Department Of Local Administration Tender

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 fine aggregate : 4 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams , girders , bressumers and catilevers

Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers ,Abutments , Posts and Struts

Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars Fe - 500D or more

Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 fine aggregate)

12mm cement plaster of mix -1:4 ( 1 cement : 4 fine aggregate)

Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture's specification - Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm

Providing and fixing stainless steel (grade 304) railing made of hollow tubes,channels, plates etc., includingwelding,grinding. Buffing, polishing and making curvature (whereever required) and fittng the same with necessary stainless steel nuts and bolts complte. i/c fixing the railing with necessary accessories & stainless steeldash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement (for paymentpurpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts,fasteners etc.,)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand , filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge

Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacure

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar

Supply of 30W LED Street Light Fitting(Orbit)

Fixing testing and commissioning of Sodium vapour / Mercury vapour / Metal halide street light fittings on existing poles as required

Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required - 2 X 1.5

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive loadof following poles in the existing MCB DB complete withconnections , testing and commissioning etc .as required. -Single Pole

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc .as required. -Double Pole

Supply and fixing of 8x6 SMC PVC sintex junction box

Supply of 4Core x 4Sqmm underground aluminium cable 1.1KV grade Make: Finolex/Polycab/Orbit

Supply of 2Core x 10Sqmm underground aluminium cable 1.1KV grade Make: Finolex/Polycab/orbit

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering -upto 35 sq.mm

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 2 X 10 sq.mm (19mm)

Supply, erecting, testing and commissioning of one no of SMC Box (Make:Sintex) with metering and timer panel board for the power supply of over all size 850mmx350mmx250mm made out of glasswool with resign material. the front side top portion have energy meter with viewing glass with 10mm hylem sheet. the bottom side compartments with 40-63A rating TPN MCB “C series, 10KA breaking capcity (Make-Siemens/ABB), 1No of Timer switch daily along with battery backup to 200hrs (Make-L&T*Hagger/Legrand-Lexic), 1No 60A power contractor (Make-C&S/ L&T), 1No of toggle switch. The switch units are to be fixed within the allotted size in the 10mm hylem sheet. The bottom sheet of the shell should be of PVC thick roll sheet for cable entry. the panel has to be mounted 75mmx75mmx6mm MS L angle on the floor with in the height of 600mm. interior connection between the switch fuse units are to be done with 2.5/6.0/10.0sqmm ISI marked FR PVC insulated single core copper conductor cable (Make:Finolex/Polycab) the door should be flush type inter locking in one position. the panel provided with removable type gland plated to the bottom and with sufficient holes of required diameter earthwork excavation of foundation trench of size 1.00mx0.60mx0.60m and filling river sand for a depth of 0.10m and PCC 1:2:4(1cement two course sand 4graded stone aggregate of 20mm normal size) of size 1.00mx0.60mx1.00m. the cost should be inclusive of minor modification suitable for site condition as approved by the engineer in charge .

Providing and fixing 20 mm dia ISI marked, PVC conduit - Medium class pipe - As per IS:9537(Part 3)

Providing and fixing 40 mm dia ISI marked, PVC conduit - Medium class pipe - As per IS:9537(Part 3)