Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,49,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_104099_6Bid Award Id
ViewTender No
CCE R and B Rgda- 02/24-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Cement Concrete of proportion (1:3:6) in foundation and floors using 40mm size hard black Crusher broken granite stone metal of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6") thick to required level ramming watering curing etc. including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge.
133.32
819246
6144.96
Fly Ash brick masonry in cement mortar (1:6) in F&P using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge., T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
130.4
766380
5877.15
Fly Ash brick masonry in superstructure of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
142.36
841415
5910.48
First Floor Head Room
8.49
53315
6279.75
RCC work of M-20 grade in the following Structural building works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
RCC in Footing Base
146.93
990246
6739.58
RCC in Plinth beam
24.43
185791
7605.06
RCC in columns in superstructure
31.95
506680
15858.55
RCC in Wall Beam
24.33
385838
15858.55
RCC in lintle
11.13
159631
14342.49
RCC in lintle in Head Room
0.49
7867
16056.31
RCC in Chajja
20.81
25533
1226.98
RCC in Roof Slab
51.91
721781
13904.48
RCC in Stair Case
2.33
32397
13904.48
RCC in Stair Case in head Room
1.42
22053
15530.71
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL/JINDAL/SHYAM) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment). etc. complete as per specification & direction of Engineer-in-charge
311.84
2832592
9083.48
12 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge Ground Floor
1134.55
217073
191.33
12 mm thick Cement Plaster (1:6) in Head Room
37.16
7279
195.9
16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
Ground Floor
798.48
219350
274.71
16 mm thick Cement Plaster (1:6) in Head Room
37.16
10631
286.09
Supplying, fitting & fixing of Supplying, fitting and fixing Vertified Tile in flooring 600mm x 600mm plain (Ivory) of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:1) (1 cement : 1 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-chage.
334.16
411919
1232.7
Supplying, fitting & fixing of Vertified Tile 600mm x 600mm plain (Ivory) of approved make confirming to IS:13755 in dadoes, skirting laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
42.96
54663
1272.42
Supplying,fitting and fixing of 20mm thick Granite tile in dados on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete. with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge.
13.13
30895
2353.06
Finishing surface of walls with cement based wall putty approved make and finishing smooth and even surface to receive painting , including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. Ground Floor
787.81
71816
91.16
Painting Two coat with Weather coat over coat of primer and of approved shed of approved colour over prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
1171.71
112109
95.68
Painting Two coat with PLASTIC EMULSION PAINT over coat of primer of approved colour over prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. Ground Floor
1169.8
89828
76.79
Providing & Applying priming coat with water bound primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
All Floors
2304.35
171097
74.25
Supplying and Fixing of M.S Collapsible gate made out of MS flat confirming to IS-1977/1966 as per design approved @48kg/sqm etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
468.22
27695
59.15
Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
2100.47
125356
59.68
Painting Synthetic enamel paint of approved brand and manufacturer of required colour to give an even finish with two or more coats on new work of iron over a coat of suitable shade with primer of approved brand and manufacturer's instructions including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.
34.88
6327
181.41
Dismantling brick or stone masonery in lime/cement mortar under and above 3.00mt height including stacking the useful materials for reuse and removing the debrises with in 50m lead including cost of all labour with T&P etc. complete.
48.34
75887
1569.87
Dismantling and removing A.S Flooring from damaged floors including scrneeing stacking the useful materials for reuse and removing the debrises with in 50m lead including cost of all labour with T&P etc. complete.
158.67
17834
112.4
Dismantling and removing old lime or cement plaster from walls including racking joints 12mm deep and removing debris with in 50 meters lead scrneeing stacking the useful materials for reuse and removing the debrises with in 50m lead including cost of all labour with T&P etc. complete.
158.67
8917
56.2
providing fixing and fitting of 100 mm dia PVC rain water pipe of approved quality and approved make confirming to IS with necessary bends and clamps including cost of all labour with T&P etc. complete.
21.95
4327
197.13
Providing and fixing of Vetified Industrial floor tiles in floors of size 300mm x 300 mm of approved make confirming to IS: 13755 laid over 20mm thick bed of cement mortar 1:1 (1 cement: 1 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge.
