Works Department Tender

Design,Manufacture,Supply,erection,testing and commissioning of automatic stainless steel lift with ARD for 6 passenger as per direction of engineer-in-charge Travel mtr-G+1, Travel speed - 1.0 m/s Stop and opening.all opening on the same side Operation –microprocessor based simplex selective collective (with/without attendant) power supply-3 phase 415V+/-10%,50 cycles Drive-microprocessor based vvvf drive-closed loop Car panels and door-strainless steel with mirror finish Hand rails on rear side-stainless steel ceiling -SS finish with LED light fittings and regular/cross flow fan Flooring-heavy duty vinyl tilesDoor operation-automatic with electronic door director,vf door operator, sliding door N.B:- 1.combined luminous wall button and digital wall position indicator. 2.battery operated alarm bell & emergency light. 3.fire man switch at main lobby 4.integrate full height car operation panel with luminous button, digital car position indicator, annunciator combined with errors,over load warning & service cabinet. 5. anti-nuisance car call protection, auto fan cutoff 6. infrared curtain door protection,door time protection, fire rated door 7.RCCB/ELCB and MCB/MCCB of standard rating as required with enclosure as per direction of engineer in charge 8.wiring in lift well and pit with required bulkhead fittings and power points. 9.all earthing including earth pits, earth strip/wire, earth bus bar as per standard 10.Power Supply cable from Main panel at ground floor to lift machine room as per site requirement as per direction of Engineer in charge. 11.Lift should be inspected by Electrical Inspector