Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,92,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_EICCL_112314_3Tender No
CCE (R and B) BGR-06-2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling foundation and plinth with sand well watered and rammed (per Cum.)including all costs of labour, T& P etc. complete as per direction of EIC.
-
-
-
... More
i)Ground Floor
268.86
741
199491.43
... More
Providing & laying p.c.c. (1:3:6) with 40mm size black hard granite metal in including all labour, materials & royality etc. complete as per direction of EIC.
-
-
-
... More
i)Ground Floor
76.69
5784
443604.87
... More
Filling in foundation and plinth with excavated materials moorum including watering and ramming as directed by the Engineer-in-charge of earth work etc. (per 100 Cum.)
-
-
-
... More
i)Ground Floor
103
150
15501.5
... More
Brick masonry work in cm (1:6) in foundation& plinth using fly ash bricks (25cmx12cmx8cm) having minimum crushing strength not less than 35 kg /cm2 with dimesional tolerance + 8 %after immersing the bricks for six hour in water before use in F&P and S/S including splays cutting & circular mouilding, hoisting,, watering, curing etc with cost of all labour T&P for the work in all respect as per the direction of Engineer in-charge. Cost and conveyance of all materials labours all taxes T&P etc all complete.
-
-
-
... More
i)Ground Floor
25.02
5507
137799.65
... More
Providing lifting, hoisting and laying R.C.C. of M-20 Grade to base of columns and footing, columns, beams, plinth band, lintels, chajja, shaft, fins, roof slabs, balconies, stair cases, parapets, window sills, lofts, railing, jally, copping or in places as shown in the drawing for all floors with 20mm and down graded size black hard crusher broken ships of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth and curing for required period including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge.
-
-
-
... More
a)Column Base Footing
-
-
-
... More
i)Ground Floor
77.52
6275
486459.71
... More
b)Plinth beam
-
-
-
... More
i)Ground Floor(Plinth beam)
23.61
7141
168612.23
... More
c)sill band
-
-
-
... More
i)Ground Floor
0.48
13888
6666.36
... More
ii)First Floor
1.18
15604
18413.57
... More
d)Column
-
-
-
... More
i)Ground Floor
15.12
15418
233123.79
... More
ii)First Floor
10.58
17440
184522.82
... More
iii)Head Room(Second Floor)
3.38
19861
67132.58
... More
e)Lintel
-
-
-
... More
i)Ground Floor
5.45
13888
75690.91
... More
ii)First Floor
10.94
15604
170715.64
... More
iii)Head Room(Second Floor)
0.39
17658
6886.82
... More
f)Chajja
-
-
-
... More
i)Ground Floor
44.16
1205
53230.46
... More
ii)First Floor
129.79
1379
178993.39
... More
iii)Head Room(Second Floor)
1.86
1587
2952.1
... More
g)Staircase
-
-
-
... More
i)Ground Floor
2.82
15293
43128.52
... More
ii)First Floor
2.82
17291
48761.72
... More
h)Roof beam
-
-
-
... More
i)Ground Floor
23.58
15418
363562.1
... More
ii)First Floor
22.66
17440
395206.72
... More
iii)Head Room(Second Floor)
1.21
19861
24032.67
... More
i)Roof Slab
-
-
-
... More
i)Ground Floor
65.31
13453
878678.13
... More
ii)First Floor
51.74
15083
780424.95
... More
iii)Head Room(Second Floor)
3.46
17033
58934.7
... More
Supplying,cutting ,straightening of steel HYSD (Fe-500) conforming to (IS- 1786) with bending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for providing fan hooks hosting lowering ,& laying steels including cost conveyance ,taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges.
-
-
-
... More
i)Ground Floor
229.1
8772
2009694.98
... More
ii)First Floor
117.25
8804
1032374.53
... More
iii)Head Room(Second Floor)
11.43
8839
101033.31
... More
Brick masonary work in S/S in CM (1:6) including including all labour, materials & royality etc. complete as per direction of EIC.
-
-
-
... More
i)Ground Floor
71.99
5543
399070.09
... More
ii)First Floor
166.04
5914
981993.77
... More
iii)Head Room(Second Floor)
24.26
6340
153823.2
... More
Brick masonry work in cm (1:4) in superstructure using fly ash bricks (25cmx12cmx8cm) having minimum crushing strength not less than 35 kg /cm2 with dimesional tolerance + 8 %after immersing the bricks for six hour in water before use in F&P and S/S including splays cutting & circular mouilding, hoisting,, watering, curing etc with cost of all labour T&P for the work in all respect as per the direction of Engineer in-charge. Cost and conveyance of all materials labours all taxes T&P etc all complete.
-
-
-
... More
i)Ground Floor
2.49
5749
14316.75
... More
ii)First Floor
3.64
6120
22278.58
... More
Providing 6 mm thick cement plaster in cm (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tols and plants etc. complete as per the driection of the Engineer in Charge.
-
-
-
... More
i)Ground Floor
604.74
197
119714.33
... More
ii)First Floor
400.97
203
81400.92
... More
iii)Head Room(Second Floor)
19.38
208
4035.3
... More
12mm thick cement plaster in CM (1:6) to outer wall surface on brick work both side including all costs of labour etc. complete as per direction of E.I.C.
-
-
-
... More
i)Ground Floor
378.17
186
70494.67
... More
ii)First Floor
625.11
194
121302.6
... More
iii)Head Room(Second Floor)
170.3
202
34412.52
... More
16mm thick cement plaster in CM (1:6) to inner wall surface on brick masonary in side including all costs of labour etc. complete as per direction of E.I.C.
-
-
-
... More
i)Ground Floor
597.77
268
160794.15
... More
ii)First Floor
1137.8
275
313862.13
... More
iii)Head Room(Second Floor)
141.51
282
40036.01
... More
Supplying, fitting & fixing of Kota stone of minimum 16 mm thick Above 0.10 Sqm on 25mm thick bed of cement mortar (1:4) (1 cement : 4 course sand) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge.
-
-
-
... More
i)Ground Floor
72.75
957
69654.49
... More
ii)First Floor
60.21
970
58444.04
... More
Providing fitting& fixing of vitrified tile flooring of size 600x600 mm over 20mm thick Cement Mortar (1:4) bed including all costs of labour etc. complete as per direction of Engineer in Chief .
-
-
-
... More
i)Ground Floor
122.02
1184
144572.96
... More
ii)First Floor
354.67
1198
424912.39
... More
Fixing of Industrial vitrified tiles premium grade in floors on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles etc.
-
-
-
... More
i)Ground Floor
377.03
1048
395297.1
... More
Fixing tiles & Glazed /Ceramic in walls , dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles.
-
-
-
... More
i)Ground Floor
17.85
899
16055.54
... More
ii)First Floor
71.4
912
65166.07
... More
Supplying fitting, fixing of 125 mm x65mm ( after moulding ) well blend beautiful WPC ( Wood plastic composite choukath in door opening area tha wall surface of WPC Chaukaths 150mm anchor fastner screw cutting the holes filling the cutting holes in cement concrete (1:2:4) etc all complete.
-
-
-
... More
i)Ground Floor
43
720
31001.28
... More
ii)First Floor
120
720
86515.2
... More
Providing, fitting fixing of 32mm thick flush door shutter with framing 32 mm thick BWR Block Board pasted with 4 mm thick veneer on both side (Soneer African Teak) with melamine polish after cleaning the surface etc complete with all material & all labour with door closure ,godrej lock etc as per specification approved by the Department & as per direction of EIC.
-
-
-
... More
i)Ground Floor
17.22
10668
183713.46
... More
ii)First Floor
47.88
10668
510813.05
... More
Supplying fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA /NCL VEKA LTD.) Casement window with top fixed - 60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x2.5mm for outer frames , 75 mm x 60mm x 2.25 mm for casement window sash profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting single glazing system , structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed with EPDM weathering seal resistant accessories like ciipping locking system made of aluminium 1 NO. per sashes and the system is to be installed at the site using anchor fasteners rubber sealant , easy glazing / deglazing at site etc. including cost and conveyance all materials , accessories , labour charges, materials and product conforming to D 638-14 , EN -477-95 and other applicable codes and standards.
-
-
-
... More
i)Ground Floor
21.6
4960
107156.95
... More
ii)First Floor
52.65
4960
261195.07
... More
Supplying fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA /NCL VEKA LTD.) Ventilator /Top Hung - 60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x2.5mm for outer frames , 75 mm x 60mm x 2.25 mm for casement window sash profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting single glazing system , structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed with EPDM weathering seal resistant accessories like ciipping locking system made of aluminium 1 NO. per sashes and the system is to be installed at the site using anchor fasteners rubber sealant , easy glazing / deglazing at site etc. including cost and conveyance all materials , accessories , labour charges, materials and product conforming to D 638-14 , EN -477-95 and other applicable codes and standards.
-
-
-
... More
i)Ground Floor
2.4
7115
17076
... More
ii)First Floor
6.4
7115
45536
... More
Supplying, fitting and fixing of MS grill using 12mmx12mm size MS square bars, 20mm x5mm size MS flats, MS angles of approved size of grill gate PCC (1:2:4) for clamp fixing cost & conveyance of all materials, labours,T& P, all fabrication ,erction and fitting in position etc all complete.
-
-
-
... More
i)Ground Floor
1204
67
81065.32
... More
ii)First Floor
1299
67
87461.67
... More
iii)Head Room(Second Floor)
63
67
4241.79
... More
Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90 m C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case etc all complete as per direction of E.I.C.
-
-
-
... More
i)Ground Floor
120.52
331
39906.58
... More
ii)First Floor
120.52
331
39906.58
... More
Providing two coats of enamel paiting over one coat of priming including all costs of labour etc. complete as per direction of E.I.C.
-
-
-
... More
i)Ground Floor
49.46
260
12892.24
... More
ii)First Floor
59.05
271
16047.43
... More
iii)Head Room(Second Floor)
4.73
283
1340.53
... More
Wall painting Two coats with weather paint of approved shade on wall surface to give an even shade over a coat of primer including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding etc. (per one Sq. Mtr.) (Data per 10 Sqm.) including cost of materials & labour.
-
-
-
... More
i)Ground Floor
333.95
180
60434.93
... More
ii)First Floor
643.81
187
120926.83
... More
iii)Head Room(Second Floor)
190.91
195
37233.18
... More
Wall painting Two coats with plastic emulsion paint of approved shade on new work to give an even shade over a coat of primer including cost of brushes and putty including cost of paint. (per one Sq. Mtr.) (Data per 10 Sqm.) including cost of almaterial& labour.
-
-
-
... More
i)Ground Floor
1129.87
278
314951.26
... More
ii)First Floor
1465.38
284
417237.65
... More
iii)Head Room(Second Floor)
67.15
290
19532.59
... More
25mm thick Grading concrete (1:2:2) over Roof Slab including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc.as per the direction of the Engineer in Charge.
-
-
-
... More
i)Ground Floor
144.12
378
54510.51
... More
ii)First Floor
413.95
417
172646.13
... More
iii)Head Room(Second Floor)
27.68
461
12780.96
... More
Supplying fitting fixing of 100 mm dia raiwater pipe etc Complete.
-
-
-
... More
Head Room(Second Floor)
167.5
350
58625
... More
EI PORTION OF THE WORK:-Surface/Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor(Make-Havells/Polycab/Finolex/RR Kable or equievalant) of ISI marked with 20 mm dia PVC flexible non metallic conduit(Make-AKG/Polycab or equievalant) with 6A modular type switch(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) ISI marked , and ceiling rose(Havells/Anchor/equievalant) ISI marked of modular type G.I box with cover , of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.
-
-
-
... More
GROUP-A(QTRS)
124
612
75888
... More
GROUP-B(QTRS)
49.6
905
44888
... More
GROUP-C(COMMON ARAE)
49.6
1278
63388.8
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge.
25
196
4900
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.
25
547
13675
... More
Supplying,fixing of 16A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) (Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.
12
684
8208
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor FRLS, single core cable (Make-Havells/Polycab/Finolex/RR Kable or equievalant) or any other equivallent reputed make ISI marked as approved, in recessed PVC conduit Heavy duty (Make-AKG/Polycab or equievalant) of mentioned size or any other equivallent reputed make ISI marked as approved) as required as per direction of Engg.-in-Charge..
-
-
-
... More
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
300
157
47100
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
1100
171
188100
... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit . (2X4+1X2.5)
455
188
85540
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(PANEL TO BDB EACH QTR) (2X6+1X2.5)
134
220
29480
... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PANEL TO BDB EACH QTR)
44
317
13948
... More
Supplying and fixing 32 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. make for Split ac.(Make-Legrand,Schneider /Panasonic/Havells/Hagar or equievalant)
11
673
7403
... More
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required as per direction of Engg.-in-Charge.(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
-
-
-
... More
4 moudle(125mmx75mm)
3
295
885
... More
1 moudle(75mmx75mm)
3
248
744
... More
12 moudle(200mmx150mm)
3
510
1530
... More
Supplying and fixing of following sizes of medium class PVC conduit (Make-AKG/Polycab or equievalant) along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .
-
-
-
... More
20 MM
22
124
2728
... More
25 MM
22
126
2772
... More
Supply and fixing modular type indicator on the existing switch box/cover of Anchor make as required as per direction of Engg.-in-Charge.(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
12
115
1380
... More
Supplying and installation of AC starter Modular type or any other equivalent reputed make as approved coil voltage-415 Volt A.C. & O/L range of suitable range range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
11
626
6886
... More
Supplying and fixing step regulator modular type on the existing switch box including connections but excluding box etc. as required as per direction of Engg.-in-Charge.(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
25
324
8100
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. as required as per direction of Engg.-in-Charge.(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
4
213
852
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge.
12
75
900
... More
Supplying,fixing of Blanking plate(modular type) in existing switch box(including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
12
45
540
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Make-Havells/Bajaj/Usha/Cromtron or equievalant model & make.
12
3150
37800
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)
20
3724
74480
... More
SITC of energy efficient LED tube light fittings with decorative batten and LED tube light having power rating not more than 20 watt and lumen output not less than 1800 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required. Similar to wipro/philips/Havells/Bajaj or equievalant make & model.
24
728
17472
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
make-wipro/philips/Havells/Bajaj or equievalant make & model.
12
736
8832
... More
SITC of Sleek LED 18 watt surface square type fitting with extruded polycarbonate housing,High optically efficient diffuser, complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
make-wipro/philips/Havells/Bajaj or equievalant make & model.
60
1540
92400
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
34
39
1326
... More
Supplying, Erection, Fixing, connection & testing of LED top Light of elegant look Panasonic/philips/wipro or equievalant reputed make & model A catogory, ISI marked as approved 45 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light make-wipro/philips/Havells/Bajaj or equievalant make & model. reputed make A catagory ISI marked as approved having warrantied . . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
2
2145
4290
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, 1.6 mm thickness sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. , or any other equivallent A catagories reputed make ISI marked as approved as per direction of Engg.-in-Charge.
-
-
-
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator)
3
1962
5886
... More
Supply and fixing ofn 6 way DD single pole and neutral sheet steel MCB distribution board on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but without MCB/ RCCB/ Isolator) Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Equievalant model of Havells/C& S/Hagar/ ABB /L&T as per direction of Engg.-in-Charge.
3
2362
7086
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
66
143
9438
... More
Supplying and fixing 25Amps DP 240 volts, RCCB,30MA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Equievalant model of Havells/C& S/ ABB/Hagar/L&T in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
3
1710
5130
... More
Supplying and fixing 63Amps DP 240 volts, RCCB,30MA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Equievalant model of Havells/C& S/ ABB/Hagar/L&T in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
6
2242
13452
... More
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
2
2787
5574
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
122
109
13298
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.(DOUBLE RUN TO MAIN PANEL & APFC PANEL ,AC PANEL)
21
1118
23478
... More
Supplying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade of following size cables as per direction of Engg.-in-Charge.
-
-
-
... More
3.5core x 35 sq mm (main)
166
218
36256.06
... More
LAYING OF CABLE
-
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
166
176
29216
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x35 sq mm
4
400
1600
... More
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
50 mm dia
4
447
1788
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type METERING electrical main panel (for QTR) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.
1
76800
76800
... More
In commer- 01 number of 125 Amps(100-125A) 4P MCCB with 63A 4P changeover switch .(Icu=100%Ics)with shunt trip.with axulary .
-
-
-
... More
Busbar- 04 numbers of 150Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
-
-
-
... More
Out going- (i) 63A 2P MCB 5 nos with space for 6 nos 10-60A 1PH KWH Meter digital type for each quarter .
-
-
-
... More
Out going- (ii) 32A 2P MCB 02 nos with space for 1 no 10-40A 1PH KWH Meter digital type for common area.
-
-
-
... More
Out going- (iii) 25A 4P MCB 02 nos for common area,BDBL & LIFT.
-
-
-
... More
Instrument- (i) 03 numbers phase indicating lamp with HRC fuse.
-
-
-
... More
(ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication
-
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. make-Legrand/schneider/Siemens/ABB/Hagar or equievalant make & model.
4
605
2420
... More
Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Cape
66
149
9834
... More
Supply of Roof conductor holder for parapet- Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested.Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Cape
45
51
2295
... More
Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn/Cape
2
199
398
... More
Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn/Cape
2
203
406
... More
Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305.Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. Make-OBO/Dehn/Cape
2
1164
2328
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn/Cape
1
4374
4374
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp testedupto 100KA lightning current . Make-OBO/Dehn/Cape
1
2460
2460
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn/Cape
2
954
1908
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer.Tested for 100kA lightning current. Make-OBO/Dehn/Cape
4
380
1520
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn/Cape
2
277
554
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn/Cape
25
270
6750
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn/Cape
8
252
2016
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. Make-OBO/Dehn/Cape
10
261
2610
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn/Cape
2
879
1758
... More
Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO/Dehn/Cape
2
4183
8366
... More
Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn/Cape
1
887
887
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn/Cape
2
2838
5676
... More
Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn/Cape
1
2169
2169
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
12333
12333
... More
Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Terrace Pump having discharge of 180 LPM at 35 Mtr head complete with Pump Set, Electric Motor suitable for operation on 415 V ,3 ph, 50 c/s AC supply , Base Frame.
1
32500
32500
... More
Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required.
1
21500
21500
... More
Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 100 mm NB and IS 3589 for above 100 mm 6.33mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.
-
-
-
... More
100mm NB
22
2891
63602
... More
80mm NB
12
2052
24624
... More
Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C.
-
-
-
... More
100mm NB
1
5924
5924
... More
Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
100mm NB
-
-
-
... More
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge.
1
2014
2014
... More
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge.
1
2598
2598
... More
Supply,Installation,Testing & Commissioning of stainless steel strainer fabricated out of 1.6 mm thick stainless steel sheet Y Stainer with 3 mm dia hloes with stainless steel flange as required.
-
-
-
... More
100mm NB
1
15211
15211
... More
Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge.
2
8117
16234
... More
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge.
2
4032
8064
... More
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge.
2
7077
14154
... More
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.
2
5945
11890
... More
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge.
2
9781
19562
... More
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge.
2
1440
2880
... More
Providing, fitting & fixing of 2-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC.
1
5911
5911
... More
Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg with all accessories (Ever safe/Fire shield)
2
12133
24266
... More
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
1
4238
4238
... More
Providing and fixing the signages "In case of fire pull down - with Manual call point symbol ". Size 6" x 6"
2
450
900
... More
Providing and fixing the signages "In case of fire pull down - with Fire Extinguisher". Size 6" x 6"
2
450
900
... More
Providing and fixing the signages "Main fire alarm panel." Size 4" x 12"
2
650
1300
... More
Providing and fixing the signages "Assembly point - with symbol ( A2 Size)" - Size 12" x 12"
1
1250
1250
... More
Providing and fixing the signages "Entry/Exit".Size-4"x12".
1
650
650
... More
Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
-
-
-
... More
20mm dia CPVC pipes
22
260
5735.4
... More
25mm dia CPVC pipes
25
336
8420
... More
32mm dia UPVC ASTM-D pipes
12
482
5784
... More
In first floor
-
-
-
... More
20mm dia CPVC pipes
64
269
17260.8
... More
25mm dia CPVC pipes
24
345
8299.2
... More
32mm dia UPVC ASTM-D pipes
24
491
11784
... More
In second floor
-
-
-
... More
25mm dia CPVC pipes
20
356
7136
... More
32mm dia UPVC ASTM-D pipes
20
502
10040
... More
50mm dia UPVC ASTM-D pipes
110
903
99429
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
250mm thick wall-In ground floor
4
46
184
... More
250mm thick wall-In first floor
12
46
561.6
... More
250mm thick wall-In second floor
5
47
238.5
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
-
-
-
... More
In ground floor
4
154
617.6
... More
In first floor
8
155
1240.8
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
-
-
-
... More
250mm to 375mm thick wall.
33
189
6263.4
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
-
-
-
... More
In ground floor
47
166
7844.3
... More
In first floor
88
171
15109.6
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
-
-
-
... More
15mm dia CP Bib cock (Jaquar) CON-CHR-037KN
5
1428
7141.5
... More
15mm CP Long body Bib cock (Jaquar) CON-CHR-107KN
10
1428
14283
... More
15mm CP Pillar cock (Jaquar) CON-CHR-011KN
16
1580
25284.8
... More
15mm dia CP Angle stop cock (Jaquar) CON-CHR-059KN
39
1084
42287.7
... More
15mm dia CP Two way Bib cock (Jaquar) CON-CHR-041KN
6
1777
10664.4
... More
20mm dia CP Concealed Stop cock (Jaquar) CON-CHR-089KN
5
1373
6869
... More
15mm dia CP Health Faucet (Jaquar) ALD-CHR-573
6
1434
8609.4
... More
15mm dia CP Sink cock (Jaquar) CON-CHR-347KN
5
1427
7136.5
... More
3-in-one wall mixtur with over head shower (Jaquar) CON-CHR-273KNUPR
6
3838
23033.4
... More
15mm dia CP flange
30
40
1209
... More
15mm dia CP extension piece
30
59
1779
... More
125mm dia CP gratting
20
82
1654
... More
25mm dia brass fullway valve
6
926
5556.6
... More
25mm dia brass ball cock
1
928
928.2
... More
32mm dia brass fullway valve
5
1355
6778
... More
50mm dia brass fullway valve
4
2551
10205.2
... More
15mm dia CP revolving shower with arm. (Jaquar) OHS-CHR-1995
11
1835
20193.8
... More
Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge
-
-
-
... More
10 Liters capacity PVC cistern with 32mm dia flush bend
5
2834
14173
... More
Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Fixing 580mmx440mm size Orissa pan (Parryware/Hindware)
5
5296
26482
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Fixing European water closet Magna (Hindware) No.20085 (S-30)+Cist.21053.
6
5874
35245.2
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Fixing 2000Ltr Roto-moulded water storage tanks-on 2nd. Floor
5
26757
133785
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
-
-
-
... More
110mm dia U-PVC SWR pipe (Supreem/Ashirvad)
300
453
136140
... More
110mm U-PVC Door Tee
24
386
9264
... More
110mm U-PVC Plain Tee
20
322
6454
... More
110mm dia U-PVC plain shoe bend
10
232
2320
... More
110mm U-PVC Plain Bend
35
232
8120
... More
110mm U-PVC Door Bend
20
293
5872
... More
110mm dia U-PVC 'P' trap
10
497
4973
... More
110mm U-PVC Cowl.
15
58
873
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Jaquar Florentine Elbow Action make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste (Jaquar make-Allied), etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
550mmx400mm size Wash hand basin with Pedestal. (Hindware) OPAL Cat No-10082 & 11032.
4
7392
29569.2
... More
Wash hand basin with porcelain pedestal(Parryware/ Hindware/Neycer)
12
3902
46834.8
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
-
-
-
... More
Design Mirror (Parryware make)
4
1553
6214.8
... More
Fixing 600mmx450mm size B.E Mirror (fixed type)
12
657
7891.2
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
600mm Glass Shelf (Jaquar) ACN-SSF-1171N
4
1870
7480.8
... More
600mmx125mm Glass Shelf with CP/NP guard rail
12
593
7122
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
600mm long CP Towel Rail (Jaquar) ACN-ABR-1111NM
3
2067
6201.3
... More
Fixing 25mmx600mm long CP Towel Rail
8
694
5559.2
... More
CP Towel Ring
16
462
7393.6
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP Soap Holder (Jaquar) AKP-CHR-35731P
7
959
6717.9
... More
CP Soap Holder
20
175
3500
... More
Supplying all materials, labour, T&P and fitting & fixing stainless steel AISI 304 (18/8) Library/Kitchen sink with drain board as per IS 13983 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
600x450x250 mm stainless steel kitchen sink
5
4892
24463.5
... More
Supplying all materials,labour T&P and fitting and fixing of Rajashrri moulded PVC solid flush door with door frane having water & termite proof etc.including cost of all hardware fixtures etc.all complete as per direction of the Engineer-in-charge.
-
-
-
... More
11x0.75x2.10 =
17.33
5724
99202.12
... More
Supplying all materials, labour, T&P and providing Ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Ceramic tile 30cmx30cm Kajaria/Somany/Johnson to be pre-approved by the Engineer in charge)
-
-
-
... More
In ground floor
18.68
908
16965.18
... More
In first floor
52.2
918
47919.6
... More
Supplying all materials, labour, T&P and fixing Porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete 45cmx30cm Kajaria/Somany/Johnson plain/printed to be pre-approved by the Engineer in charge)
-
-
-
... More
In ground floor
58.75
886
52070.13
... More
In first floor
166.08
901
149638.08
... More
Supplying all materials, labour, T&P and fixing of Granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge
-
-
-
... More
In ground floor
3.61
2597
9375.53
... More
In first floor
14.45
2611
37740.51
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
58.75
151
8883
... More
In first floor
166.08
154
25642.75
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chipsincluding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
-
-
-
... More
1x18.68x0.08 =
1.49
5938
8847.77
... More
In first floor
-
-
-
... More
1x52.20x0.08 =
4.18
6238
26076.93
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In first floor
-
-
-
... More
5x5.00x0.60x0.08 =
1.2
6931
8317.68
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In superstructure
-
-
-
... More
5x2x0.60x0.75x0.125 =
0.56
4752
2661.51
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
R.C.C floor and roof slabs up to 4.30m height
-
-
-
... More
5x5.00x0.75 =
18.75
428
8025
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In first floor
1.2
8260
9912.48
... More
Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
-
-
-
... More
5x8.40x0.45 =
-
-
-
... More
5x6.90x0.45 =
-
-
-
... More
1x10.20x0.45 =
-
-
-
... More
Quantity as per floor tiles = (18.68+52.20=70.88)
109.9
248
27255.2
... More
Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
16.6
555
9225.45
... More
Supplying all materials,labour T&P and providing window sliding (Alluminium Louvers) type made alumunium section 9778 in window section 4095 & 4096 & 3994 in shutter frame 5mm thick glass panel fitting with rubber bending inding socket arrangement etc.all complete as per the direction of the Engineer-in-charge
-
-
-
... More
11x1.00x0.80 =
8.8
3507
30866.88
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
-
-
-
... More
Gully trap chamber of size 250mmx250mm with R.C.C cover slab
10
1418
14186
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inspection chamber Inside size 760mmx760mmx460mm
10
8394
83948
... More
addl depth of 0.15m upto 0.90m
4
1046
4187.2
... More
R.C.P.C.Cover (18" round)
10
1093
10931
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Man hole chamber Inside size 910mmx910mmx910mm
10
16424
164245
... More
addl depth of 0.30m upto 4.50m depth
2
2471
4942.6
... More
R.C.P.C.Cover (24" round)
10
1565
15655
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
RCC rings soakway pit 1.22m dia x 2.10m deep
1
16193
16193.1
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
110mm dia u-pvc pipe alround concrete
140
1119
156702
... More
160mm dia u-pvc pipe alround concrete
86.5
1851
160146.1
... More
200mmx150mm dia Tube Well through DTH Rig.-1no.
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.
-
-
-
... More
Drilling of 200mm dia bore 0mtr to 45mtr
45
782
35217
... More
Drilling of 150mm dia bore 46mtr to 120mtr
60
782
46956
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia GI/P.V.C/MS casing pipes 0 mtr to 30 mtrs
30
180
5415
... More
Lowering of 200mm dia GI/P.V.C/MS casing pipes 31 mtr to 60 mtrs
15
180
2707.5
... More
Cost of 200mm dia P.V.C schedule-80 pipe
45.6
1775
80967.36
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge.
-
-
-
... More
By DTH/Rotary Rig
1
6586
6586
... More
Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department)
-
-
-
... More
Sanitary sealing upto 5mtrs below ground level.
1
1173
1173.1
... More
CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing.
0.2
5900
1180.04
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
-
-
-
... More
40mm dia brass or gun metal Horizontal Non-return valve
1
1961
1961.2
... More
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
1 H.P single phase 3 stage head range 20 to 35 metres, discharge 145 to 110 L.P.M with outlet dia of 25mm
1
13775
13775.6
... More
DOL control panel
1
3805
3805.5
... More
2.50sqmm cable
60
128
7692
... More
32mm dia steel short piece
2
152
304.6
... More
Steel rope with cover
60
26
1602
... More
Well cap suitable for 8" bore well
1
152
152.3
... More
50mm size CI bracket
4
91
365.2
... More
20mm dia rigid UPVC pipes
75
6
517.5
... More
32mm dia rigid PVC ASTM pipes
75
243
18255
... More
40mm dia HDPE pipe
35
147
5152
... More
Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site.
1
2000
2000
... More
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
-
-
-
... More
Bore well protection chamber.
1
10062
10062.1
... More
Construction of 50 users RCC septic tank-1no.
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
-
-
-
... More
6.80x2.74x1.50=
27.95
204
5707.39
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of
-
-
-
... More
6.80x2.74x0.30=
5.59
219
1225.33
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
-
-
-
... More
6.50x2.37x0.20=
3.08
426
1312.39
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor = 6.50x2.37x0.20=
3.08
4575
14093.46
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor (inside/outside) = I/S-1x(5.00+1.60)x2.40=
31.68
155
4919.9
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor (inside/outside) = I/S-1x(5.00+1.60)x2.40=
31.68
31
1010.59
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
R.C.C floor and roof slabs up to 4.30m height
10.34
428
4425.52
... More
I/S-1x5.00x1.60=
-
-
-
... More
Buffle wall-1x2x1.60x0.732=
-
-
-
... More
R.C.C beams,columns,girder and bressmer etc.
73.5
732
53831.4
... More
I/S-1x2x(5.00+1.60)x2.40=
-
-
-
... More
O/S-1x2(5.80+2.40)x2.55=
-
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
9.39
8260
77565.16
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
11.76
6931
81513.26
... More
Base-1x5.80x2.40x0.125=
-
-
-
... More
Slab-1x5.50x2.10x0.13=
-
-
-
... More
Wall-1x14.20x0.25x2.40=
-
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
5.00x1.60x0.10=
0.8
5938
4750.48
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
1x2x1.60x1.65=
5.28
151
798.34
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In F&P = 1.60x0.25x1.50=
0.6
4752
2851.62
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
6
243
1458.6
... More
Supplying all materials, labour, T&P and fitting and fixing RCPC Cover all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
Cost of RCPC Cover (24" dia)
2
1565
3131
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
-
-
-
... More
2x(5.65+2.25)x0.15x2.40=
5.69
113
645.82
... More
30,000 Ltrs. Capacity RCC Under Ground Sump.
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
-
-
-
... More
6.00 x 4.00 x 1.50 =36.00
18.37
204
3751.15
... More
Initial lift - 6.00 x 4.00 x 0.40 = 9.60
9.6
219
2104.32
... More
Excavation of foundation in laterite rock or any hard rock (other than granite) including dressing and leveling the bed and depositing the soil as per specification approved by the Department.
-
-
-
... More
6.00 x 4.00 x 0.40 =9.6
9.6
1368
13135.68
... More
Supplying all materials, labour, T&P and filling in foundaton and plinth with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge.
-
-
-
... More
6.00x4.00x0.15=3.60
3.6
426
1533.96
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
6.00x4.00x0.15=3.60
3.6
4575
16472.88
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
R.C.C floor , walls and roof slabs
-
-
-
... More
6.00x4.00x0.20 = 4.80 cum
-
-
-
... More
2x (5.40+3.00)x0.20x2.00= 6.72 cum
-
-
-
... More
5.40x3.40x0.13 = 2.39 cum
-
-
-
... More
5.40x3.40x0.13 = 2.39 cum
13.91
6931
96415.77
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for RCC work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
1.00 qtl per cum
13.9
8260
114819.56
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
RCC Walls
-
-
-
... More
2x(5.40+3.40)x2.30=40.48
-
-
-
... More
2x(5.00+3.00)x2.00=32.00
72.48
732
53084.35
... More
RCC Slab
-
-
-
... More
5.00x3.00=15.00
15
428
6420
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
105.84
155
16436.95
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
47
31
1499.3
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
8
243
1944.8
... More
Supply all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
1 HP Open well submerssible pump set (Kirloskar make)
1
9300
9300
... More
DOL control panel
1
3805
3805.5
... More
2.50sqmm cable
15
128
1921.5
... More
Steel rope with cover
15
26
400.5
... More
20mm dia rigid U-PVC pipe
15
6
103.5
... More
Labour charges for lowering of open well pumpset with pipes and cables etc. with testing and commissioning at site.
-
-
-
... More
For installation
1
2000
2000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%