Department Of Local Administration Tender

Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:4 ( 1 cement : 4 coarse sand)

6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand)

Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc

12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand)

15mm cement plaster on rough side of single or half brick wall of mix - 1:4 (1 cement : 4 coarse sand)

Colour washing such as green, blue or buff sqm to give an even shade - New work (two or more coats) with a base coat of white washing with lime

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete

Providing and fixing 1mm thick M.S. sheet door with frame of 40X40X6mm angle iron and 3mm M.S. gusset plates at the junctions andcorners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30X6mm for diagonal braces and central cross piece.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work.

Providing and fixing of 65mm Godrej Navtal lock of 6 levers etc complete

Providing and fixing factory made UPVC white colour casement /casement cum fixed glazed windows comprising of uPVC multi-chambered frame , sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension , EPDM gasket , stainless steel (SS 304 grade) friction hinges , zinc alloy (white powder coated) casement handles, G.I fasteners 100 x8 mm size for fixing frame to finished wall , plastic packers , plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality , all complete as per approved rawing.(Single / double glass panes and silicon sealent shall be paid separately) - Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm ) made of (small series) frame 47 x 50 mm , sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 + or - 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm) - casement window size 1.00x1.35 m

Providing and fixing kitchen sink with C.I.brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required - white glazed fire clay kitchen sink of size 600x450x250mm

Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality and colour - waste coupling 38 mm dia of 83 mm length and 77 mm breadth weighing not less than 60 gms

Drilling of borewell any where in Pondicherry including tranportation in alluvial soil, sedimentary strata of clay,sand stone, shale, pebbles, boulders etc. by first taking a pilot bore of 140mm / 150mm / 200mm and then enlarging to required dia by direct or reverse rotary mud circulation method,including fuel, labour for drilling, bentonite mud, water required for drilling at the site, contruction of mud pit (water available within a lead of 1.5Km) using rotary rig. -Upto 60 mts depth ending below ground level.

Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such asbends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 32 mm dia.

Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excludingUPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 90mm dia.

Providing and fixing in position UPVC moulded endcap (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 90mm dia

Providing and fixing gun metal non -return valve of approved quality (screwed end) - 25mm nominal bore -vertical

Providing and fixing brass stop cock of approved quality - 20mm nominal bore

Providing, laying and jointing UPVC pipes(Finolex /Jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 25mm dia.

Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 122 mm long , weighing not less than 99 gms

Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness

Supplying fixing and commisioning of Suguna / Texmo / Sharp 0.5 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc.complete

Providing and placing on terrace (at all litre floor levels) polyethylene water storage tank ISI: 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - Circular Tank

Providing and laying of reputed make multistranded copper wire of following size confirming to ISS (Make l Kundan (or ) Finolex (or) equivalenta) 1.50sqmm (Sl.No.1.5.1

Providing and laying of reputed make multistranded copper wire of following size confirming to ISS (Make l Kundan (or ) Finolex (or) equivalentb) 2.50sqmm (Sl.No.1.5.2

Providing and fixing of ISI certified , reputed make battern angle holder suitable for 250V ( Make ; Anchor / Kundan)

Providing and fixing of ISI certified reputed make flush type Ceiling rose of Two Terminals suitable for 5 A, 230V.

Supplying and shaping of standard size and fixing of 3mm thickness electrical teak wood board Mica sheet of colour ivory while/ dark brown including slot cutting with required screws. a)150X100 x 3

Supplying and shaping of standard size and fixing of 3mm thickness electrical teak wood board Mica sheet of colour ivory while/ dark brown including slot cutting with required screws. b)375X300 x 3

Supplying and fixing 5/6amps indicator on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

Supplying and fixing 3 pin 5/6amps piano/flush type socket outlet on the existing switch box/cover including connectionsetc. as required.Make:Kundan/Anchor/Vinay

32A cutout fuse unit Make: Kundan

Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connectionsetc. as required.Make:Kundan/Anchor/Vinay

1 x 40Supply of box type single tube light fitting with copper choke & starter without tube. Make: Philips/Bajaj

Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay :-

Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

Supplying and fixing Step type socket Fan Regulator on the existing switch box/cover including connections etc. as required.Make:Kundan /Anchor/Vinay:-

1200mm sweep double ball bearing ceiling fan Make:Almonard/Usha

Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required.Make:Avonplast/ Vijaya:- 20mm Junction Box two way

Supplying and fixing of following size of PVC conduit alongwith the accessories in surface/recess Conduit including cutting the wall and making good the same in case of recessed conduit as required.Make:Avonplast/Vijaya:- 20mm dia

Supplying and fixing 10 amps Kit Kat Fuse on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:

Installation, testing and commissioning of prewired, all kind of surface mount light fittings, complete with all accessories etc.directly on high ceiling/wall, including onnections with 16/0.20 mm twin core FR PVC sheathed flat flexible, copper cable etc. as required.

Installation testing and commissioning of ceiling fan/wall Nos.mounting fan and wiring the down rod of standard length .(upto 30cm) with 14/.86mm Plastic insulated twisted Copper wire including earthing as required:

Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing, commission as required.

Supply of 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha