Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 3,69,900Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_EICCL_90707_1Bid Award Id
ViewTender No
CCE R and B RGDA - 03/2023Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Cement concrete of prop.(1:3:6) in foundation up to lowest bed level using hard black granite crusher broken metal of size 40 mm size down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge.
227.39
1252045
5506.16
... More
Cement concrete of prop.(1:1.5:3) in foundation up to lowest bed level using hard black granite crusher broken metal of size 12 mm size down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge.
42.88
323289
7539.39
... More
Fly ash brick masonry in cement mortar (1:6) using Fly ash bricks of “25cmx12cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
Foundation
90.93
468808
5155.71
... More
Back Filling of surplus excavated earth at work site by initial lead and lift of 1.50 mtr including cost of all labour T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
909.62
104497
114.88
... More
R.C.C.work of Grade M-20 having a minimum compressive strength in work test of 250kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 20mm down graded size black crusher broken hard granite stone chips of approved quality & from approved quarry including hoisting, lowering & laying concrete & compacting by using vibrators, watering & curing for 4 (four) weeks centring, shuttering & finishing the exposed surface smooth providing grooves or beads where necessary including cost & conveyance royalties & taxes of all materials & labour required for the work etc., complete in all respect but excluding cost & conveyance of M.S.Rods or tor steel and binding wires of 18 to 20 gauge & labour charges for straightening, cutting, bending etc.,of the HYSD Rods or tor steel & binding wires & laying the grills placing in proper position as per direction of Engineer-in-Charge.
Column Base
Ground Floor
137.42
860312
6260.46
... More
Plinth Band
Ground Floor
37.3
264053
7079.17
... More
Roof Beam
Ground Floor
44.5
713015
16022.82
... More
First Floor
37.2
674697
18137.03
... More
Second Floor
31.43
649643
20669.52
... More
Third Floor
9.83
233002
23703.24
... More
Lintle
Ground Floor
12.89
171231
13284.03
... More
First Floor
11.45
170037
14850.47
... More
Second Floor
9.83
164413
16725.65
... More
Third Floor
1.66
31491
18970.6
... More
Roof Slab
Ground Floor
85.97
1085725
12629.12
... More
First Floor
73.8
1037966
14064.59
... More
Second Floor
57.77
911760
15782.59
... More
Third Floor
9.61
171432
17838.92
... More
Stair Case
Ground Floor
3.75
52327
13954.06
... More
First Floor
3.75
58704
15654.52
... More
Second Floor
3.75
66339
17690.49
... More
Chajja
Ground Floor
78.15
87783
1123.27
... More
First Floor
77.28
98689
1277.04
... More
Second Floor
57.88
84578
1461.28
... More
Third Floor
2.64
4440
1682.02
... More
Shelves
Ground Floor
96
53066
552.78
... More
First Floor
120
73059
608.83
... More
Second Floor
96
64880
675.84
... More
Fins
Ground Floor
12.96
29273
2258.79
... More
First Floor
12.96
34068
2628.77
... More
Second Floor
12.96
39818
3072.4
... More
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment) Ground Floor
371.88
3472429
9337.5
... More
First Floor
156.22
1462709
9363.14
... More
Second Floor
128.52
1206810
9390.06
... More
Third Floor
27.58
259756
9418.31
... More
Fly ash brick masonry in cement mortar (1:6) using Fly ash bricks of “25cmx12cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.Foundation
Superstructure
Ground Floor
154.22
801026
5194.05
... More
First Floor
152.74
837279
5481.73
... More
Second Floor
133.82
777836
5812.56
... More
Third Floor
46.41
287418
6193.02
... More
Fly ash brick masonry in cement mortar (1:4) using Fly ash bricks of “25cmx12cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
Ground Floor
21.53
116025
5389.03
... More
First Floor
17.32
98320
5676.72
... More
Second Floor
13.6
81702
6007.54
... More
16mm thick cement plaster (1:6) finished smooth to inside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Ground Floor
852.05
196857
231.04
... More
First Floor
818.36
193411
236.34
... More
Second Floor
715.46
172998
241.8
... More
Third Floor
237.18
58685
247.43
... More
12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour with T& P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Ground Floor
763.6
125092
163.82
... More
First Floor
648.89
108617
167.39
... More
Second Floor
545.17
93256
171.06
... More
Third Floor
33.41
5841
174.83
... More
12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour with T& P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Inside & Out Side Plaster
Ground Floor
632.76
103658
163.82
... More
First Floor
468.26
79491
169.76
... More
Second Floor
454.73
80032
176
... More
Third Floor
231.62
42284
182.56
... More
06 mm thick cement plaster (1:4) finished smooth to inside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Roof Slab
Ground Floor
817.2
141244
172.84
... More
First Floor
714.7
126509
177.01
... More
Second Floor
557.7
101122
181.32
... More
Third Floor
68.8
12779
185.75
... More
06 mm thick cement plaster (1:4) finished smooth to Outside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Chajja
Ground Floor
104.1
17992
172.84
... More
First Floor
103.2
18554
179.79
... More
Second Floor
83.8
15677
187.08
... More
Third Floor
2.6
506
194.73
... More
Providing and laying Grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.
