Works Department Tender

(ii) Approach Road

Cement Concrete of prop.(1:3:6) in foundation up to lowest bed level using crusher broken hard black granite metal of size 4cm down graded of approved quality from approved quarry as per approved design including hosting ,lowering ,laying compacting concrete in layers not exceeding 6"thick ,watering ,curing for three weeks shuttering the exposed surfaces ,finished smooth ,providing grooves of beads where necessary including cost ,conveyance ,royalty & taxes of all materials ,with labour T&Prequired for the work etc.complete in all respects including dewatering if required as per direction of engineer-in -charge. (i) Compound Wall

Cement Concrete of prop.(1:4:8) in foundation up to lowest bed level using crusher broken hard black granite metal of size 4cm down graded of approved quality from approved quarry as per approved design including hosting ,lowering ,laying compacting concrete in layers not exceeding 6"thick ,watering ,curing for three weeks shuttering the exposed surfaces ,finished smooth ,providing grooves of beads where necessary including cost ,conveyance ,royalty & taxes of all materials ,with labour T&Prequired for the work etc.complete in all respects including dewatering if required as per direction of engineer-in -charge. (i) Approach Road

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRT&H specifications for Road and Bridge works (Latest Revision). (i) Approach Road

Supplying and fixing of pre cast inter locking concrete block 60mm thick with crushing strength as per drawing and technical specification clause 1504 of MORTH and specification 6919-11-1986 with all cost of materials, labour, carriage etc complete (i) Approach Road

Providing fly ash brick masonary work in foundation and plinth using 230mm x 110mm x 80mm (with dimensional tolerance of +85%)fly ash bricks having crushing strength not less than 75kg/sq cm,mortar of mix 1:6 (1cement :6 sand ), immersing the brick for minimum 6hrs in water before use with all necessary projections supply cutting, circular moulding, corbelling etc. including cost of all materials, labour, conveyance, loading and unloading taxes, cess royalties, scaffolding, watering curing sundries tools and plants, etc. complete as per the direction of the Engineer -in -charges. (i) Compound Wall

Fly ash brick masonary in cement mortar (1:6) in super structure using fly ash brick of Size (25 x 12 x 8 cm) having a crushing strength of not less than 75kg /cm2 incl.splays cutting circular moulding chmfering and corbelling watering and curing etc. complete incl.cost and conceyance of all materials and labour with T&P required for the work with all taxes and royalties etc complete in all respect or as directed by the engineer -in -charges .having a crushing having a crushing strength not less than 50kg/sq including splays cutting, circular moulding, Chmfering and Corbelling Watering and curing etc. complete including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc.complete in all as per the respect or as directed by the Engineer -in -charges. (i) Compound Wall

Providing 12 mm thick cement plaster (1:6) (1 cement : 6 sand) to outside plastered surface/ plumped surface of masonary, racking out joints, cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalities, scaffolding, watering, curring, sundries, tools and plans etc complete as per direction of E.I.C. (i) Compound Wall

(ii) Approach Road

Provoding lifting ,hosting and laying reinforced cement concrete of M-20 grade to the following member or in places as shown in the drawing for allfloor with 20mm and down graded size black hard crusher broken granite chips of approved quality from approved quarry incl. mixing and vibro compacting to proper shape and size ,level and plumb and finishing the exposed surface smooth (if required by grouting /providing plaster with cement mortar 1:4 wherever necessary without any extra cost )scaffolding ,including watering and curing for the required periode incl. providing strong rigid ,levelled and pumpbed centring and shuttering to required shape and size ,floors with wooden or steel centring materials ,with all necessary bracing and ties and supports with level centring covered with bituminous paper with provision of necessary holes and pockets for electrical conduits ,pipes ,PH,pipes ,for hooks or boxes ,switchboard and insert plates clamps and extension bars etc. incl. dismantling the same after the required interval from the date of casting ,incl. cost of all materials ,labour ,conveyance ,loading and unloading taxes cess ,royalty ,scaffolding ,watering ,curing ,sundries tols and plants etc. as per direction of the engineer -in -charges but excluing cost of mmaterilas and labour reinforcement . (A) Column Base (i) Compound Wall

(B) Plinth Bend (i) Compound Wall

(C) Column (i) Compound Wall

Supplying,cutting, straightening coiled or bent up M S Rod or of steel of primary steel products such as SAIL / Tiscon / RINL (grade Fe- 500 D) etc bending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in position as required for the RCC work & for providing fan hooks hosting lowering & laying steels including cost conveyance, taxes & royalties of all materials and binding wires of 18 to 20 gauge & labour required for the work for bending, binding and tying the grills in all floors with labour cess etc (payment will be made on standard weight of BIS for MS Rod or steel only)etc complete as per specifiaction & direction of Engineer in charges. (i) Compound Wall

Supplying of M.S. grill / door / window / grill gate / collapsable grill made out of structural steel, flats, plates, angle etc. including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge. (i) Compound Wall

Wall painting two coats with weather seal coat of approved shade on new work by means of brush including watering and curing etc. complete including cost of paint with taxes and cost of all labour with T & P required for the work etc. complete. (i) Compound Wall

(ii) Approach Road

Painting three coats in all floors (Two coats with paints of approved shade and base coat with primer) to new steel work including sand papering, polishing the surface including cost conveyance taxes and royalties of all materials and with T & P required for the work including cost of paints and primer complete in all respect as per direction of Engg-in-charge. (i) Compound Wall

Construction of embankment with approved materials obtain from borrow pits within 5 Km. lead by mechanical means to site spreading, grading required slope & compacting to meet the requirement of table -300-2 & clause 305 of MORTH specification for Road and Bridge work (Latest Revision) (i) Compound Wall