Department Of Local Administration Tender

Providing, laying, spreading and compacting Cum stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth 3 wheeld steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum or gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-II with moorum or gravel screening. (As per MoRTH specification, 4th Revision)

Cleaning the existing W.B.M. road surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. As per clause no 502.4.2 and 503.3.1 of MOST specification.

Providing and applying tack coat on the prepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on granular base such as WBM and WMM surfaces not bitumen primed. Rate of application 10kg/10sqm.

Providing and laying open graded premix carpet 20mm thick on prepared surface in a single course as wearing course composed of specified size of stone aggregates premix with a bituminous binder in mini hot mix plant 6 to 10 tonne laying manually and rolling with power roller 8 to 10 tonne but excluding cost of primer/tack coat. As per clause no 509 of MOST specification

Providing and applying premixed seal coat type `B' comprising of thin application of fine aggregate premix with bitumen binder in mini hot mix plant, carriage manually of mixed material and laying and rolling with power roller 8 to 10 tonne. As per clause no 513 of MOST specification.

Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth , breaking clods , watering ,rolling each layer with 1/2 tonne roller ,or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lift (Payment will be made based on level measurement)

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete - 300 mm dia.

Fabrication, supply and filling of village/information name board of size 1.06mts x 0.61mts. The width of the board in tapered ar 0.80mts upto 1.06mts to give the triangular shape at One end with High intensuty refercting sheeting of required color encapaulation on alumunum sheet of not less than 2mm thick suitably supported and framed with 25mmx25mmx3mm AISI 316 grade stainless strell angle and the board frame is supprted alround with AISI 316 grade stainless steel pipe of 38.10mm dia (outer dia & 2mm well thickness). The village names/street names, lettering and symbols will be provided by high intensity grade white sheeting. The board is supported by Two nos of 63.5mm dia post S.S pipe for 2.0mts height with same dia Dummy plate arrangement at the top. The welding with neccssary polishing etc, and M.S. pipe of 50mm dia for a lenght of 35mm well be welded at the bottom of the postand ixed in a gound pit of size 0.45x0.45x0.50mts with P.C.C 1:2:4. Rate including all the material, S.S, welding, Grinding, Polishing, fabrication charges Conveyance etc except Earth work and P.C.C charges, complete.