Ground Floor
92.3
30350
328.82
... More
First Floor
132.4
47542
359.08
... More
Second Floor
387.7
152711
393.89
... More
Third Floor
76.9
33369
433.94
... More
Providing supplying fitting and fixing of Vitrified Industrial Tiles of size 300mmx300mm in floor on 20 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
Ground floor
222.89
225789
1013.01
... More
First Floor
153.76
157379
1023.54
... More
Second Floor
153.76
159078
1034.59
... More
Third Floor
49.25
51525
1046.21
... More
Providing supplying fitting and fixing of Vitrified Tiles of size 600mmx600mm in floor on 20 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
Ground floor
296.77
341098
1149.37
... More
First Floor
308.61
357956
1159.9
... More
Second Floor
211.57
247737
1170.95
... More
Providing supplying fitting and fixing of Chequered Tiles of size 600mmx600mm in floor on 20 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
Ground floor
60.94
38827
637.15
... More
providing and laying of 80mm thick cement concrete interlocking paver block of M-30 grade and of approved make, variety , cour and size mabe by block making machine with strong vibratory compaction of approved design and shape laid in requied colour and pattern over 50mm thick compaction bed of coarses filling the joint with fine sand etc all complete including cost, conveyance, royalty, taxes of all materials all labour, T&P etc. complete in all repsect as per direction of the Engineer-In charge
274.4
226415
825.13
... More
Providing supplying fitting and fixing of Vitrified Industrial Tiles in Dadoo of size 30cmx30cm on 12 mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
Ground floor
33.13
36772
1109.96
... More
First Floor
20.11
22640
1125.81
... More
Second Floor
20.11
22974
1142.44
... More
Third Floor
5.56
6449
1159.92
... More
Providing supplying fitting and fixing of Vitrified Tiles of size 30cm x 30cm in Dadoo on 12 mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
Ground floor
34.79
43359
1246.32
... More
First Floor
25.78
32538
1262.17
... More
Second Floor
31.58
40384
1278.8
... More
Supplying fitting fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame shutters and all fittings and fixtures including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
25.2
220977
8768.94
... More
Supplying fitting fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fittings and fixtures including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
211.42
1059336
5010.58
... More
Supplying and fitting,fixing of Un-plasticised poly vinyl Choloride (UPVC) (FENESTA / NCL VEKA LTD)Ventilator / Top Hung -60 series duly manufacured using UPVC reinforced profile of 60 mm x 55 mm x 2.5 mm for outer frames 75 mmx 60 mm x 2.25 mm for casement window sash profile capable of mounting single glazing system , structurally reinforced with hot dip galavanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the widow sash shall be fitted fitted with 6 mm thick clear toughned glass of SAINT-GOBAIN Makke duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners,silicon rubber sealant ,easy glazing / deglazing at site etc. including cost and conveyance of all materials,accessories,labour charges,materials and product conforming to ASTM D 638-14 ,EN-477-95 and other applicable codes and standards.
