Department Of Local Administration Tender

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 fine aggregate : 4 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 fine aggregate : 10 graded stone aggregate 40mm nominal size)

Centring and shuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns

Supplying at site : RCC standards post / struts/ rails/ pales of mix 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs, wherever required as per direction of Engineer-incharge (cost of earth works in excavation , concrete works in foundation to be paid separately)

Providing and fixing G.I.chain link fabric fencing of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts , bolts and washers as required complete as per direction of Engineer-in-charge - Made of G.I.wire of dia 4mm , PVC coated to achieve outer dia not less than 5mm in required colour and shade

Steel work welded in built up sections / framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Fabrication, supply and fixing of Village / Informatory name board of size 1.06mX0.61mts. The width of the board is tapered at 0.80mts upto 1.06mts. to give the triangular shape at one end with High intensity refelective sheeting of required colour encapsulation on aluminium sheet of not less than 2mm thick suitably supported and framed with 25mm X25mm x3mm AISI 316 grade stainless steel angle and the board frame is supported alround with AISI 316 grade stainless steel pipe of 38.10mm dia (Outer dia X 2mm wall thickness). The Village Names / street Names lettering and symbols will be provided by High Intensity grade white sheeting . The board is supported by Two Nos. of 63.5mm dia post S.S pipes for 2.00mts height with same dia dummy plate arrangement at the top. The board frame and post pipes are welded by Tig welding with necessary polishing etc., and M.S. pipe of 50mm dia for a length of 35cm will be welded at the bottom of the posts and fixed in a ground pit of size 0.45X0.45X0.50mts with P.C.C 1:2:4 Rate including all the materials s.s welding Grinding Polishing fabrication charges, conveyance etc. including Earth work and PCC charges etc. complete.