Department Of Local Administration Tender

Code No. 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level-1:3:6 (1cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Code No. 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

Code No. 4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, bases for columns.

Code No. 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

Code No. 15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Code No. 15.2.2 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Code No. 31.161.1D (Addendum) Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement, UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.

Code No. 31.165.1G Providing and fixing in position UPVC moulded unequal Tee (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 110 x 63mm dia

Code No. 3.11 Removal of unserviceable soil including excavation, loading and disposal upto 1000 m lead but excluding replacement by suitable soil which shall be paid separately as per Clause 305.

Code No. 4.91B Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth three wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum / gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-I with Gravel screening. (As per MoRTH specification, 4th Revision).

Code No. 6.3.MO Scarifying existing stone metal layer up to 75mm thick along with their bituminous surface, picking up scarified material and stacking of old serviceable material within a lead of 100m sequential spreading the salvage aggregates with fresh aggregates on prepared base and consolidating as per water bound macadam specification. As per clause no 404 of MOST specification.

Code No. 0322 (Baic rate - Addendum) Hiring charges for front end loader JCB as directed by the Engineer-in-charge.

NPSR (SE approved rate) Fabrication, supply and fixing of Village / informatory name board of size 1.06mts x 0.61mts. The width of the board is tapered at 0.80mts upto 1.06mts to give the triangular shape at One end with High Intensity reflective sheeting of required color encapsulation on aluminum sheet of not less than 2mm thick suitably supported and framed with 25mm x 25mm x 3mm AISI 316 grade Stainless steel angle and the board frame is supported alround with AISI 316 grade stainless steel pipe of 38.10mm dia (outer dia & 2mm wall thickness). The Village names / street names, lettering and symbols will be provided by High Intensity grade white sheeting. The board is supported by Two Nos. of 63.5mm dia post S.S. pipes of 2.0mts. height with same dia Dummy plate arrangement at the top. The board frame and post pipes are welded by Tig welding with necessary polishing etc. and M.S. pipe of 50mm dia for a length of 35cm will be welded at the bottom of the posts and fixed in a ground pit of size 0.45 x 0.45 x 0.50 mts. with P.C.C 1:2:4. Rate including all the materials, S.S. welding, Grinding, Polishing, fabrication charges, Conveyance etc. except Earth work and PCC charges, complete.