14.4
102456
7115
... More
Dressed seasoned sal wood work framed & fixed in trusses, purlines and frames of doors & windows including cost, conveyance of all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge .
1.48
148390
100264.14
... More
Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.
52.94
570444
10775.3
... More
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
Ground Floor
56.45
517386
9165.4
... More
Supplying, of MS Doors, MS Gates made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
Ground Floor
7.57
70924
9369.16
... More
Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustarde of Size 32mmx32mmx2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification buffing polishing etc. including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
All Floor
209.01
56961
272.53
... More
Providing, Fitting & Fixing of False Ceiling with 12 mm thick gypsum board, Aluminum anodized T section No -3215 with 2ft center to center L section No-1705 up to 15micron on four walls to be fixed by means of steel screw and PVC plug and Aluminum grid 2'-0"x2'-0" suspended from ceiling including cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
111.6
103347
926.05
... More
Providing, Fitting & Fixing of carnish for gypsum board ceilling and approoved design by means of stell screw including cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
69.51
13094
188.39
... More
Providing and Finishing plastered surfaces with cement washing one coat using cement on inside plaster / concrete surface including cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
2298.05
33988
14.79
... More
First Floor
2047.32
30812
15.05
... More
Second Floor
1671.37
25605
15.32
... More
Third Floor
224.88
3508
15.6
... More
Providing and Finishing plastered surfaces with cement washing one coat using cement on Out Side plaster / concrete surface including cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
736.82
10897
14.79
... More
First Floor
614.27
9343
15.21
... More
Second Floor
582.12
9116
15.66
... More
Third Floor
343.19
5532
16.12
... More
Providing, and finishing wall and ceiling surface with water based wall putty of approved make on inside plaster/ concrete surface and finishing the surface smooth and even by sand papering including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete.
Ground Floor
2302.37
160889
69.88
... More
First Floor
2047.32
146014
71.32
... More
Second Floor
1671.37
121692
72.81
... More
Third Floor
224.88
16719
74.35
... More
Providing, and finishing wall and ceiling surface with water based wall putty of approved make on Out side plaster/ concrete surface and finishing the surface smooth and even by sand papering including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete.
Ground Floor
736.82
51488
69.88
... More
First Floor
614.27
44411
72.3
... More
Second Floor
582.12
43548
74.81
... More
Third Floor
343.19
26583
77.46
... More
Providing two coats with Weather coat paint on plaster surface of approved shade on new works over a coat of primer to give an even shade including scaffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. Ground Floor
736.82
112696
152.95
... More
First Floor
614.27
97306
158.41
... More
Second Floor
582.12
95555
164.15
... More
Third Floor
343.19
58400
170.17
... More
Painting two coat with Plastic Emulsion Paint over a coat of primer to make in even finished surfaces in all floors and heights to wall surface oa pproved make and shade including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge.
Ground Floor
2297.02
369521
160.87
... More
First Floor
2047.32
336067
164.15
... More
Second Floor
1671.37
279987
167.52
... More
Third Floor
224.88
38449
170.98
... More
Painting two coat with Synthetic Enamel paint over a coat of primer to New Iron works including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge.
Ground Floor
49.79
10749
215.9
... More
First Floor
47.5
10507
221.21
... More
Second Floor
30.56
6927
226.68
... More
Third Floor
13.46
3127
232.32
... More
Painting two coat with Synthetic Enamel paint over a coat of primer to New Wood works including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge.
Ground Floor
18.13
3996
220.46
... More
First Floor
15.54
3508
225.78
... More
Second Floor
14.24
3293
231.25
... More
EI Works
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/ Polycab/ HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider (Zencelo)/ legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materialsGroup-A. L.P.-29 F.P.- C.B.- PART-A
29
16472
568
... More
Group-B. L.P.- 58 F.P.- 22 C.B.-PART-A
80
64720
809
... More
Group-C L.P.- 28 F.P.- 23 C.B.-PART-A
61
67954
1114
... More
Group-A. L.P.- 24 F.P.- C.B.- PART-B
24
13632
568
... More
Group-B. L.P.- 46 F.P.-18 C.B.-PART-B
64
51776
809
... More
Group-C L.P.- 23 F.P.-19 C.B.-PART-B
42
46788
1114
... More
Group-A. L.P.- 19 F.P.- C.B.-PART-C
19
10792
568
... More
Group-B. L.P.- 38 F.P.- 12 C.B.--PART-C
50
40450
809
... More
Group-C L.P.- 20 F.P.-12 C.B.--PART-C
32
35648
1114
... More
Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FRLS/FRLSH PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard/Polycab) All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group-A. PART A
35
19845
567
... More
Group-A. PART B
45
25515
567
... More
PART C
35
19845
567
... More
On Existing board. PART A
25
5475
219
... More
On Existing board. PART B
20
4380
219
... More
PART C
15
3285
219
... More
Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materialsa)a)1x1.5mm2(1.19.2.SOR-17) Inverter wiringPART A
305
14945
49
... More
a)2x1.5mm2(1.19.2.SOR-17) loop wiringPART A
150
9000
60
... More
b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)PART A
310
45880
148
... More
c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)PART A
185
30525
165
... More
e)2x6mm2+ 2x2.5mm2(1.8.8.SOR-17)PART A
210
41160
196
... More
a)a)1x1.5mm2(1.19.2.SOR-17) Inverter wiringPART B
305
14945
49
... More
a)2x1.5mm2(1.19.2.SOR-17) loop wiringPART B
150
9000
60
... More
b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)PART B
310
45880
148
... More
c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)PART B
185
30525
165
... More
e)2x6mm2+ 2x2.5mm2(1.8.8.SOR-17)PART B
210
41160
196
... More
a)a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring PART C
150
7350
49
... More
a)2x1.5mm2(1.19.2.SOR-17) loop wiring PART C
125
7500
60
... More
b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17) PART C
185
27380
148
... More
c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17) PART C
65
10725
165
... More
e)2x6mm2+ 2x2.5mm2(1.8.8.SOR-17) PART C
110
21560
196
... More
S/F of 20W/18W LED batten light of crompton(slim LINEA /Dazzle ray)/ Havells/ Panasonic or Equivalent make.PART A
61
42151
691
... More
PART B
55
38005
691
... More
PART C
45
31095
691
... More
S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose.PART A
25
67
2.68
... More
PART B
15
40
2.68
... More
PART C
15
40
2.68
... More
S/F.of 9W/10Wt.LED lamps of Havels/Crompton make or Equivalent makePART A
25
3850
154
... More
PART B
15
2310
154
... More
PART C
15
2310
154
... More
S/F of B.H fitting energy saving,surface mounted decorative round plastic bulk head 1x10Wt LED luminaires comprising high brightness LED with IP54 protection.Havells Make.(ELIPSE ROUND/ ELIPSE OVAL/Rugby) as per direction of Engineer-in-charge.(terrace-2nos.)
6
9330
1555
... More
PART C
6
9330
1555
... More
S/F of 1x15W 5700K cool daywhite light surface celing LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make((ENDURA NEO DL SURFACE/ INTEGRA NEO SURFACE) \ of Havells/Crompton or Equivalent make including fixing on ceiling with grip and Connection as per direction of Engineer-in-Charge.(ext))PART A
60
111540
1859
... More
PART B
50
92950
1859
... More
PART C
40
74360
1859
... More
S/F.of 48"A.C.Ceiling fans complete with ISI marked (Havells (SS390 metallic/Havells SS390 DeCo) Usha Allure)/ Orient(Jazz/summer pride).Make or Equivalent make including all accessories & connection as per direction of Engineer-in-charge. PART A
35
89880
2568
... More
PART B
31
79608
2568
... More
PART C
18
46224
2568
... More
Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand)or equivalent make on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.
35
15225
435
... More
PART B
31
13485
435
... More
PART C
18
7830
435
... More
Providing and fixing extra down rod of 60 cm length G.I. pipe 20 mm dia heavy gauge of Downrod as per direction of Engineer-in-charge.
35
2170
62
... More
PART B
31
1922
62
... More
PART C
18
1116
62
... More
Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
35
4200
120
... More
PART B
31
3720
120
... More
PART C
18
2160
120
... More
S/F of 300mm metal exhaust fan with wall cutting including all accessories of USHA(Aero clean)/Bajaj(Bahar)/Crompton (Drift Air) make & connection as per direction of Engineer-in-charge.
10
18750
1875
... More
PART B
6
11250
1875
... More
PART C
6
11250
1875
... More
S/F.of Computer board consisting of 4Nos 5/6AMP modular socket & modular switch including suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T or equivalent make)complete with connection as per the direction of Engineer-in-Charge.
10
15150
1515
... More
PART B
4
6060
1515
... More
S/F of Modular Multipurpose board with 1nos. Of 15/16A & 6/6A modular SP switch and modular socket ncluding suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T or equivalent)complete with connection as per the direction of Engineer-in-Charge.
3
3654
1218
... More
PART B
5
6090
1218
... More
PART C
2
2436
1218
... More
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.
12
7176
598
... More
PART B
15
8970
598
... More
PART C
4
2392
598
... More
S/F of suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet with 20/25AMP SP MCB of (Hager/L&T/Legrand make) connection, painting etc as required.A.CPART A
1
713
713
... More
Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge.PART A
1
641
641
... More
S/F of 1x90W 5700K LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protection Havells make(ENDURA PLUS )/Crompton ORION NEO including all accessories,G.I bracket and connection.PART A
12
126000
10500
... More
S/F of of 4 sq.mm 2 Core Alluminium , d LT power Cable of XLPE/PVC insulated 650/1100 grade(make-Havells/Polycab)(for street light)PART A
200
10600
53
... More
of S/F of 12 way Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp TP MCCB ,9x(6-32Amp)SP MCB of Hager/ L&T/Legrand/C&S or Equivalent make make including all accessories and connection. as per direction Engineer-in-Charge.PART A
5
36005
7201
... More
PART B
5
36005
7201
... More
PART C
4
28804
7201
... More
S/f.of Standard earthing with G.I.earth pipe 4.5m long 40mm dia including all accessories (With charcoal and salt) with masonary enclosure with coverplate having locking arrangement (Sl.No.5.2.of DSR2022) as per direction of Engineer-in-charge.
2
13710
6855
... More
P/F of 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required((To be connected to DBs)PART A
30
454
15.15
... More
PART B
65
984
15.15
... More
PART C
60
909
15.15
... More
P/F of 8 SWG Copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required (to be run along with cable for earth wire)( (SOR-3.20)PART A
60
3211
53.53
... More
S/F.of Special earthing complete with provision of 600x600x3mmthick or (2ft x 2ft) copper plate, 38/40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt,funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge(1 for panel & 2 for Lift).(6 for LA)PART A
9
113598
12622
... More
Supply and laying of 25mmx5mm copper strip on surface or in recess for connection etc as required.(Connection to be made from special earth electrode to Main panel )as per direction of Engineer-in-charge.(Sl.No.3.15.of SOR-2017)( Fpr Lift & Panel)PART A
80
39349
491.87
... More
S/F of 50sq.mm 3&1/2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab or Equivalent make ) as per direction of Engineer-in-charge. (To be Connected from Floor main panel of floor160Amp)
50
16500
330
... More
Providing SITC ABC Dry Powder (Stored Pressure) 6kg capacity type Fire Extinguisher. pressurized with dry nitrogen gas at 15 bar. Design, construction and testing as per IS 15683 with Fire rating 4A 55B, Body Hydrotested at 35 bar, Operating temperature +5°C to +55°C, external epoxy powder coating with PO Red Shade No. 538 of IS 5, Supplied with standard accessories.Safex/Ceasfire/Supremex)PART A
3
7977
2659
... More
Providing SITC 4.5Kg CO2 (Wheel) Type Fire Extinguisher, Design, construction and testing as per IS 15683 with fire rating 21B. operating temperature +5°C to +55°C, supplied with body bearing IS 7285 mark and approved by CCoE tested at 250 kgf/cm2., fitted with ISI marked & CCoE approved valve as per IS 3224. CO2 Gas as per IS: 15222. externally painted with PO Red Shade No. 538 of IS 5, Supplied with standard accessories.(Safex/Ceasfire/Supremex)PART A
8
46360
5795
... More
S/F of Electrical safety acrylic chart/Poster depicted with various safety precautions , management and provides information to perform First Aid in case of electric shock etc in English and odia language with Multi color images and signPART A
3
1500
500
... More
LIGHTENING ARRESTER Supply & fixing of lightning arrester of size 2.6mtr' length made of 0.5"diameter copper rod, over which 5nos 5" length pointed copper rods of 0.3" diameter with suitable size of nuts and bolts.PART A
8
20000
2500
... More
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required including suitable insulator with proper arrangement and connection as per direction of E.I.CPART A
400
219600
549
... More
S/F of double battery of 150AH with 2KVA Inverter of Make Luminous/Exide/Sfsonic including all accessories and connection as per direction of Engineer-in-charge.PART A
1
46870
46870
... More
Fabrication of 160Amp Sub-Panel board size 48''x36''x12" with powder coat made out of SWG CR sheet with designing with (i) 200A porcelain kitkat fuse(3 nos) (ii)160A , 25kA, 4P MCCB Adjustable thermal & magenetic Legrand/ L&T/ & Hager Make.-1 nos. (iii)63A, 4P, 25kA MCCB fixed thermal & fixed magenetic hager/make/L&T/Legrand or Equivalent make .-2Nos. (iv)63A, 4P MCB C- Series Legrand / Hager / L&T Make. - 4 Nos. or Equivalent (v)63A, 4P, 25kA MCCB fixed thermal & fixed magenetic hager/make/L&T/Legrand or Equivalent make .(for lift)-2 Nos.(vi)40AMP, DP MCB C- Series Legrand / Hager / L&T Make. - 4 Nos. ( (vii) S/F.of Digital Voltmeter,Ammeter, Selector switches CT coil and Indicator lamp RYB with toggle switch etc. -1 set or Equivalent (viii)Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour. (ix)Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts. (x)15kA/20kA,3P+N SPD of L&T/Legrand make PART A
1
112433
112433.5
... More
Electrical Inspection charges for building PART A
1
13387
13387.5
... More
Supply of Insulation mats Class A insulation of size 1Mx2Mx2mm. PART A
3
8937
2979
... More
S/F of 63 Amp Panel Board size 36"×24"×12" with powder coat made of SWG Sheet with designing (i)63A, 4P, 25kA MCCB fixed thermal & fixed magenetic hager/make/L&T/Legrand -1no. (ii)100 Amp TPN Copper bus bar, (iii)63A TPN MCB(L&T/Hager/legrand)-2nos. (iv)40A DP MCB (L&T/Hager//legrand-6nos. . (v)Digital Voltmeter, Ammeter, Selector switch as per direction of Engineer-in-charge. . (Analysis Enclosed) PART B
1
41618
41618.21
... More
PART C
1
41618
41618.21
... More
PH Works
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe Ground Floor
50
13845
276.9
... More
First Floor
20
5730
286.5
... More
Second Floor
20
5882
294.1
... More
25mm dia C - PVC pipe Ground Floor
80
30272
378.4
... More
First Floor
50
19350
387
... More
Second Floor
50
19780
395.6
... More
32mm dia C - PVC pipe (Borewell to Overhead Tank)
Ground Floor
115
63445
551.7
... More
40mm dia C - PVC pipe First Floor
30
22710
757
... More
Second Floor
20
15394
769.7
... More
50mm dia C - PVC pipe (Rooftop)
30
35457
1181.9
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Jaquar)CON-CHR-053KN
52
44839
862.3
... More
15mm dia CP short body bib cock (Jaquar)CON-CHR-047KN
18
15946
885.9
... More
15mm dia CP two way bib cock (Jaquar)CON-041KN
13
16315
1255
... More
15mm dia CP long body bib cock (Jaquar Make)CON-107KN
24
34845
1451.9
... More
20mm dia CP Concealed stop cock(Plaza Make)
21
23772
1132
... More
25mm dia brass full way valve (Shakti make)
4
3718
929.6
... More
32mm dia brass full way valve (Shakti make)
6
8166
1361
... More
40mm dia brass full way valve (Shakti make)
6
10364
1727.4
... More
25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565
13
21446
1649.7
... More
15mm CP Extension piece
128
9907
77.4
... More
125mm CP grating
44
3674
83.5
... More
15mm size C.P. flange
128
6732
52.6
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width Fly ash Bricks in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite, payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank (Roof of Second Floor)(Sintex-4 Layer)
8
364028
45503.6
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. Ground Floor
10
497
49.7
... More
First Floor
6
303
50.6
... More
Second Floor
6
309
51.5
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge. Ground Floor
12
2006
167.2
... More
First Floor
8
1344
168
... More
Second Floor
8
1351
168.9
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. Ground Floor
100
17960
179.6
... More
First Floor
60
11088
184.8
... More
Second Floor
60
11454
190.9
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-A)
60
22686
378.1
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
80
39408
492.61
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
8
3978
497.3
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
18
5284
293.6
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
12
2784
232
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
12
698
58.2
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
18
5808
322.7
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
48
7684
160.1
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
580mm size Orissa pan (Hindware/Parrywaremake)
8
26594
3324.3
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. European water closet with 'S' trap plain(Hindware/Parryware/Neycer make)
13
41005
3154.3
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
21
42266
2012.7
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
Counter top basin 560mmx455mm (Parryware make) white
27
175937
6516.2
... More
550mmx400mm W.H.basin (Hindware/Parryware/Neycer) make with pedestal
3
11838
3946.2
... More
Supplying all materials, labour, T&P for fitting & fixing plain Kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
2
9857
4928.9
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
25mmx600mm long CP towel rail
21
14823
705.9
... More
Towel ring(Plaza make)
24
6237
259.9
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
600mmx125mm plate glass shelf with CP/NP guard rails.
3
1829
609.7
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled type)
3
2037
679.1
... More
Large Size mirror with Frame (7x3.0x0.75)
15.75
24809
1575.2
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
CP soap holder
39
7129
182.8
... More
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
½” x 5” CP Shower (Plaza Deluxe Make)
21
10193
485.4
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
12
2340
195
... More
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
12
1987
165.6
... More
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
Ground Floor
8.24
5631
683.4
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
Ground Floor
5.49
27234
4960.7
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
Ground Floor
5.49
35137
6400.2
... More
First Floor
4.41
29682
6729.1
... More
Second Floor
4.41
31342
7105.4
... More
RCC Slab
Ground floor. (2 x 0.60m x 3.03m x 0.13 m)+ (0.60 x2.25 x0.13)
0.65
4558
7032.3
... More
First Floor. (2 x 0.60m x 3.03m x 0.13 m)
0.47
3479
7360.4
... More
Second Floor. (2 x 0.60m x 3.03m x 0.13 m)
0.47
3657
7737.6
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge )
Ceramic tile 30cmx30cm Ground Floor
54.91
50012
910.8
... More
First Floor
44.11
40639
921.3
... More
Second Floor
44.11
41129
932.4
... More
Granite Tiles 10mm thick
Ground Floor
4.99
8913
1787.8
... More
First Floor
3.64
6538
1798.3
... More
Second Floor
3.64
6578
1809.4
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
Ground Floor
191.12
30751
160.9
... More
First Floor
146.71
24119
164.4
... More
Second Floor
146.71
24661
168.1
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 30cm x 45 cm special plain / printed series to be pre-approved by the Engineer-in-charge )
Glazed tile 30cmx45cm Ground Floor
191.12
172926
904.8
... More
First Floor
146.71
135057
920.6
... More
Second Floor
146.71
137507
937.3
... More
Supplying all materials,labour, T & P and providing brick work in super structure with KB bricks having crushing strength not less than 75 kg/cm² with dimensional tolerence ±8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty ,taxes etc all complete as per specification and direction of Engineer in charge.
Ground Floor. 5 x 0.75m x 0.60m x 0.13m
0.29
1477
5051.6
... More
First Floor
0.23
1228
5339.4
... More
Second Floor
0.23
1304
5670.1
... More
Supplying the waterproofing material Pidifin 2K of Dr.fixit or equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1’6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
First Floor
13.5
3348
248
... More
Second Floor
13.5
3348
248
... More
Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. (39 x 0.75 x 2.1) + (6 x 1 x 2.1) =
74.03
380515
5140.37
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
Aqua guard pure Chill 120 PSS UV
2
190564
95282
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
110mm dia PVC Pipe Type B
30
32739
1091.3
... More
160mm dia P.V.C. pipe
22
38781
1762.8
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
6
9243
1540.6
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
Inside size 760mmx760mmx460mm with 18” dia RCC MH cover
7
64950
9278.6
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. Man hole chamber size 910mmx910mmx910mm (18" RCC Cover )
2
36329
18164.7
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
42947
21473.8
... More
2 nos 50 Users RCC Septic tank (Size-5.00m X 2.00m X 2.10m)
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
2x6.80x2.74x1.50=
55.9
12503
223.67
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
2x6.80x2.74x0.30=
11.18
2684
240.1
... More
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge. 2x2(5.80+2.40)x2.00=
65.6
16570
252.6
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
2x6.50x2.37x0.20=
6.16
4209
683.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2x6.50x2.37x0.20=
6.16
30557
4960.7
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
63.36
10505
165.8
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
63.36
2097
33.1
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
I/S-2x5.00x1.60=
20.68
9444
456.7
... More
R.C.C beams,columns,girder and bressmer etc.
I/S-2x2x(5.00+1.60)x2.40=
147
115424
785.2
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
18.78
192185
10233.5
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
Base-2x5.80x2.40x0.25=
23.52
165423
7033.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2x5.00x1.60x0.10=
1.6
10240
6400.1
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2x2x1.60x1.65=
10.56
1736
164.4
... More
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2x1.60x0.25x1.50=
1.2
6023
5019.3
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
12
3016
251.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
2x2x(5.65+2.25)x0.15x2.40=
11.38
1400
123.03
... More
Construction of 2 No production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
Drilling of 200mm dia bore
00 mtr to 30mtr.
60
45328
755.48
... More
30 mtr to 45mtr.
30
25088
836.28
... More
Drilling of 150mm dia bore
45 mtr to 215mtr
260
144167
554.49
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
Lowering of 200mm dia P.V.C casing pipes
0 mtr to 30 mtrs
60
8292
138.2
... More
30 mtr to 45mtr
30
4146
138.2
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
200mm dia PVC (sch-80) pipe
90
147042
1633.8
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
2
2018
1009
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
By DTH Rig
2
9989
4994.8
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
Rocky terrain with boulder formation for 300m depth
4
4488
1122.11
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
1 H.P. Single phase 3 stage Vertical / Horizontal submersible pump set at head range of 20 to 35 mtr with discharge capacity 145 to 110 L.P.M With outlet dia 25mm
2
33474
16737.2
... More
DOL Control panel
2
7611
3805.5
... More
40mm dia steel short piece
2
304
152.3
... More
Well cap
2
304
152.3
... More
50mm size CI bracket
2
182
91.3
... More
2.5 sqmm flat cable
240
30744
128.1
... More
20mm dia rigid UPVC pipes
180
1242
6.9
... More
Steel rope with cover
90
2403
26.7
... More
Labour charges for lowering including transportation
2
4000
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
32mm HDPE pipes (Finolex/Supreme make)
170
16966
99.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements