloading and conveayance to low lying areas with in 2m lead as directed by the Engineer-in -charge

Raising of various types of manholes and flushing tank by cutting alround the manhole cover, removing the frame and cover from the manhole by cutting the B.T., .B.M., surface, raising the manhole to the required height with brick work in cement motar 1:4 (One cement and four sand), refixing the frame in position by laying cement concrete 1:1.5:3 (One cement one and half sand and three 20mm HBG metal) including curing, but excluding the cost of reinforcement, finishing the top, inside and outside plastering with 20mm thick in cement mortar 1:3(one cement three sand), the rate includes all materials, providing barricading,caution board, watch and ward etc.,complete till the completion of work with minimum hindrance to the traffic.- 30cm height.