Department Of Local Administration Tender

Code No. 4.3.1 Centering shuttering including struttings, propping etc. and removal of form work for foundations, footings, bases for columns.

Code No. 5.28 Providing and fixing in position 12mm thick bitumen impregnated fibre board conforming to IS : 1838 including cost of primer, sealing compound in expansion joints

Code No. 10.25.1 Steel work welded in built up sections / framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required all complete.

Code No. 13.16.1 6mm cement plaster of mix - 1:3 (1cement : 3 fine sand))

Code No. 15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Code No. 16.68 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand , filling the joints with coarse sand etc. all complete

Code No. 2.5.1B Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately - by manual means - Granular courses

Code No. 3.15 Scarifying the existing bituminous surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1000 metres - by mechanical means.

Code No. 3.30 Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 tonne smooth wheeled roller, complete as per clause 310.

Code No.NPSR (SE approved rate. No.523/SE-OM/AE(P)/LAD/2016-17, dt.08/03/2017) Fabrication, supply and fixing of village/informatory name board of size 1.06mts x 0.61mts. The width of the board is tapered at 0.80mts upto 1.06mts to give the triangular shape at one end with high intensity reflective sheeting of required color encapsulation on aluminium sheet of not less than 2mm thick suitably supported and framed with 25mmx 25mmx 3mm AISI 316 grade stainless steel angle and the board frame is supported alround with AISI 316 grade stainless steel pipe of 38.10mm dia (outer dia & 2mm wall thickness). The Village names/street names, lettering and symbols will be provided by High Intensity grade white sheeting. The board is supported by Two Nos. of 63.5mm dia post S.S pipes for 2.0mts height with same dia Dummy plate arrangement at the top. The board frame and post pipes are welded by Tig welding with necessary polishing etc, and M.S pipe of 50mm dia for a length of 35cm will be welded at the bottom of the posts and fixed in a ground pit of size 0.45x045x0.50mts with P.C.C 1:2:4. Rate including all the materials, S.S welding, Grinding, Polishing, fabrication charges, conveyance etc except Earth work and P.C.C charges, complete.