111.48
130235
1168.24
Providing and fixing of un plasticised Poly vinyl chloride (UPVC) Sliding Windows (Two track) casement door 108x45x2.5mm of outer frame 39x58x2.25mm casement door sash profile etc. to be completed by means of jointing angle etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.
41.81
207418
4960.97
Providing and fixing of un plasticised Poly vinyl chloride (UPVC) Doors casement door 60x60x2.5mm of outer frame 102x60x2.25mm casement door sash of 74x60x2.5 mm profile etc. to be completed by means of jointing angle etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.
39.02
338776
8682.12
Providing 2.5 cm thick grading concrete (1:2:2) using 6 mm size HG Chips on new works etc complete with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.
31.04
12166
391.96
Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.
319.43
88392
276.72
EI Works
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P 5/6Amp, one way modular switch ISI marked(L&T/crabtree/ Havells/ ROMA/ SIEMENS/ Finolex) and ceiling rose ISI marked mounted on Modular GI box of 18SWG having modular base & cover of suitable size with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )
Group-A. L.P.-24 F.P.-2 C.B.-
26
14950
575
Group-B. L.P.-17 F.P.- 14 C.B.-
31
26257
847
Group-C L.P.-38 F.P.- 25 C.B.-4
67
84420
1260
Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FR PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard)
Group-A(5Amp Switch & Socket)
5
2940
588
On Existing board.
18
3906
217
Recessed submain wiring along with earth wire with the following sizes of PVC insualted single core multistand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm in recess PVC conduit as required(make of wire-Finolex/L&T/ Anchor/ Havels/V.Guard)
b)2x1.5mm2(1.19.2.SOR-17) loop wiring
60
4140
69
c)(2 x 1.5 sq.mm + 1 x 1.5 sq.mm)(1.8.1.SOR-17)
220
34320
156
d)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)
300
51300
171
e)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)
350
65800
188
f)4x6mm2+2x2.5mm2(1.8.10.SOR-17)
80
25040
313
g)4x10mm2+2x4mm2(1.8.11.SOR-17)
80
35120
439
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.
14
8302
593
S/F of 20W/18W LED batten light of crompton/Havells make.
44
30404
691
S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose.
5
50
10
S/F.of 9W/10Wt.LED lamps of Havels/Crompton make.
5
785
157
S/F of 1x60W 5700K LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protection Havells make(ENDURA PLUS )
8
56432
7054
S/F of 4 sq.mm 2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)
120
6360
53
S/F of 1x21W surface celing LED light made up of pressure die cast housing with secondary optics ,IP66 protection with fixing on ceiling of Havells make(ENDURA NEO DL SURFACE) or Equivalent of Crompton/Philips and Connection as per direction of Engineer-in-Charge.
57
119073
2089
S/F.of 48"A.C.Ceiling fans complete with ISI marked (Havells (Spacer/Velocity) /Usha (Allure)/ Orient (Jazz)/Bajaj-Elegance (Ivory)/ crompton Aura plus(ivory) make e including all accessories & connection as per direction of Engineer-in-charge.
37
95016
2568
Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand) on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.(For light plugs to be used in non residential buildings)
37
16502
446
Providing and fixing extra down rod of 60 cm length G.I. pipe 20 mm dia heavy gauge including Cutting & threading of Downrod as per direction of Engineer-in-charge.
37
3478
94
S/F of 300mm metal exhaust fan with wall cutting masonary work including all accessories of USHA(Jet Dix)/ Bajaj (Bahar)/ Crompton make & connection as per direction of Engineer-in-charge.
4
7284
1821
Supplying and fixing suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet for AC connection, painting etc as required.
10
4860
486
Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required.
10
7260
726
S/F.of Computer board consisting of 4Nos 5/6AMP Modular type socket & switch including suitable size of modular GI box ISI Mrked complete with connection as per the direction of Engineer-in-Charge.
5
8045
1609
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required
4
545
136.47
S/F.of Modular Multipurpose board with 2nos. Of 15/16A modular SP switch and modular socket including suitable size of modular GI box ISI Mrked complete with connection as per the direction of Engineer-in-Charge.
30
39180
1306
S/F of 6way(8+18)TPN Double door Power DB. Box (Legrand/L&T/Hager) with 63Amp,100mA,4P RCCB of Legrand/L&T/Hager) 18x(6-32Amp)SP MCB of Legrand/ L&T/Hager make including all accessories and connection as per direction Engineer-in-Charge.
2
26360
13180
of S/F of (4+12) way LDB TPN Double door D. Box (Hager/L&T/ Havells) with 100mA 4P RCCB,12x(6-32Amp)SP MCB of Hager/ L&T/Legrand make including all accessories and connection. as per direction Engineer-in-Charge.
2
21724
10862
S/F of 8 way Double door D. Box (Havells/L&T/Hager) with 40Amp DP,6x(6-32Amp)SP MCB of Legrand/L&T/Hager make including all accessories and connection as per direction Engineer-in-Charge.(UPSDB)
2
8910
4455
P/F of 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required(to be run along with 16sqmm cable for earth wire)(SOR-3.19)
30
454
15.15
P/F of 8 SWG Copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required (to be run along with cable for earth wire)( (SOR-3.20)
40
2141
53.53
P/F of earth bus of 50mm×5mm copper strip ISI marked on surface for connection etc as required
2
1749
874.66
S/F of Electrical safety acrylic chart/Poster depicted with various safety precautions , management and provides information to perform First Aid in case of electric shock etc in English and odia language with Multi color images and sign
2
1000
500
S/f.of Standard earthing with G.I.earth pipe of 4.5mtr 40mm dia (With charcoal and salt) including all accessories and connection providing masonary enclosure and cover plate with watering arrangement (Sl.No.5.2.of DSR-20022)per direction of Engineer-in-charge.
2
13710
6855
S/F.of Special earthing complete with provision of 600x600x3mmthick or (2ft x 2ft) copper plate, 40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt,funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge.(Sl.No.5.6 of DSR-20022)
2
27676
13838
Supply and laying of 25mmx5mm copper strip on surface or in recess for connection etc as required.(Connection to be made from special earth electrode to Main panel )as per direction of Engineer-in-charge.
15
12795
853
P/F of 25x5mm GI SWG GI strip on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required (For loop wiring to each panel and subpanels)
20
2620
131
S/F of 50 sq.mm 3&1/2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)
60
19800
330
Fabrication of 160Amp POWER Panel board size 48"x36"x12" with powder coat made out of SWG CR sheet with designing with (i)160A , 25kA, 4P MCCB Adjustable thermal & magenetic Legrand/ L&T/ & Hager Make.-1 nos. (ii)160A, 4pole Onload change over of setting of L&T/Legrand/Hager make (iii)63A, 4P MCCB egrand / Hager / L&T Make. -4 Nos. (iv)40AMP, DP MCB C- Series Legrand / Hager / L&T Make. - 2Nos. (v) 200AMP Kitkat fuse -3Nos. (vi) S/F.of Digital Voltmeter,Ammeter, Selector switches CT coil and Indicator lamp RYB with toggle switch etc. -1 set (vii)Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour. (viii)Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts. (ix) 250Amp TPN Cu. busbar-1set
1
105961
105961.5
Supply of Insulation mats Class A insulation of size 1Mx2Mx2mm.
1
2979
2979
Electrical Inspection charges for building
1
7237
7237
Fire Fighting
Supplying, installation, testing and commissioning of Addressable Multi Detector(Smoke cum Heat) complete with base and isolator as per direction of Engineer-in-charge.
13
52819
4063
Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) serving for followoing detectors & devices in maximum LCD display complte with 2 nos of 24V 40Ah bayttery backup, and also provision for 2 potentially open contact per loop for interlocking of AHU contact as per direction of Engineer-incharge.(Morley/Bosch/Notifire/Honeywel)
1
244699
244699
Supplying, installing ,testing and commissioning of break glass type Manual call point . The Manual call point with monitor module shall be single stage type with all accessories and suitable sinages complete., the Manual call point shall be as per technical specification. and shall be of EN and LPCP listed.
1
4124
4124
Supplying, installing ,testing and commissioning of Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification. The devices shall be of EN and LPCP listed (Make: Bosch or Equivalents)
1
7510
7510
Supplying and drawing of 1.5 sq.mm 2core copper Armored Cable with all accessories as per direction of Engineer-in-charge.
210
32239
153.52
A.FIRE PROTECTION WORK (A-1) FIRE EXTINGUISHERS Providing & Fixing of fire extinguishers with necessary accessories, stand, trolley, etc. 6 Kg ABC (Powder Type) Fire Extinguisher. In HP Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683 (Ceasefire/minimax/superimax-make)
4
13056
3264
ISI Marked portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete in all respect including initial fill and wall suspension brackets & shall conform to latest IS 15683
4
30800
7700
Supplying and installing at approved location approved make fire buckets (3 nos./set) of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and black on the bottom, inscribed with letters '' FIRE'' in black and gold with dry clean fire sand. The scope shall also include the stand for mounting the sand bucket.
1
2460
2460
(A-7)SIGNAGES Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground. The size of the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished floor near Manual call points.
4
8520
2130
Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 60cm.
2
1460
730
Supplying and installing of in position the signages " FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerized cut, PVC Non-reflective self adhesive vinyle painted foam board of 3' x 4'. as per BIS Specification. A) alert the security at security room by actuating manual call point located at strategic locations. B) evacuate the occupants by using fire exits and emergency exits only and assemble at various assembly points. (C) if possible try to extinguish the fire by using nearest / suitable portable extinguisher or water from nearest wet riser. D) be calm and do not give any room from panic, walk, do not run. (E) if you encounter serious difficulty in evacuation, flat and try to attract attention of rescue team.
2
6700
3350
b.Action by security/reception upon receipt of information through fire alarm or fire detectors or by using public address system. (A) alert the occupants by using public address system. B) inform fire control through any one of the following phone numbers: 101 /(local numbers) C) refer evacuation plan from evacuating standard people. D) guide the fire force, on their arrival to the seat of fire. E) in case of the casualties, call ambulance by dialing number…….. Phone : -----------------------Fax : ---------------------------- as per BIS Specification.
2
6700
3350
Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC reflective self adhesive vinyle painted foam board, complete with mirror fasteners. as per BIS Specification. Fire extinguishers
2
860
430
Analogue addressable Main fire alarm panel
1
430
430
MCP’s
1
430
430
CC TV Supply and Installation of 32 Ch 2 Sata Network video Recorder (Upto 10 Tb Support Per Sata) .Make:CP PLUS/Hikvision W. BOX/ or equivalent make
1
27450
27450
Supply and Installation of 8 Port Poe Switch 10/100/1000 With Sfp Make: Cisco/D Link/Secureye.e:CP PLUS /W. BOX/ Pelco or equivalent make
2
17812
8906
Supply and Installation of Indoor Dome IR Network Camera IP 4MP W BOX/ Pelco / Honeywell. or equivalent make
8
33280
4160
Supply and Installation of Indoor Bullet IR Network Camera IP 4MP W BOX/ Pelco / Honeywell. or equivalent make
6
25548
4258
Supply,installation,testing & commissioning of I.O Box For Camera :CP PLUS W. BOX/ Pelco or equivalent make
20
980
49
Supply & Fixing of 4U Wall Mount Rack loaded . Make: Valrack/APW/Retail
1
3445
3445
Supply and Installation of 43" Commercial Display.Make: Samsung/LG/Panasonic/SONY Smart Tv or equivalent make
1
36484
36484
Supply,installation,testing & commissioning of 10/Tb Hdd Survilliance Make: Toshiba/Seagate or equivalent make
1
26800
26800
Supply and lying of 4-pair Cat6 UTP cable for camera connectivity in existing conduits.Make:Finolex, D- Link, Secureye.
340
13260
39
Supply and commissioning of CCTV Installation And Configuration
40
19492
487.3
Supply,installation of Rj 45 Connectors Make: Tyco-AMP/ Schneider/ Digisol .
40
2200
55
Supply,installation of Pvc Pipe 3/4 'Running of cat6 Cable
340
17340
51
Supply,installation,testing & commissioning of 1150 Ups Make of Luminious make
1
7615
7615
Supply,installation,testing & commissioning 150Ah Battery of Luminous Make
1
14210
14210
HDMI Exrender Upto 10mtr
1
1350
1350
Supply,installation, of Invertor Trolly of ISI make of any.
1
1713
1713
PH Works
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.
Ground Floor25mm dia PVC ASTM pipe (sch-80)
30
5742
191.4
32mm dia PVC ASTM pipe (sch-80)
120
30156
251.3
First Floor 32mm dia PVC ASTM pipe (sch-80)
40
10384
259.6
40mm dia PVC ASTM pipe (sch-80)
30
10221
340.7
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge.
Ground Floor-20mm dia CPVC pipe
20
4980
249
25mm dia CPVC pipe
45
15178
337.3
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
250mm thick wall Ground Floor
12
600
50
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. Ground Floor
12
2038
169.9
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.Ground floor
65
11628
178.9
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. (Fixtures make of Brass / G.M / C.P fittings are to be pre-approved by the E.I.C) 15mm dia CP bib cock (Plaza/Aquatic/Amber)
2
1244
622.1
15mm dia CP Long body bib cock (Plaza/Aquatic/Amber)
3
2079
693
15mm dia CP angle stop cock(Plaza/Aquatic/Amber)
15
8475
565
15mm dia CP concealed stop cock (Plaza/Aquatic/Amber)
4
3276
819
15mm dia CP long neck pillar cock(Plaza/Aquatic/Amber)
6
3756
626
Two-way Bib cock(Plaza/Aquatic/Amber)
4
3834
958.7
Health Faucet(Plaza/Aquatic/Amber)
4
2222
555.6
Sink Cock (Plaza/Aquatic/Amber)
4
4405
1101.4
15mm dia CP revolving shower with arm(Plaza deluxe make)
3
1836
612.3
25mm dia brass or gun metal fullway valve (Shakti Make)
6
5582
930.4
32mm dia brass or gun metal fullway valve (Shakti Make)
4
5448
1362.2
40mm dia brass or gun metal fullway valve (Shakti Make)
2
3457
1728.6
15mm dia CP Extension Piece
32
1897
59.3
15mm dia CP Flange
32
1289
40.3
125mm dia. CP grating
14
1197
85.5
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 2000Ltr Roto-moulded water storage tank (Syntax Make) on the roof of Ground floor
2
73200
36600
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white (Hindware / Parryware Make)
6
9160
1526.8
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In ground floor110mm dia U-PVC SWR pipe (Ashirbad /Sentinity/Supreeme)
140
64946
463.9
110mm U-PVC door tee
12
4632
386
110mm U-PVC Plain tee
12
3872
322.7
110mm U-PVC door bend
16
4697
293.6
110mm U-PVC plain bend
18
4176
232
110mm dia U-PVC 'P' trap
10
4973
497.3
110mm dia U-PVC Plain Shoe Bend
8
1856
232
110mm dia U-PVC offset with out ear
10
4074
407.4
110mm dia U-PVC cowl
8
465
58.2
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall
12
2425
202.1
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
12
2028
169
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge 580mm size Orissa pan (Parryware / Nycer make)
2
4643
2321.7
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain (Parryware / Nycer make)
4
10660
2665.1
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx440 mm size wash hand basin With porcelain pedestal (Parryware make)
6
23737
3956.3
Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half stall urinal (Jaquar/Parryware / Hindware make).
2
6711
3355.6
15mm dia urinal spreader
2
573
286.6
32mm dia C.P. dome waste
2
257
128.5
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge.Squatting urinal of size 600mmx350mm (Jaquar/Parryware/ Neycer/ Hindware)
2
5875
2937.6
Supplying all materials, labour, T&P and fixing wash kitchen sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make)
4
19749
4937.3
Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
25mmx600mm long CP towel rail
6
4251
708.5
CP Towel ring
6
2854
475.7
Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge. CP soap holder
10
1847
184.7
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge.600mmx125mm glass shelf with CP/NP guard rails
6
3681
613.6
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. Mirror(Bevellededge) 600mmx450mm
6
4105
684.2
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. In ground floor
5.81
2536
436.5
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
In ground floor
1.94
8694
4481.9
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
Ground floor .
0.97
6217
6409.8
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground floor .
91.23
14788
162.1
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany / Johnson to be pre-approved 300 x 300mm of size In Ground floor
20.27
18745
924.8
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany/Jhonson 30cm x 45 cm size of In Ground floor
91.23
83311
913.2
Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge.
13.23
43385
3279.3
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
1
112242
112242
EXTERNAL P.H. WORK Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia U-PVC Alround Concrete
40
45572
1139.3
160mm dia U-PVC Alround Concrete
60
112788
1879.8
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.
Inside size 250mmx250mm
8
12023
1502.9
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm
8
73832
9229
---- do --- addl depth of 0.15m upto 0.90m
2
2360
1180
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm
5
89630
17926
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
1.40m dia x 2.00m deep soakway pit
2
41897
20948.6
Construction of 50 users RCC septic tank- 1 No.
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
27.95
6378
228.2
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
5.59
1369
245
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge. 50 users
32.8
8419
256.7
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
3.08
1344
436.5
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
3.08
14938
4850.3
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside/outside)
15.84
2669
168.5
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside/outside)
15.84
540
34.1
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
R.C.C floor and roof slabs up to 4.30m height
10.34
6999
676.9
R.C.C beams,columns,girder and bressmer etc.
73.5
75117
1022
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
9.41
86697
9213.3
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
11.76
83434
7094.8
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge.
6.01
762
126.8
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
5.28
855
162.1
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
0.85
4152
4885.8
Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
185
185.4
Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipe
1.8
835
463.9
110mm dia U-PVC Plain shoe bend
1
232
232
110mm dia U-PVC Cowl
1
58
58.2
CONSTRUCTION OF 10000 LTR RCC SUMP
Earthwork in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge. Initial lift
18.37
4192
228.2
Earthwork in excavation of foundation in stonety earth mixed with gravel within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge. 1st Extra lift -
8.58
2352
274.2
Supplying all materials, labour, T&P and providing filling sand including watering, ramming and conveyance of all materials to site.
10.21
4456
436.5
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site.
1.26
6111
4850.3
Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.
5.2
36892
7094.8
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
6.64
33858
5099.1
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
5.14
47356
9213.3
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
RCC walls
11.31
7655
676.9
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) including watering,curring and conveyance of all materials to site.
47.08
8154
173.2
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
24.2
825
34.1
Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI step iron including supply of necessary C.C(1:2:4) for fixing etc complete as per P.H.D. specification.
10
2684
268.4
Sinking of 200mmx150mm dia tube well -1 No
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only Drilling of 200mm dia bore
00 mtr to 45mtr
45
35217
782.6
Drilling of 150mm dia bore
46 mtr to 130mtr
85
66521
782.6
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
Lowering of 200mm dia P.V.C casing pipes
00 mtr to 45 mtrs
46
8303
180.5
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
200mm dia PVC (sch-80) pipe
45.6
80967
1775.6
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
By DTH Rig
1
6586
6586
Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department)
Labour charges
1
1173
1173.1
C.C(1:2:4)
0.2
1281
6409.8
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
40mm HDPE pipes
45.4
6682
147.2
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
Bore well protection chamber.
1
10708
10708.3
Supplying submerssible pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications
2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm
1
16625
16625.6
2H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm
1
16625
16625.6
DOL Control panel
2
7611
3805.5
40mm dia steel short piece
2
404
202
Well cap
2
304
152.3
50mm size CI bracket
2
182
91.3
2.50sqmm flat cable
160
20496
128.1
20mm dia rigid UPVC pipes
80
552
6.9
Steel rope with cover
80
2136
26.7
Labour charges for lowering including transportation
2
4000
2000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements