Department Of Local Administration Tender

1334 Supplying and fixing of 40 mm dia. GI pipe medium class

3211 Supplying and fixing of 4 x 16sqmm armoured aluminium U.G cable - 1.1 KV grade. Make: Finolex / Polycab

11.1.1 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of size not exceeding 25sq.mm direct in ground including excavation, sand cushioning, protective covering and re filling the trench etc as required in Mud Road

3.1 Earthing with G.I.medium pipe 3.0 mt. long and 40mm dia including accessories 250 x 50 x 6 mm G.I clamp with 12mm bolt, nut and washer for connecting earth wire, RCC ring enclosure and cover plate complete as required:-

3.3 Extra for salt and charcoal for pipe earth electrode as required:-

11.15.3 Supplying and making end termination with copper gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required:4 X 16 Sq.mm

1.5.3A Supplying and drawing of 4.0 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required. Make: Havells/L&T:-

1714 Supplying and fixing of 40 amps. 4 pole isolator. Make: Siemens /ABB/L&T Hagger

3325 Supplying and fixing of 170 x 170 x 105 mm outer (140 x 140 x 95 mm inner) size PVC junction box- Sintex.

3366 Supplying and fixing of Aerial board

3267 Supplying and fixing of 25mm dia. green spring hose

3148 Supplying and fixing of 63A cutout fuse unit . Make: Kundan

1808 Supplying of 8 SWG copper wires (4.0 mm dia.)

Supply ,erection,testing and commissioning of one no of SMC Box(Make:Sintex) with metering and timer panel board for the power supply of over all size 850mmX350 X250mm made out of glasswool wit resign material.The front side top portion have energy meter with viewing glass with 10mm hylem sheet.The bottom side compartments with 40-63 A rating,TPN MCB,"C Series, 10KA breaking capacity (Make -siemens/ABB),1no.of Timer switch (Daily) along with battery backup to 200hrs. (Make-L&T - Hagger/Legrand - Lexic),1No.60A power contractor (Make - C&S/L&T)1no toggle switch (Make - C&S), The switch units are to be fixed within the alloted size in the 10mm,hylem sheet.The bottom sheet of the shell should be of PVC thick roll sheet for cable entry.The panel has to be mounted 75mmX 75mmX6mm MS'L angle on the floor within the height of 600mm. Interior Connection between the switch fuse units are to be done with 2.5/6.0/10.0sqmm. ISI marked,FR PVC insulated, single core copper conductor cable.(Make- Fiolex/Polycab) The door should be flush type inter locking in one position.The panel provided with the removable tyope gland plated to the bottom and with sufficient holes of required diameter.Earth work excavation of foundation trench of size 1.00mX0.60mX 0.60m and filling river sand for a depth of 0.10m and PCC 1:2:4,(1 Cement:two Coarse sand:4graded stone aggregate of 20mm normal size 1.00mX0.60mX1.00m.The cost should be inclusive of minor modification suitable for site condition as approved by the engineer -in-charge

1.3.17 Supplying and fixing of the following size of teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 375mmX300mmX50mm.Deep….

1.6.17 Providing and fixing of following size phenolic coated sheet on existing board:375X300X3 mm thick

1.5.1 Supplying and drawing of of 1.5sqmm.FR PVC insulated,copper conductor,single core cable in the existing surface/recessed,PVC/steel conduit/PVC casing and capping as required. Make:Finolex/Polycab:-

1.7.1.4 Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc as required. Make:Kundan/Anchor/Vinay:-

1.7.1.6 Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connections etc as required. Make:Kundan/Anchor/Vinay:-

2.2.2.1 Supplying and fixing 6 amps to 32 amps rating,Single pole,240 volts,'c' series,miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection,testing and commissioning etc as required. Make:ABB/L&T Hager