Department Of Local Administration Tender

Centring and shuttering including strutting, propping etc. and removal of form workfor - foundations, footings, bases forcolumns

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing , hoisting and fixing upto floor five level precast reinforced cementconcrete work in string courses, bands,copings, bed plates, anchor blocks, plainwindow sills and the like, cluding the cost of required centering, shuttering butexcluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Steel work welded in built up sections /framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shap laid in required colour and patter over and including 50mm thick compacted bed of course sand , filling the joints with coarse sand etc. all complete

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate

Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding allcomplete upto plinth level - Thermo-Mechanically treated bars (TISCON / IZAG/ IISCO / SAIL / JSW) Fe - 415 or more

Demolishing cement concrete manually / bymechanical means including disposal ofmaterial within 50 metres lead -nominalconcrete 1:3:6 or richer mix (i/cequivalent design mix)

Disposal of debries including loading, unloading and conveyance to low lying areas within 2km lead as directed by the Engineer in charge.

Fabrication, supply and fixing of village/ informatory name board of size1.06mts x0.61mts. The width of board is tapered at 0.80mts upto 1.06mts to give the triangular shape at one end with high intensity refelective sheeting of required colour encapusalted on alumium sheets of not less than 2mm thick suitably supported and framed with 25mm x25mmx3mm AISI 316grade stainless steel angle and the board frame is supported alround AISI 316 grade stainles steel pipe of 38mmdia (outer dia 2mm wall thickness) . The village name/street names, lettering and symbols will be provided by High intensity grade white sheeting. The Board is supported by Two Nos. of 63 mm dia post S.S pipes for 2.0mts height with same dia. Dummy plate arrangement at the top. The board frame and post pipes are welded byTig welding with necessary polishing etc.,and M.S.pipes of 50mm dia for a length of 35cm will be welded at the bottom of the posts and fixed in a ground pit of size 0.45x0.45x0.5mts with P.C.C 1:2:4. Rate includes all the materials, S.S. welding, grinding, polishing fabrication charges, conveyance etc., including Earth work and P.C.C charges, complete.

Providing and fixing in position 12 mm thick bitumen impregnated fibre board th per 100 conforming to IS : 1838 , including cost of m primer , sealing compound in expansion joints

Desilting the canal by removing silt, slush and debries from the bed of the drain removing the grass , bushes etc., complete