Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 91,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_103868_1Bid Award Id
ViewTender No
RC(RANDB) RGD 01 /2024-2025Tender Authority
Works Department ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
DETAILED TENDER CALL NOTICE
BOQ Items
Cement Concrete of proportion (1:3:6) in foundation bed using 40mm size hard black crusher broken granite stone metal of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers in required thickness to required level ramming watering curing etc. including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge.
22.09
-
5504.4
Cement Concrete of proportion (1:2:4) using 12 mm size hard black Crusher broken granite stone metal of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6") thick to required level ramming watering curing etc. including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete including centering and shuttering, dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge.
14.25
-
7123.11
Fly ash brick masonry in cement mortar (1:6) in Foundation and plinth using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
24.51
-
5519.09
RCC work of M-20 grade in the FOOTING works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)--- Column Base
42.42
-
6648.86
RCC work of M-20 grade in the Plinth Beam works using 20mm to 10mm down graded hard black granite Crusher broken aggregates
14.37
-
6895.47
RCC work of M-20 grade in the Column & Beam works using 20mm to 10mm down graded hard black granite Crusher broken aggregates (Column-9.32 Cum
Beam - 18.32 Cum)
27.64
-
17502.92
RCC work of M-20 grade in the Lintel over the Wall/opening works using 20mm to 10mm down graded hard black granite Crusher broken aggregates
4.4
-
13611.34
RCC work of M-20 grade in the Chajja over opening works using 20mm to 10mm down graded hard black granite Crusher broken aggregates
20.97
-
1194.18
RCC work of M-20 grade in the Stair Case works using 20mm to 10mm down graded hard black granite Crusher broken aggregates
3.09
-
15016.48
RCC work of M-20 grade in the Roof Slab works using 20mm to 10mm down graded hard black granite Crusher broken aggregates
36.71
-
13172.62
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-415) steel of approved manufacturer (SAIL Only) as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
152.22
-
8709.02
Fly ash brick masonry in cement mortar (1:6) in super structure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
60.75
-
5552.42
16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
474.99
-
265.32
12 mm (1/2") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
474.99
-
183.52
6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge.
264.51
-
206.03
ALL FLOORS
Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.
(Make: WPC Door Frame: Century/Black Cobra/Rajshri Plastiwood,Colour:Coffee Brown)
(GROUND FLOOR- 92.45 Rmt
FF - 15.00 Rmt
107.45
-
1157.41
ALL FLOOR
Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge.
GF- 17.22 SQM
FF -6.93 SQM
24.15
-
10668.61
ALL FLOORS
Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 2 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 150mmx16mm tower bolt,1 No 150mm length Door handle of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.
(Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej/Dorset/Link/Dorma, Colour:Coffee Brown)
GF- 16.91 SQM
FF-1.58 SQM
18.49
-
4513.1
ALL FLOORS
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.)three track three pannel sliding window -60 series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frame and window sash of 39mm x58mm x 2.5m capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges,materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. ------ (W) etc complete as per direction of Engineer-in-Charge.(including Window Frame)
GF- 26.91 SQM
FF-17.56 SQM
44.47
-
9651.72
ALL FLOORS
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/ Top Hung – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.------ (V) etc complete as per direction of Engineer-in-Charge.
GF - 2.36 SQM
FF- 1.01 SQM
3.37
-
7115
ALL FLOORS
Supplying, fitting, fixing of all types of MS Grills / Gates / Door made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
GF-998.76 KG
FF- 552.82 KG
1551.58
-
64.38
Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge.
1307.39
-
83.52
Plastic Emulsion Paint Two coats to walls over a coat of primerof approved shade on prepared surface of new works to give a even shade with cost conveyance royalties and taxes of all the materials and all labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
692.84
-
181.66
Painting Two coat with Weather coat over a coat of primer of approved shed of approved colour over prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
354.75
-
174.77
Painting two coat of any approved S/E paint over iron over a coat of primer of approved shed of approved colour over prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
46.76
-
254.77
Supplying, fitting & fixing of Supplying, fitting and fixing Vertified Tile 600mm x 600mm plain (Ivory) of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
279.44
-
1126.82
Supplying,fitting and fixing of Vertified Tile 600mm x 600mm plain (Ivory) tiles of premium grade having thickness 7mm to 8mm conforming to Is13755 of approved make in dados on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing etc. required for the work all complete as per direction of the Engineer-in-charge
200.57
-
1158.48
providing fitting and fixing Granite tile above 0.40sqm (20mm thick) for base plate of kitchen on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of tiles including fixing tiles to proper slope / level mending to sizes including cost, conveyance, taxes and royality of all materials with all labour and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
21.01
-
2571.58
Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx 2mm @ 0.90mtr C/C and Stainless square pipe bracing of size 32mmx 32mmx 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing,etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
310
-
342.45
Providing & laying of 80mm thick cement concrete interlocking paver block of m-40 grade and approved make variety colour and size made by block making machine with strong, vibratory compaction of approved design and shape , laid in required colour and pattern over 50mm thick including cost convayance royality labour with T&P etc complete as per drawing and Technical specification and as directed by the Engineer-in-Charge
21.62
-
608.4
Providing fitting and fixing of Class-3 Rigid PVC Pipe of 125mm Dia rain water spout including cost of all materials and labour T&P etc complete in all repsect as per direction of the Engineer-In charge
3
-
491.83
In Ground Floor
2.5 cm (1") thick grading Concrete in proportion (1:2:2) using 6mm size c.b.h.g chips approved quality from approved quarry including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
193.81
-
370.2
ALL FLOORS
Providing fitting and fixing of false ceiling with Aluminium anodised T- section No.3215 with 2'-0" centre to centre, L-section No. 1705 upto micron on 4 walls to be fixed by means of steel screw and P.V.C. Plug and the Aluminium grid 2'-0" x 2'-0" with 12mm thick Prelaminated Board suspended from celling etc complete including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. including cost, conveyance, labour, T&P etc. complete for the work as directed by the Engineer-in-charge. GF- 74.00 SQM
FF- 46.00 SQM
120
-
993.62
ALL FLOORS
Providing fitting and fixing of carnish for gypsum board ceilling and approved design by mean of stell screw including cost , conveyance, taxes etc complete including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. including cost, conveyance,labour, T&P etc. complete for the work as directed by the Engineer-in-charge. GF- 42.00 RMT
FF- 42.00 RMT
84
-
166.01
1st Floor (Head Room)
RCC work of M-20 grade in the Column and roof beam works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
7.29
-
19990.13
1st Floor (Head Room)
RCC work of M-20 grade in the Lintel over the Wall/opening works using 20mm to 10mm down graded hard black granite Crusher broken aggregates
1.29
-
15320.29
1st Floor (Head Room)
RCC work of M-20 grade in the Roof slab works using 20mm to 10mm down graded hard black granite Crusher broken aggregates
12.48
-
14793.73
1st Floor (Head Room)
RCC work of M-20 grade in the Chajja works using 20mm to 10mm down graded hard black granite Crusher broken aggregates
6.41
-
1367.14
1st Floor (Head Room)
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-415) steel of approved manufacturer (SAIL Only) as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
20.63
-
8741.66
In First Floor (Headroom) Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
35.87
-
5921.69
In First Floor (Headroom) 16 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
198.04
-
272.15
In First Floor (Headroom) 12 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
198.04
-
191.13
In First Floor (Headroom) 6 mm thick Cement Plaster (1:4) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
99.83
-
211.39
In First Floor (Headroom) Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge.
495.91
-
85.37
In First Floor (Headroom) Plastic Emulsion Paint Two coats to walls over a coat of primerof approved shade on prepared surface of new works to give a even shade with cost conveyance royalties and taxes of all the materials and all labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
328.84
-
185.77
In First Floor (Headroom) Painting two coat with approved weather seal coat over a coast of water bound wall cement primer of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
167.07
-
181.6
In First Floor (Headroom) Painting Two coats with any approved synthetic Enamel paints of approved colour, shade over a coat of primer over new iron work including sand papering, polishing the surface, cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
33.94
-
261.41
In First Floor (Headroom) 2.5 cm (1") thick grading Concrete in proportion (1:2:2) using 6mm size c.b.h.g chips approved quality from approved quarry including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
99.83
-
408.88
In First Floor (Headroom) Supplying, fitting & fixing of Supplying, fitting and fixing Vertified Tile 600mm x 600mm plain (Ivory) of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
62.34
-
1139.99
In First Floor (Headroom) Supplying,fitting and fixing of Vertified Tile 600mm x 600mm plain (Ivory) tiles of premium grade having thickness 7mm to 8mm conforming to Is13755 of approved make in dados on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing etc. required for the work all complete as per direction of the Engineer-in-charge
55.81
-
1178.3
Internal P.H work
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 of the following nominal bore, tube fittings and clamps including making the wall good. ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
20mm dia PVC Pipe (Sch-80)
Ground Floor
40
-
175.5
First Floor
30
-
183.8
25mm dia PVC Pipe (Sch-80) (Water Supply)
50
-
244.8
32mm dia PVC Pipe (Sch-80)(Top Foor)
20
-
343.1
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Jaquar)CON-CHR-053KN
17
-
861.3
15mm dia CP long body bib cock (Jaquar)CON-CHR-107KN
4
-
1451.9
15mm dia CP Short body bib cock (Jaquar Make)CON-CHR-037KN
2
-
1107.4
20mm dia CP concealed stop cock (Jaquar Make)CON-CHR-83KN
1
-
1132
25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 573
6
-
1648.7
15mm dia CP two way bib cock (Jaquar)CON-041KN
6
-
1255
25mm dia Brass full way valve (Shakti make)
2
-
1211
32mm dia Brass full way valve (Shakti make)
1
-
1774.2
CP Extension piece
30
-
52.6
125mm CP Grating
16
-
87.1
C.P. Flange
30
-
77.4
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank at roof of (First floor) (Sintex -4 Layer)
1
-
46964.8
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
Ground Floor
8
-
61.8
First Floor
4
-
63
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
Ground Floor
4
-
211.8
First Floor
6
-
212.8
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
Ground Floor
43.89
-
212.4
First Floor
30
-
219.3
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
48
-
514.5
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
2
-
497.3
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
8
-
293.6
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
8
-
232
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
6
-
407.4
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
6
-
58.2
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
6
-
322.7
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
6
-
386
110mm U-PVC Socket plain (Ori Plast/Finolex/Supreme Make)
20
-
160.1
Supplying all materials, labour, T&P and fixing vitreous china water closet,European wc) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
Orissa pan (580mmx450mm)(Hindware/ Parryware/ Neycer make)
2
-
3731.7
Supplying all materials, labour, T&P and fixing vitreous china water closet,European wc) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
European water closet (Hindware/Parryware/Neycer make)
6
-
3228.5
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Magnum urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
2
-
5894.5
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
8
-
2365.7
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.
550mmx400mm W.H.basin (Hindware/Parryware/Neycer) make
4
-
4000
Counter Top Basin (560x455) (Perryware/Hindware/nycer Make) white with 15mm C.P. Pillar cock (jaquar/essco)
6
-
4017.5
Supplying all materials, labour, T&P for fitting & fixing plain Kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
1
-
5902.4
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
CP towel rail (Plaza/ Johnson Make)
8
-
901
Towel ring (Plaza/ Johnson Make)
10
-
648.1
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
600mmx125mm plate glass shelf with CP/NP guard rails.
4
-
694.6
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
450mm X 600mm size BE Mirror Wallmount (Best quality)
4
-
803.4
Large size Mirror=2 X 1.80m X 0.90m=
3.24
-
1671.9
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.
CP soap Dish
10
-
279.6
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
10
-
235.4
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
6
-
147.6
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
Ground Floor
3
-
662.8
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
Ground Floor
3
-
5568
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. Ground Floor
1.47
-
7209.9
First Floor
2.26
-
7635.7
R.C.C slab
0.6
-
8125.3
Supplying all materials, labour, T&P and providing and fixing vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )
Ceramic Tile 30cm x 30cm
Ground Floor
i) Chamber A. Toilet-1:- - 1 X 1.80m X 1.12m= 2.02
ii) Chamber A. Toilet-2:- - 1 X 1.80m X 1.25m= 2.25
iii) Her Toilet Block
Toilet:- - 3 X 1.12m X 1.50m= 5.04
Wash Area:- -1 X 3.62m X 1.80m= 6.52
iv) Him Toilet Block
Toilet:- - 1 X 1.55m X 1.12m= 1.74
Wash Area:- - 1 X 1.55m X 1.80m= 2.79
Wash:- - 1 X 1.50m X 1.55m= 2.33 Total = 22.67
22.67
-
903.6
First Floor
i) Dormitory Toilet Block (Her)
Toilet-1:- - 1 X 1.80m X 1.25m= 2.25
Toilet-2:- - 1 X 1.80m X 1.12m= 2.02
Bathroom:- - 1 X 1.80m X 1.25m= 2.25
Wash Area:- - 1 X 2.93m X 1.12m= 3.28 - 1 X 1.00m X 1.37m= 1.37 Total = 11.17
11.17
-
916.9
Granite Tile
1.08
-
1836.1
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
Ground Floor
98.46
-
196.6
First Floor
51.36
-
201.2
Supplying all materials, labour, T&P and providing and fixing vitrified wall tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
A. Vitrified Wall Tiles 45cm x 30cm
Ground Floor
Chamber A. Toilet-1:- - 1 X 2(1.80m + 1.12m) X 2.10m= 12.26
Chamber A. Toilet-2:- - 1 X 2(1.80m + 1.25m) X 2.10m= 12.81 25.07
Deduction:-Door -D2 - 2 X 0.75m X 2.10m = 3.15 S. Total = 21.92
iii) Her Toilet Block
Toilet:- - 3 X 2(1.12m + 1.50m) X 2.10m=33.00
Wash Area:- - 1 X 2(3.62m + 1.80)m X 2.10m=22.76 = 55.76
Deduction:- Door-D2 - 7 X 0.75m X 2.10m = 11.03 S.Total = 44.74
iv) Him Toilet Block
Toilet:- - 1 X 2(1.55m + 1.12m) X 2.10m=11.21
Wash Area:- - 1 X 2(1.55m + 1.80)m X 2.10m=14.07 = 25.28
Deduction:-Door- D2 - 3 X 0.75m X 2.10m = 4.73 S Total = 20.56
v) Wash:- - 1 X 2(1.50m + 1.55)m X 2.10m= 12.81
Deduction:- Door- D2 - 1 X 0.75m X 2.10m = 1.58 S.Total = 11.24
98.46
-
904.1
First Floor
Toilet-1:- - 1 X 2(1.80m + 1.25m) X 2.10m= 12.81
Toilet-2:- - 1 X 2(1.80m + 1.12m) X 2.10m= 12.26
Bathroom:- - 1 X 2(1.80m + 1.25m) X 2.10m= 12.81
Wash area:- - 1 X 9.72m X 2.10m = 20.41 = 58.29
Deduction:- Door- D2 - 6 X 0.75m X 2.10m= 4.73 D1 - 1 X 1.05m X 2.10m= 2.21 = 6.93 Total = 51.36
51.36
-
923.9
Providing fitting, fixing of Aluminium door with anodized AL. Flush door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 D2=12 X 0.75m X 2.10m=
18.9
-
5140.37
Supplying all materials labor T&P and fitting & fixing 40mm to 50mm thick marble partition tile including cutting grooves and mending good the damages with cement plaster (1:3) jointed with neat cement slury mixed with pigments to match the shades of the tile including rubbing and polishing all complete as per specification and direction of the Engineer in charge. 2x 0.80m x 1.20m=
1.92
-
864
Fitting & fixing of Aquagurad Cooler Cum Purifier for drinking water privision. 1no
i) Cost of Aquaguard Cooler - Cum Purifier
1
-
48500
External P.H. Work
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge.
i) 110mm dia P.V.C. pipe
20
-
1273
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge.
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
3
-
10456.8
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
3
-
1720.1
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. i) Man hole chamber size 910mmx910mmx910mm (18" RCC Cover )
2
-
20356.4
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
1
-
24253.7
1 no 30 Users Septic Tank
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
12.82
-
291.75
Earth work in excavation of foundation in all kinds of soil above 1.5m lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
5.39
-
313.18
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per the specification and direction of Engineer-in-charge.
0.68
-
5568
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per the specification and direction of Engineer-in-charge.
1.56
-
7029.9
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per the specification and direction of the Engineer in charge.
0.61
-
7898
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
0.49
-
9062.3
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
RCC floor, roof slab chhaja up to 4.430 m height
4.47
-
753.6
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per the specification and direction of the Engineer in charge.
5.76
-
5892.7
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per the specification and direction of the Engineer-in-charge.
39.3
-
207.8
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
16.17
-
40.3
Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
5
-
278.4
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
2
-
420.1
Supplying, filling sand in foundation & plinth of Structure as per drawing & Technical Specification, with sand of approved quality from approved quarry in 23.5cm (9") thick layers including watering and ramming with cost, conveyance royalties, taxes of all the materials and labour with T&P required for the work etc. complete as per section 2100 of MORT&H specification for Road and Bridge works ( latest revision) as per drawing and Technical specification and as directed by the Engineer-in-Charge (Measurement shall be taken on finished compacted section only).
4
-
662.8
AS PER CHIEF ENGINEER, RWS&S. ODISHA BHUBANSWER INDICATIVE RATES VIDE LETTER. NO. PB.340 DT.31.5.2010 AND Lr. No. 7050 DT 05.10.2010
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 125mmdia G.I/P.V.C/M.S casing pipes for housting fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well),
Drilling of 125mm x 100 mm dia bore 00 mtr to 30mtr
30
-
430
Drilling of 100 mm dia bore
38 mtr to above
70
-
415
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
Lowering of 125mm dia P.V.C casing pipes
00 mtr to 30mtrs
30
-
60
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
125mm dia PVC (sch-80) pipe
30
-
831.3
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge.
By DTH Rig
1
-
1000
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
Rocky terrain with boulder formation for 300m depth
2
-
1122.11
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) a) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
1
-
16737.2
DOL Control panel
1
-
3805.5
40mm dia steel short piece
1
-
152.3
Well cap
1
-
152.3
50mm size CI bracket
1
-
91.3
2.50sqmm flat cable
90
-
128.5
20mm dia rigid UPVC pipes
45
-
6.9
Steel rope with cover
45
-
26.7
Labour charges for lowering including transportation
1
-
2000
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge32mm HDPE pipes (Finolex/Supreme make)
90
-
99.8
ELECTRICAL PORTION Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch legrand( Arteor) /Panasonic (vision) ,Anchor ( Roma) or equievalant reputed make & model ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard) Group-A L.P- 35 F.P-
35
-
547.5
Group-B L.P- 45 F.P- 20
65
-
840.12
Group-C L.P- 10 F.P- 13 C.B.P-2
25
-
1211.71
Supply and fixing of 3 pin 6Amp plug with 6Amp switch on existing board Modular switches connection (make-Anchor/ Legrand /Roma) ( 5A Exixting)
10
-
242.33
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, etc. as required. ( 5 A Separate)
7
-
546.6
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches (make-Anchor/ Legrand /Roma ( 15 APower plug )
5
-
683.46
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 02 No.s of 3 Pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required..Modular switches (make-Anchor/ Legrand /Roma) (2x2 5A switch shocket board)
10
-
884
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 01 No.s of 6 pin 15/16A modular socket outlet and 15/16 A modular switch & and 01 no. of 5/6 A modular socket outlet and 5/6 A modular switch , connections etc. as required.Modular switches make-Anchor/ Legrand /Roma) (5+15 A switch shocket board)
2
-
1071.2
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 02 No.s of 6 pin 15/16 A modular socket outlet and 5/6 A modular switch, connections etc. as required.Modular switches (make-Anchor/ Legrand /Roma) (15+15 A switch shocket board)
2
-
1172.85
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 03 No.s of 6 pin 5/6 & and 01 no. of 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. ( 15+3x5 A multi purpose Board)
5
-
1565.28
S/F of suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet with 20/25AMP SP MCB of (Hager/L&T/Legrand make) connection, painting etc as required.A.C
10
-
488
Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge.
10
-
655
Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard)---- 1 X 1.5sqmm
190
-
59.02
2x2.5 sqmm
35
-
82.27
2 x 1.5 sq.mm
125
-
69.28
2 X 1.5sq.mm +1 X 1.5sqmm
65
-
156.71
2 X 2.5sq.mm +1 X 1.5sqmm
395
-
170.67
2 X 4sq.mm +1 X 1.5sqmm.
245
-
188.04
(4 x 6 sq.mm + 2 x 2.5 sq.mm)
45
-
316.54
S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose
16
-
22.57
Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.
2
-
11794
P/F of 8 SWG Copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required (to be run along with cable for earth wire)( (SOR-3.20)
25
-
53.53
Providing and fixing 25 mm X 5mm copper strip on surface or in recess for connection etc as required.
8
-
1009
Supply and fixing of Modular fan regulator, cll bell push, TV Socket Outlet(Cona/ Anchor/ Usha/Bajaj)
Electronics step type Regulator (Modular type)
23
-
304.32
Providing and fixing extra down rod of 60 cm length G.I. pipe 20 mm dia heavy gauge including Cutting & threading of Downrod as per direction of Engineer-in-charge.
19
-
94
Supplying and fixing of Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing of Modular Bulbul Callbell of ROMA or Equivalent make with connection, painting etc as required.
1
-
471
Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator)
4 WAY, DOUBLE DOOR
1
-
1244.21
12 WAY, DOUBLE DOOR
1
-
1942.01
4 WAY (4 + 12) DOUBLE DOOR, HORIZONTAL TYPE
2
-
4384
Supply and fixing of 5Amp to 32A rating 240V "B/C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)
Single pole (SP)
36
-
336
63 A Triple Pole Neutral (TPN)
3
-
3287
20 watt LED T-5 fitting( Make-Bajaj/ Philips /Crompton)
36
-
623.78
S/F of 1x15W 5700K cool daywhite light surface / Recess celing LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make((ENDURA NEO DL SURFACE/ INTEGRA NEO SURFACE) \ of Havells/Crompton or Equivalent make make including fixing on ceiling with grip and Connection as per direction of Engineer-in-Charge.(ext)
62
-
1350
S/F of 18 Watt LED Square/Round surface mount fitting (Make-Havells/Philips/C&S/Crompton)
4
-
1931.36
Supply and fixing of 9Watt LED Lamp (Philips/ Havells/ AnchorBajaj)
16
-
154
LED Bulk head Light fitting (1000 Lumen) of make BAJAJ .(CAT No:BIBWP 10W LED)/ Equivalent /Philips/Lighting Technologies.
1
-
1723
S/F of 90 W LED street light fitting (Make-Crompton /Havels /Philips /Bajaj)
1
-
10949.23
S/F of 60 W LED street light fitting (Make-Crompton /Havels/ Philips /Bajaj)
2
-
6440.3
S/F of 45 W LED street light fitting (Make-Havels/Philips/Bajaj)
3
-
4306.5
Supply & Installation of surface LED Luminarie of Mirror Light (6W) of make JAQUAR/ Equivalent of Philips/bajaj/ Wipro.
2
-
791
S/F of 1200mm sweep energy efficient 5 star rated BLDC Ceiling fan (Make- Crompton Energeon Riviera Regulator or equivalent model of Havells/ Bajaj or other reputed make)
23
-
4413.04
S/F of Wall Mounted Fan including all accessories of USHA(Mist Air Icy Blue)/Crompton (Wall Mounted Fan-High Flo LG 18") make & connection as per direction of Engineer-in-charge.
2
-
2273
S/F.of 600 mm high speed Ceiling Fan,(Havells /Usha Striker)/ Orient
1
-
2519
Exhaust fan 9" size
2
-
2089.56
300 mm sweep fibre body fresh air fan
7
-
1600
S/F of 25 sq.mm 3&1/2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab) as per direction of Engineer-in-charge.
40
-
201
S/M of end termination with brass compression gland and Al. lugs for 4 Core 25 mm2 PVC insulated and PVC sheathed/XLPE Al. cable of 1.1kV as per direction of Engineer-in-charge.
2
-
173.72
Fabrication of 100Amp Main Panel board size 48"x36"x12" with powder coat made out of SWG CR sheet with designing with (i)100A , 25kA, 4P MCCB Adjustable thermal & magenetic Legrand/ L&T/ & Hager Make.-1 nos. (iii)100A 4P onload changeover of Legrand/L&T/ Hager/C&S make (ii)63A, 4P MCB C- Series Legrand / Hager / L&T Make. - 3 Nos. (iv)40AMP, DP MCB C- Series Legrand / Hager / L&T Make. - 4 (vi) S/F.of Digital Voltmeter,Ammeter, Selector switches CT coil and Indicator lamp RYB with toggle switch etc. -1 set (vii)Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour. (viii)Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts. (ix) 250Amp TPN Cu. busbar-1set
1
-
48106.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements