Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 96,400Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Extension Of Superintending Engineer R And B Division Office At Balliguda In The District Of Kandhamal For The Year 2024-25. Composite Tender
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_105792_1Bid Award Id
ViewTender No
SE-BLG-08/2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Conveyance of excaveted earth by mechanical means within 50m initial lead & 1.5 mtr. lift etc all complete.
74.39
247
18439.05
Filling F & P with excavated earth. including cost of all materials and labour etc complete.
151.05
148
22408.27
Providing & laying Plain Cement Concrete (1:3:6) using 4cm size metal etc. complete including all labour, materials & royality etc. complete as per direction of EIC.
34.18
6594
225400.01
Providing lifting, hoisting and laying R.C.C. of M-20 Grade to base of columns and footing, columns, beams, plinth band, lintels, chajja, shaft, fins, roof slabs, balconies, stair cases, parapets, window sills, lofts, railing, jally, copping or in places as shown in the drawing for all floors with 20mm and down graded size black hard crusher broken ships of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth (if required providing plaster with cement mortar (1:4) wherever necessary without any extra cost) including rigid smooth centering and shuttering, scafolding, watering (excluding reinforcement bars) and curing for required period including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. (Ground Floor)
Column Base & Footing
32.26
7079
228378.22
Plinth Beam
9.54
7944
75792.82
Column in super structure (Ground floor)
6.04
16198
97837.13
first floor
6.04
18215
110020.41
Head room
2.53
20629
52193.65
Lintel Band (Ground floor)
3.63
14682
53296.39
first floor
3.89
16396
63780.44
head room
1.01
18446
18631.17
Roof Beam( ground floor)
9.54
16198
154530.83
First floor
10.05
18215
183063.77
head room
1.9
20629
39196.81
Roof slab (ground floor)
19.27
14244
274483.81
First floor
19.16
15870
304078.78
head room
4.34
15870
68877.97
Stair case
4.79
16075
76999.73
First floor
4.79
17401
83353.66
Chajja (0.0625mtr. Avg.thick) Ground floor)
9.84
1265
12447.6
First floor
12.2
1438
17549.7
Supplying,Cutting straightening of steel HYSD (Fe- 415) conforming to (IS- 1786) with bending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for providing fan hooks hosting lowering ,& laying steels including cost conveyance ,taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges.(Ground floor)
106.33
8655
920342.5
First floor
61.38
8688
533279.87
head room
14.04
8722
122463.06
Fly Ash Brick Masonary of sze(23x11x8 cm )in CM(1:6) in F&P including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge.(Ground floor)
39.57
5731
226780.42
First floor
65.43
6133
401329.3
Fly Ash Brick Masonary of size (23x11x8 ) cm in CM(1:6) in S&S including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge.
59.17
5764
341082.51
Head room
25.54
6558
167501.03
Supplying, fitting and fixing M.S. Grill made out of structural steel, flats, plates, bars confirming to IS for windows, ventilators etc. as per drawing and design, fixed to walls with clamps including priming 1 coat with all kdamages in walls and floors etc. including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc.as per the direction of the Engineer in Charge. (Ground floor)
1150
57
66205.5
First floor
675
57
38859.75
Head room
160.2
57
9222.71
Painting two coats with enamel paint including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc completes in all respects as per the direction of Engineer charges. (ground floor)
57.03
258
14753.66
First floor
33.76
265
8959.9
Head room
8.02
272
2183.04
Labour for fitting, fixing of MS Shutter & Grill (ground floor)
34.5
68
2348.42
First floor
27
68
1837.89
Head room
3.88
68
264.11
Supplying,fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors,windows and ventilators with cost ,conveyance,royalties and of all materials with all labour T&P etc. required for the work complete in all respect as per direction of Engineer-in-Charge. (Ground floor)
0.39
83379
32517.85
First floor
0.39
83379
32517.85
Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engineer-in-Charge. (ground floor )
10.44
10668
111380.29
First floor
9.98
10668
106472.73
Supplying & fitting - fixing up of Un-Plasticised Poly Vinyl Choloride (UPVC) (FENESTA) /NCL VEKA LTD ) Casement window with top fixed -60 Series dully manufactured proofing of 60mmx55 mm x2.5mm for outer fframes 75mmx60mmx2.25mm for casement window sash profile and 74mm x60 mmx2.5 mulion profile capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness 1.5 mm prefabricated and welded through fusion welding the door sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBIN make duly fitted with EPDM weathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners , silicon, rubber sealant ,easy glazings /deglazing at site etc including cost and conveyance of all materials , accessories ,labour charges ,materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards . (ground floor )
19.52
7586
148078.72
First floor
25.92
7586
196629.12
Supplying & fitting - fixing up of Un-Plasticised Poly Vinyl Choloride (UPVC) (FENESTA) /NCL VEKA LTD ) Ventilator /Top Hung -60 - Series dully manufactured proofing of 60mmx55 mm x2.5mm for outer fframes 75mmx60mmx2.25mm for casement window sash profile capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness 1.5 mm prefabricated and welded through fusion welding the door sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBIN make duly fitted with EPDM weathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners , silicon, rubber sealant ,easy glazings /deglazing at site etc including cost and conveyance of all materials , accessories ,labour charges ,materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards . (Ground floor)
1.08
7115
7684.2
First floor
1.08
7115
7684.2
Head room
0.72
7115
5122.8
Providing 6mm thick Cement Plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. (Ground floor)
402.39
215
86670.78
First floor
343.38
220
75801.14
Head room
66.17
226
14970.96
Providing 12mm thick Cement Plaster (1:6) on the rough surface/ plumbed surface of masonry racking out of joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. (Ground floor)
332.41
200
66548.48
First floor
315.77
204
64660.22
Head room
179.71
209
37643.85
Providing 16mm thick Cement Plaster (1:6) on the rough surface of masonry walls for all floors including racking and joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. (ground floor
292.45
285
83450.61
First floor
315.77
292
92258.52
Head room
59.49
299
17799.41
Supplying, fitting and fixing vitrified tile 60x60cm Plain Ivory 8 to 10 mm thick in floors of approved make confirming to IS : 13755 laid on 20mm thick C.M (1:4) & filling joints with white cement of approved quality including cost of all materials. (Ground floor)
135.03
1063
143589.55
First floor
114.65
1074
123230.41
Fixing tilesof vitrified 60x60cm of plain ivory in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. per 1 sqm (Data for 10 sq.mt.) (Ground floor)
25.15
1331
33478.67
First floor
21.59
1350
29167.66
Supplying, fitting and fixing for GraniteSlab (0.1 to 0.40 Sqm of approved make conformaing to IS 13755 laid on 20 mm thick cement mortar (1 :4) (1 cement course sand) and filling joints with white cement of approved. (Ground floor)
27.48
2525
69404.04
First floor
27.48
2537
69718.68
Painting 1 coat with approved primer to wall (per one Sq. Mtr.) (Data per 9.30 Sqm.) (Labour Cost only) INCLUDING COST OF MATERIL &Labour. (Ground floor)
739.89
77
57208.29
First floor
768.67
79
60947.84
head room
305.37
81
24832.69
Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. (Ground floor
739.89
89
66301.54
First floor
768.67
89
68880.52
head room
305.37
89
27388.64
Wall painting Two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of brushes and putty including cost of paint. (per one Sq. Mtr.) (Data per 10 Sqm.) INCLUDING COST OF MATERIL &Labour
384.12
102
39399.19
First floor
410.69
104
42999.24
head room
125.66
106
13431.8
Wall painting 2 coats with weather paint of approved shade on wall surface to give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding etc. (per one Sq. Mtr.) (Data per 10 Sqm.) INCLUDING COS
435.68
95
41685.86
First floor
357.98
97
35014.02
head room
179.71
100
17971
Providing, fitting fixing of False celling with Armstrong silhouette main runner, cross tee, wall angle with fine fissured RH-99 board on 4 walls to be fixed by means of steel screw PVC plug & the Arm strong grid 2'-0" x 2'-0" suspended from ceilling etc complete with all material & all labour T&P etc as per specification approved by the Department & as per direction of EIC.
111.35
1719
191428.47
First floor
113.27
1719
194729.25
Supplying , fitting and fixing of stainless steel hand rail including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges.
30.8
3112
95870.85
First floor
30.8
3130
96408
25 mm Thick Grading Concrete in C.C.(1:2:2) using 6 mm H.G. chips. (Per Sq.M.)
154.13
401
61827.71
Head room
34.69
484
16800.71
Recessed wiring to light points / fan points/ Exhaust fan / call bell point with 1.5mm2 FRLS PVC insulated SC multistrand copper conductor of ISI marked (Finolex/ Polcab/KEI/ Anchor) with 20mm dia non-metalic PVC flexible conduit (Make- AKJ/ KINJAL/ POLYCAB/ ANCHOR) with 5/6Amp., 250V Modular switch ISI marked and ceeling rose of ISI marked (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze) mounted an Modular G.I. box with Modular base and cover of suitable size (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze), with 1.5sq.mm FRLS PVC insulated single core multistrand Cu. condoctor as earth wire including all accessories and connection. As per direction of Engineer in Charge. (Make of wire Finolex / L&T/ Anchor / KEI/ Polycab/ V-Guard) Group-A.
20
611
12231.6
Group-B.
53
905
47970.83
Group-C.
45
1277
57507.3
Supply and fixing of 6Amp 3Pin modular socket with 6Amp modular switch on existing board. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
19
242
4609.4
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) separate
11
547
6019.86
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
6
684
4104.6
Supply and fixing of 3 nos. of 3 pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 sockety out let and S.P. 15/16 A one way modular switch on modular G.I. Box with modular base and cover. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
8
1944
15554.72
Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex / KEI/ Polycab/ L&T/ Anchor)
a) 1x1.5mm2 for Inverter wiring.
190
48
9120
b) 2x1.5mm2 + 1x1.5mm2. in 20mm dia
180
157
28303.2
c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia
305
171
52212.95
d) 2x4mm2 + 1x1.5mm2 in 20mm dia
210
188
39599.7
Supply and Fixing of three pole and neutral, sheet steel, MCB distribution, 415V on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, inter connections, phosphatized and powder painted including earthing etc. as required (But with out MCB/ RCCB / Isolator) (Make- L&T/ Legrand/ Schneider/ ABB) a) 8 way double door LDB
4
1689
6758.16
Supply and fixing of 5amp to 32 amp rating 240V "C" series miniature circuit breaker suitable for lighting and other loads of the following poles in t he existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (Make- Legrand/ L&T/ Schneider)a) a)6Amp rating to 32Amp (SP) MCB
16
143
2296.64
S/F. of modular type Bell push on the existing switch box/cover including connection etc as required Anchor/Cona make.
2
144
289.9
Supplying and fixing of call bell / buzzer ISI marked suitable for DC / AC single phase 230 volts complete as require. (Make- Cona / Anchor)
2
136
273.4
SSupply and fixing of 1200 mm energy saving non decorative (55 watt,air delivery not less than 225) Hi-speed ceiling fan with connections wire and all accessories Make:( usha/crompton/Havells)
24
2560
61440
S/F. of 5Step electronic Fan regulator of Anchor/Cona make.
24
304
7308
S/F of 1.5 Ton 3star rated Inverter Copper Split type A.C Machine including outdoor unit with required CU conduit with insulation (Make Hitachi/ Carrier/ Voltas). 5 years warrenty on compresser and comprensive warrenty 1.5 years
1
55371
55371
S/F of Extra Copper pipe for 1.5 Ton A.C Machine.
10
446
4460
S/F of 4 KVA (90Volt to 270Volt) Voltage Stabilizer of V-Guard / Autotake / CG/ Microctek.
1
9750
9750
S/F. of 1x18Wt. LED tube light fiting (Philips / Panasonic / Havels) make.
39
629
24555.57
S/F. of 15 Wt. LED Square/Round recessed fitting (Philips / Panasonic / Havels) make
24
1357
32572.08
S/F of 300mm Exhuast Fan of Usha/Khaitan make.
4
2272
9089.48
S/F of Bakelite angle holder/ batten holder of ISI marked conforming to IS-1258/ 1987 with ceiling rose (Make Anchor/ Cona).
18
74
1347.3
S/F of 9Wt. LED lamp of reputed (Make: Philips/ Havels / C&S)
18
124
2233.8
S/F of 45Wt. LED Street light fittings complete with G.I. Bracket (Philips / Panasonic / Havels) make.
4
4096
16384.64
S/F of 72Wt. LED Street light fittings complete with G.I. Bracket (Philips / Panasonic / Havels) make.
4
6506
26024
S/F. of Inverter, UPS 2350VA (Make Microtech/Su-kam/Luminous)
2
15500
31000
S/F. of Inverter, UPS 1650VA (Make Microtech/Su-kam/Luminous)
1
11321
11321
S/F of Inverter Battery 12V 150AH (Make Exide / Amrom / Su-karm / Luminous with 48 Month warranty).
6
16902
101412
S/F. of Inverter Stand (Make Microtech/ Su-kam/ Luminous)
3
1920
5760
Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required.
4
3456
13825.96
Supplying and laying 8SWG copper wires ISI marked at 0.5meter bellow ground level for conductor earth electrode including soldering etc as required.
30
56
1690.2
Supply of PVC Al. Armored cables ISI marked. (Make- Glowstar/ Polycab/ Nicco/ KEI as per Letter No- 309 19.01.2011 of SEEC (R&B) Odisha) a) 16 sq.mm 4 core
60
279
16740
Cable laying on wall surface with steel shaddle MV cable laying up to 25 sq mm on surface
50
103
5161
S/F OF 63 AMP PANEL BOARD: SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF INDOOR PANNEL BOARD WITH DANGER BOARD. (S/F OF 63A. PANNEL BOARD 24"x24"x8") a) 16/18 SWG PANNEL BOX 24"x24"x8"= sq.inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space, hinges and other accessories, hinged door must be painted one coated red oxide and two coat enamel gray paint 4608sq.inch @1.51. b) Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand sinlge core cables duly crimped with copper lugs and all connections 24" x 24" including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc. 576sq. inch@ 0.87. c) S/F of Bus bar (25x5)mm with required size of insulating materials nut & bolts.1.5mtr.@516 d) S/F of 63AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make.1no.@9051. e) S/F of DN4 Extended Rotary Handle. 1no.3977 f) S/F of Spreader Terminal DN0-100 - 4Pole. 1no.@408 g) S/F of Ammeter with selector switch including all connections.1no.@1,398 h) S/F of Voltmeter with selector switch including all connections.1no.@1,398 i) S/F of indicator lamp with toggler switch and fuse.3nos.@242 j) S/F of CT coil upto 400AMP. Including all connectios.3Nos.@860 m) S/F of 63A 4Pole change over switch make (L&T / Siemens / Legrand) 1no 8933 n)S/F of 40A DP(L&T / Siemens / Legrand) 4no.@ 1141
1
41268
41268.2
S/F OF 63 AMP PANEL BOARD: SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF INDOOR PANNEL BOARD WITH DANGER BOARD. (S/F OF 63A. PANNEL BOARD 24"x24"x8") a) 16/18 SWG PANNEL BOX 24"x24"x8"= sq.inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space, hinges and other accessories, hinged door must be painted one coated red oxide and two coat enamel gray paint 4608sq.inch @1.51. b) Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand sinlge core cables duly crimped with copper lugs and all connections 24" x 24" including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc. 576sq. inch@ 0.87. c) S/F of Bus bar (25x5)mm with required size of insulating materials nut & bolts.1.5mtr.@516 d) S/F of 63AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make.1no.@9051. e) S/F of DN4 Extended Rotary Handle. 1no.3977 f) S/F of Spreader Terminal DN0-100 - 4Pole. 1no.@408 g) S/F of Ammeter with selector switch including all connections.1no.@1,398 h) S/F of Voltmeter with selector switch including all connections.1no.@1,398 i) S/F of indicator lamp with toggler switch and fuse.3nos.@242 j) S/F of CT coil upto 400AMP. Including all connectios.3Nos.@860 m) S/F of 63A 4Pole change over switch make (L&T / Siemens / Legrand) 1no 8933 n)S/F of 40A DP(L&T / Siemens / Legrand) 6no.@ 1141
1
43550
43550
Supplying and making end termination with brass compression gland and aluminum lugs forfollowing size of PVC insulated cable
8
229
1837.2
Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-chargeGround Floor 25mm dia PVC ASTM pipe (sch-80)
20
244
4896
32mm dia PVC ASTM pipe (sch-80)
15
322
4831.5
First Floor 25mm dia PVC ASTM pipe (sch-80)
20
253
5062
32mm dia PVC ASTM pipe (sch-80)
15
332
4989
40mm dia PVC ASTM pipe (sch-80)
20
436
8738
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
12
861
10335.6
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
4
1255
5020
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
4
1451
5807.6
15mm dia CP Bib cock (Con-CHR-047KN Jaquar make)
6
1107
6644.4
25mm dia brass full way valve (Shakti make)
4
1211
4847.6
32mm dia brass full way valve (Shakti make)
2
1774
3548.4
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
4
1648
6594.8
15mm CP Extension piece
26
52
1367.6
125mm CP grating
12
87
1045.2
15mm size C.P. flange
26
77
2012.4
Double Coat Hook (Jaquar/ Johnson Make)
4
700
2800.8
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank
1
45673
45673.4
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
20
63
1268
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
20
215
4302
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
20
242
4846
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
32
514
16464
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
4
497
1989.2
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
5
293
1468
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
6
232
1392
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
8
407
3259.2
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
4
58
232.8
110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make)
6
407
2444.4
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
6
457
2742.6
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
4
322
1290.8
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
5
551
2756
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
6
386
2316
110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make)
8
232
1856
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
17
160
2721.7
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
2
2365
4731.4
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
4
5894
23578
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)
2
3228
6457
One piece commod(Hindware)ELEMENT Cat No.92084.
2
19991
39983.2
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with
4
4000
16000
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
1
5902
5902.4
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail
4
901
3604
Towel ring
4
648
2592.4
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf with CP/NP guard rails.
4
694
2778.4
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm size B.E mirror (swivelled type)
4
803
3213.6
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder
8
279
2236.8
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
14
243
3413.2
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
10
148
1484
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover
2
11588
23177.2
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
2.56
541
1386.24
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.28
6651
8514.3
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.04
8645
8991.63
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge ) Kajaria tile 60cmx60cm Ground Floor
6.38
1283
8185.54
Kajaria tile 60cmx60cm First Floor
6.38
1296
8269.12
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
54.6
207
11329.5
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria tile 60cmx30cm Ground Floor
27.3
1232
33633.6
Kajaria tile 60cmx30cm First Floor
27.3
1251
34174.14
Supplying & fitting fixing of unplasticised Poly vinly chloride (UPVC ) (FENESTA/ NCL/ VEKA LTD) Casement Door series dully manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frame
6.39
8963
57273.57
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 40 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 40 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in chargeAqua guard pure Chill 40 PSS UV
1
48500
48500
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 150mm dia P.V.C. pipe
12
2371
28455.6
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
3
22456
67368
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
27220
54441.2
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. 1 x 4.70 x 3.30m x 0. 70
16.21
291
4729.11
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. 1 x 4.70 x 2.30m x 0.15 =
7.89
313
2470.91
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
3.02
162
489.48
Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete.
1.62
7064
11443.84
Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete.
1.41
8645
12190.58
Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site.
0.88
9412
8283.18
Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges. 1.013cum x 2,5 x 35.32 =89.44 say Rs-
0.86
9075
7805.1
Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.
6.24
753
4702.46
Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:3) in foundation and plinth including watering and curing and lead of materials to site.
9.38
6426
60282.45
Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site.
36.95
220
8129
Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site.same as plastering
36.95
41
1522.34
Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
4
300
1201.2
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
2
495
991.8
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
2.88
541
1559.52
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements