Department Of Local Administration Tender

CODE NO.31.122.1A Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro Steel/Lanco/Jindal /Electrotherm) conforming to IS Specification 8329/2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/company to the site at Puducherry, lowering to the trenches(or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS12288 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) -100mm dia.

CODE NO.31.124.1A Providing and fixing in position flanged standard D.I. specials (Electro Steel/Lanco/Jindal/Kiswok) such as tees, bends, collors, tapers, caps etc.conforming to IS specification 9523/2000 and ISI marked - 100 to 300mm dia.

CODE NO.31.131.1B Providing and fixing Cast iron flanges conforming to IS specification 1538 and ISI marked. - 100 mm dia.

CODE NO.31.131.2B Threading of CI / DI pipes suitable for fixing flanges including transportation, labour charges etc.,complete - 100 mm dia.

CODE NO.31.161.1F Providing, laying and jointing UPVC pipes(Finolex/Jain)(0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the inches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees,threadedpieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification - 110mm dia.

CODE NO.31.250.1H Supplying of electrically operated wet type submersible motor and pumpset (Texmo/KSB/Taro/Kirloskar make), AC 3 phase, 415 volts, 50 Hz, 2900-3000 RPM. The pump shall have brass impeller, high grade steel shaft with sufficient stages having outlet size of 2"/2.5"/3" dia. To suit the borewell (150 / 200mm dia.),complete. The rate includes, all taxes,freight, etc., FOR at site in puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning.(15 HP Submersible motor and pumpset).

CODE NO.31.253.1B Supplying and fixing one set wall mounting / standing type panel board of size 900mm x 300mm x 150mm of M.S. angle (30mm x 30mm x 6mm). The panel should have suitable arrangements for fixing Voltmeter, Voltmeter selector switch, Ammeter, Ammeter selector switch, 3 Nos of Indicator, 3 Nos of flush type switch, 3 Nos of flush type fuses, 3 Nos of incandescent bulbs, 3 Nos of C.T. Coil etc. including wiring with 4sqmm and 1.50 sqmm copper wire - 100 Amps TPN main switch.-15HP to 20HP

CODE NO.31.255.1C Supplying and fixing of 7.5KVAR power capacitor (CG/L&T/Siemens make) for 15 HP motor complete.

CODE NO.31.256.1C Supplying and fixing of fully automatic air break star-delta starter range for 13A to 25A F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with suitable M.S.angle frame etc., complete.- 20HP to 25HP pumpsets -(ML-1.5)

CODE NO.31.258.1B Supplying and fixing of 1x3x6 sqmm (single run) PVC insulated copper submersible flat flexible cable of Finolex make complete.-12.5HP to 20HP pumpset

CODE NO.31.259.1B Supplying of 3.5/4x50 sqmm underground cable paragon/suncab /Empire) complete.-suitable for (30HP to 40HP pumpset)/(upto 40KVA Genset).

CODE NO.31.260.1B Laying of UG cable and providing termination of cable joint with suitable cable gland,cable socket etc., complete - 3.5/4 x 50 / 3.5/4 x 70 sqmm cab

CODE NO.31.261.1 Supplying and fixing of meter board of size 600mmx900mmx150mm on suitable angle frame with suitable water proof plywood 12mm thick for receiving ED supply. The board frame shall be painted and covered on all sides by 16 gauge M.S. sheet and fixed with 3 Nos. of 100 Amps fuse carrier (Havells/Standard/Anchor make) with screws etc., complete.

CODE NO.31.262.1 Supplying and fixing of teak wood aerial board with 100 Amps HRC fuse base and fuse link and suitable post clamp to hold the G.I. Pipe with electric post including bolts and nuts etc., complete.

CODE NO.31.263.1 Making earth pit of G.I. pipe for earthing in earth pit with 40mm dia. G.I. pipe medium class of length 3.05m perforated with 46 Nos of 12mm dia. holes, pipe lowered in bore holes of 150mm dia and filled in with charcoal and salt in alternative layer of 300mm, the top of G.I.pipe shall be clamped. Earth pit shall be provided with 60cm dia precast ring with 60cm depth alround,covered with R.C.C.precast slab etc. as per I.E. standards.

CODE NO.31.264.1A Supplying and fixing of copper wire 8 SWG (4 mm dia) for earthing arrangements including bolt and nuts etc., complete.

CODE NO.31.265.1 Providing and fixing 50 mm dia GI pipe (Class B) conforming to IS 1239 (Part 1:1990) with GI fittings including trenching, refilling etc., complete for UG cable duct.

CODE NO.31.268.1C Supplying,fixing and lowering into the borewell high tensile threaded PVC column pipes which are to be Connected to the submersible pump, including labour charges,jointing materials etc.,complete.-75/80 mm dia

CODE NO.31.269.1C Supplying and fixing of C.I. adopter which is to be connected to submersible pump delivery pipe.-75/80 mm dia

CODE NO.31.270.1 Supplying and laying of 16mm dia nylon rope for holding of motors.

CODE NO.31.271.1 Supplying and laying of 40mm dia. PVC pipe (Class 3 - PN 0.6 Mpa) conforming to IS 4985 : 2000 for inserting submersible cable from borewell to starter.

CODE NO.31.272.1 Supply and fixing of 80/100mm dia. M.S. erection clamps of size 80mmx12mm with bolts, nuts, washer etc., complete.

CODE NO.31.279.1A Erection, testing and commissioning of motor and pumpset complete.The rate includes obtaining electricity service connection from Electricity Department also

CODE NO.33.27.1.1 Drilling of borewell any where in pondicherry including tranportation in alluvial soil, sedimentary strata of clay,sand stone, shale, pebbles, boulders etc. by first taking a pilot bore of 140mm / 150mm / 200mm and then enlarging to required dia by direct or reverse rotary mud circulation ethod,including fuel, labour for drilling, bentonite mud, water required for drilling at the site, contruction of mud pit (water available within a lead of 1.5Km) using rotary rig. -Upto 60 mts depth ending below ground level.

CODE NO.33.27.2.1 Reaming from 140/150 mm dia pilot bore to 300mm dia bore. Upto 60 mts depth ending below ground level.

CODE NO.33.27.7 Supplying of UPVC plain casing pipe for borewells (FINOLEX / JAIN) conforming to I.S. 12818 -1992 with relevent amendments with class designation 'CM' and with minimum wall thickness 10mm including transportation and stocking at site -200mm dia

CODE NO.33.27.10 Lowering of UPVC plain casing pipe/ribbed screen slotted pipes into the borewell including cost of cleaning material,fixing of M.S centering guide size of 25mm x 3mm thick suitable for 200mm dia UPVC pipe,including cost of labour for positioning of assembly for lowering purpose using rig.

CODE NO.33.27.13 Providing and fixing M.S. top cover suitable for UPVC pipes including the cost of materials and labour etc.

CODE NO.33.27.14 Drilling 200mm dia borehole in hard rock formation by DTH method (Down the hole hammer) inside the already inserted 200mm UPVC casing pipe.The entire column is to be cleaned at site.The rate includes hire charges for the power rig for drilling the bores,the cost of fuel Charges,transporting to and fro the power rig flushing the bore using compressor providing danger lights during night time etc.,complete.

CODE NO.33.27.16 Providing and fixing of UPVC End Cap embedded in M.S. Cone suitable for UPVC casing pipe including the cost of materials and labour for jointing.

CODE NO.NPSR The foundation brick work in cement mortor 1:4 will be constructed in 23cm wall for a height of 60cm over foundation concrete PCC 1:5:10 for a width of 60cm and 15cm thick. The inside pump shed flooring will be laid in PCC 1:2:4 to 50mm thick over a sand filling of 15cm thick and PCC 1:5:10 of 10cm thick. The outside area will be plastered in cement mortor 1:4, 12mm thick etc., complete as instructed by the Engineer-in-charge.

CODE NO.NPSR Supply of Fabricated steel Kiosk of internal dimension 2.20 x 1.90m with front and rear height of 2.40m and 2.10m respectively. The fabrication of the Kiosk is to be as per the details below: The corner pillar of the kiosk shall be single equal M.S. angle 50x50x6mm tied up at the top and bottom with 40x40x6mm angle, intermediate support of M.S. angle (2Nos) of 40x40x6mm and also same angle for bracer shall be provided. For roof 2Nos of 40x40x6mm angles provided and for front door portion an extra angle of 40x40x6mm of 2.40m is to be provided, as horizontal lintel of 0.65m of the same angle. Three numbers of 40x6mm flats for the roof of length 2.40m shall be provided. The door shall be of 0.60mx1.85m with 35x35x5mm angle on all the four sides with an intermediate horizontal angle with cross stiffener of 40x6mm flats for the doors. The roof and side of the kiosk shall be of 18SWG G.I. corrugated sheet. The rate shall included the cost of all materials, labour, fabrication charge including providing of locking arrangements for the door, painting two coats of enamel paint both side and outside the kiosk, transportation to newly erected borewell at Tsunami Quarters, Periyakalapet, Puducherry etc., as directed by the Engineer-in-charge.

CODE NO.NPSR Providing and fixing of 1.2m x 40w ISI certified street light single tube light fittings with bracket comprising of sheet aluminium canapy and with complete accessories including copper choke and ISI certified tube light etc.