Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Works Department - EICCL Tender
Eprocure
Opening Date21 May 2021
Closing Date4 Jun 2021
Tender AmountRefer Documents
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_68552_8Bid Award Id
ViewTender No
S.E.Ctc.(RandB)3/2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Cement concrete (1:3:6) in foundation and plinth using 4cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
341.72
-
4576.85
... More
RCC work of M-20 Grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Footing base (Compound wall)
97.03
-
4930.5
... More
Plinth Beam
64
-
5282.6
... More
Column
40.42
-
10553.65
... More
RCC bend and Coping
43.97
-
8421.5
... More
RCC work of M-25 Grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Pile Cap Ground Floor
404.09
-
5279.45
... More
Grade beam
74.85
-
5631.48
... More
Roof beam Colmn GF
156.41
-
10902.58
... More
1st floor
136.85
-
12139.3
... More
2nd floor
26.48
-
13619.35
... More
Lintel GF
22.28
-
8770.4
... More
1st floor
21.55
-
9580.77
... More
2nd floor
0.31
-
10549.05
... More
Chajja GF
173.78
-
798.69
... More
1st floor
173.78
-
897.08
... More
2nd floor
6.51
-
1014.9
... More
Roof Slab GF
189.79
-
8512.82
... More
1st floor
231.34
-
9271.65
... More
2nd floor
28.45
-
10178.15
... More
Staircase GF
9.55
-
10426.16
... More
1st floor
9.55
-
11567.59
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor and Compound wall
1396.52
-
7656.3
... More
1st floor
466.72
-
7679.5
... More
2nd floor
69.74
-
7703.8
... More
Providing 2.5cm thick grading concrete of prop.(1:2:2) using 6mm size H.G. chips of approved quality & from approved quarry including watering, curing with cost, conveyances, taxes of all materials, cost of all labour, T&P required for the work etc. complete as per direction of Engineer-in-charge iGF
43.26
-
288.8
... More
1st floor
1537.47
-
316.1
... More
2nd floor
87.82
-
347.5
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinth for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor & Compound wall
633.14
-
4115.43
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor and Compound wall
682.78
-
4153.8
... More
1st floor
482.78
-
4413.3
... More
2nd floor
152.89
-
4711.9
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:4) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
8.64
-
4358.1
... More
1st floor
8.53
-
4617.7
... More
Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor and Compound wall) Outside
5387.27
-
135.87
... More
1st floor
2127.48
-
141.25
... More
2nd floor
751.7
-
146.91
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor) Inside
2364.42
-
193.71
... More
1st floor
2398.64
-
198.51
... More
2nd floor
607.75
-
203.45
... More
Providing 12mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge Inside
168.91
-
147.39
... More
1st floor
164.63
-
150.62
... More
Providing fitting and fixing of Kota tiles in floors of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
1382.59
-
948.88
... More
1st floor
1128.37
-
969.61
... More
Providing fitting and fixing of Kota tiles in dadoos and skirting of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
140.14
-
1142.4
... More
1st floor
116.04
-
1172.23
... More
Providing fitting and fixing of Vetrified industrial floor tiles in floors of approved make of size (300x300)mm confirming to IS:4457 over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
339.43
-
820.8
... More
1st floor
59.73
-
830.4
... More
2nd floor
17.69
-
840.5
... More
Providing fitting and fixing of glazed Ceramic wall tiles in dadoos and skirting of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
144.41
-
740.1
... More
Providing fitting and fixing of precast Chequered tiles of (300mmx300mm) in floors of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
114.53
-
476
... More
Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge.
1235.46
-
266.9
... More
Supplying, fitting & fixing in all floors of M.S.grills in windows with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost All floor
10144.96
-
58.12
... More
M.S. Grill gate
1611.34
-
59.68
... More
Finishing wall surface with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge
4457.46
-
65.46
... More
1st floor
4381.75
-
66.16
... More
2nd floor
219.18
-
66.83
... More
Finishing wall surface with water bound cement primer of approved shade on new wowrk two coats to give an even shade and finished smooth and even surface to receive painting including cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge Ground floor
8828.19
-
57.7
... More
1st floor
5977.8
-
59.1
... More
2nd floor
1063.19
-
60.6
... More
Distempering two coats with any approved shade and quality with oil bound distemper in interior surface of walls up to any height & in all floors to give an even shade including cost, conveyance, taxes of all materials with labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge
4457.46
-
63
... More
1st floor
4381.75
-
64.5
... More
2nd floor
219.18
-
66
... More
Painting two coats with anti-fungal resistance Weather Seal Coat of approved shade over a coat of (water bound) wall primer upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge GF
4370.74
-
70.1
... More
1st floor
1596.05
-
72.7
... More
2nd floor
844.01
-
75.4
... More
Painting two coats of approved synthetic enamel paint over a coat of primer to interior surface of walls of approved quality to give an even shade k including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge
142.38
-
186.07
... More
1st floor
203.76
-
190.9
... More
2nd floor
7.65
-
195.9
... More
Supplying good eartht with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5 km. and depositing qat site and filling inside the required area by means of head load including cost of all labour, conveyance, taxes, loading, unloading, T&P etc. all complete as per the specification and direction of Engineer in charge..
794.16
-
247.8
... More
Providing, laying and fixing in position reinforced cement concrete 450mm dia NP3 hume pipes for culverts on first class bedding of granular materials including pointing ends fixing collars with cement mortar (1:3) for finished item of work as per Section 1000 & 2900 of specifications for road and bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge
18
-
1563.15
... More
Construction of granular sub-base by providing coarse graded Granular sub-base Grading-VI materials as per table 400-2, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MORT&H Specification for Road & Bridge works ( 5th Revision).
266.38
-
1638.14
... More
Construction of dry lean cement concrete sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25mm. aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table 600.1, cement content not to be less than 150kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10Mpa at 7 days, mixed with concrete mixture, transported to site, laying and compacting with PRR, finishing and curing as per clause 601 of MORT&H Specifications for Road & Bridge works (5th Revision).
168.4
-
2982.84
... More
Construction of un-reinforced dowel jointed, plain cement concrete pavement (M-30)over a prepared sub base with cement @ 400 kg. per cum coarse and fine aggregate of not exceeding to 25mm, mixed with concrete mixer as per approved mix design, laid with a fixed form compacted with vibrator and finished in continuous operation including provision of contraction expansion, construction and (with SAIL steel) filler separation membrance against primer joint sealant debonding strip dowel bar tie rod admixture curring compound finishing to lines and graded as per drawing and as per Clause 602 of MORTH specification for Road and Bridge work(5th Revision)
336.84
-
5613.3
... More
Providing compacted shoulder with granular materials by using moorum of approved quality, watering and compacting the required density in OMC with PRR as per approved drawing and technical specification as per Section 900 and Clause 407 of MoRT&H Specification for Road & Bridge works (5th Revision) and as per direction of Engineer-in-Charge
61.24
-
1029.87
... More
Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5 km. spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MORT&H specifications for Road & Bridge works(5th Revision).
3883.37
-
128.83
... More
Providing fitting and fixing MS panelled door single leaved shutter with MS frame overal size including frame 1830mmx910mm using 35x35x6mm size MS angle as door frame 25x25x3mm MS angle as shutter style bottom and top rail 1.00mm CRsheet as shutter panel 3 nos. of 19x5mm MS flat as panel stiffener on each leaaf 3nos. of hold fast (175mm long) on each side made out of 35x35x6mm MS angle with bifurcated tip etc complete as per direction of Engineer-in-charge
501.69
-
79.9
... More
Providing fitting fixing of Al door (Single leaf/Double leaf) with anodised Al door section of 9202 as bottom and middle member 9201 as top bottom and middle member with frame section as 9221 with tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, TandP, hire charges of drilling machine, labour charges etc. complete as per specification and direction of Engineer in charge Al. Section
1956.35
-
393.53
... More
12mm thick prelaminated particle board
70.1
-
729.61
... More
6mm thick plain glass
70.1
-
607.19
... More
Providing and fixing of window (sliding type) of approved make to be fabricated from Alluminium section 9778 as frame section No.4095, 4096 and 9777, 3994 with 5mm thick black glass panel fitted with rubber beading etc.including cost of fitting materials all taxes, labour, T&P etc. complete as per specification & direction of Engineering-in-charge, but excluding the cost of glass. Alluminium Section
1093.21
-
572
... More
5mm thick black glass
201.2
-
611.89
... More
Providing fitting fixing ofAluminium glazed window using anodised section of 9210 and 9207 as assingle groove and double groove respectively as horizontal and vertical member and section 4660 as tapered clip and jointing angle No.1855 for fixing up 6mm thick plain glass including all cost of labour, TandP, hire charges of drilling machine, labour charges etc. complete as per specification and direction of Engineer in charge Alluminium Section
494.9
-
469.41
... More
6mm thick black glass
87
-
607.19
... More
E..I. Works:-Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-Finolex/Polycab/V-Guard)(Make of Modular Switch- Anchor Roma/ L&T/ Crabtree/Legrand) Group-A -L.P- 90 F.P- C.B.P-
90
-
580
... More
Group-B L.P- 208 F.P- C.B.P-
208
-
812
... More
Group-C L.P- 298 F.P- 201 C.B.P-
499
-
1103
... More
Supply and fixing of 6Amp plug with 6Amp switch on existing board (Anchor Roma/ L&T/ Crabtree/Legrand)
95
-
351
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection (Anchor Roma/ L&T/ Crabtree/Legrand)
12
-
623
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (Anchor Roma/ L&T/ Crabtree/Legrand)
7
-
684
... More
S/F of 25 Amp modular single phase stater for AC Point
12
-
1050
... More
Wiring in PVC Conduit with modular Switch and socket for computer board(4 NOS MODULAR SWITCH AND SOCKET)
45
-
2083
... More
Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20mm Dia Conduit Extra Lead
1497
-
130
... More
2 X 2.5 sq.mm +1 X 1.5 sq.mm in 20mm Dia ConduitFrom MCB to Switch Board
1214
-
144
... More
2 X 4 sq.mm +1 X 1.5 sq.mm in 20mm Dia Conduit to AC Point and Multipurpose Board
195
-
162
... More
2 X 6 sq.mm +1 X 2.5 sq.mm in 20mm Dia Conduit to DB from Panel Board
343
-
184
... More
4 X 10 sq.mm + 2 X 4 sq.mm in 32mm Dia Conduit From Panel to TPN Light Distribution Board
25
-
418
... More
4 X 16 sq.mm + 2 X 10 sq mm in 40 mm Dia Conduit From Panel to TPN Power Distribution Board
40
-
626
... More
S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .
26
-
9
... More
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) make-(Make-Legrand Ekinox3 ETPN/Scnider Acti 9)4 Way(8+12) Way TPN MCB DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door
1
-
4157
... More
6 Way(8+18) Way TPN MCB DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door
1
-
5082
... More
Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (make-Legrand Ekinox3 ETPN/Scnider Acti 9./L&T)8 Way DD DB
10
-
2067
... More
12 way DD DB
4
-
2458
... More
Supply and fixing of 5Amp to 32A rating 240 V/415 V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-Legrand DX3/Scnider Acti 9/L&T)63A FP MCB
1
-
2805
... More
100A FP MCB
1
-
9962
... More
63A DP MCB C Series
14
-
1389
... More
25A SP MCB C Series
12
-
316
... More
10A SP MCB C Series
106
-
316
... More
Supply , installation , testing and commissioning INDOOR pannel board with danger board. (Head Main Panel)16/18 SWG pannel box 36 X 24X 10= sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint.
8640
-
1.51
... More
Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36 X 24 including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc.
864
-
0.87
... More
S/F of copper bus bar 35 x 5mm with required size of insulating material and nut and bolts.
2
-
821
... More
S/F of 250A MCCB FP 35KA MCCB (Make- L&T/Legrand/Schnider) for Incomming
1
-
15287
... More
S/F of 125A MCCB FP 35KA MCCB (Make- L&T/Legrand/Schnider) for Outgoing
2
-
9782
... More
Supply and fixing of Ammeter with selector switch including all connections
1
-
1398
... More
Supply and fixing of voltmeter with selector switch including all connections
1
-
1398
... More
Supply and fixing of Indicator lamp with toggler switch and fuse
3
-
242
... More
Supply and fixing of C.T coil upto 400Amp including all connections
3
-
860
... More
Supply , installation , testing and commissioning INDOOR pannel board with danger board. (Ground Floor)16/18 SWG pannel box 36 X 24X 10= sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint.
8640
-
1.51
... More
Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36 X 24 including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc.
864
-
0.87
... More
S/F of 125A MCCB FP 35KA MCCB (Make- L&T/Legrand/Schnider) for Incomming
2
-
9782
... More
S/F of 63A FP MCB
1
-
2805
... More
S/F of 100A FP MCB
1
-
9962
... More
S/F of 63A DP MCB
6
-
1389
... More
Supply and fixing of Ammeter with selector switch including all connections
1
-
1398
... More
Supply and fixing of voltmeter with selector switch including all connections
1
-
1398
... More
Supply and fixing of Indicator lamp with toggler switch and fuse
3
-
242
... More
Supply and fixing of C.T coil upto 400Amp including all connections
3
-
860
... More
Supply , installation , testing and commissioning INDOOR pannel board with danger board. (First Floor)16/18 SWG pannel box 36 X 24X 10= sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint.
8640
-
1.51
... More
Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36 X 24 including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc.
864
-
0.87
... More
S/F of 125A MCCB FP 35KA MCCB (Make- L&T/Legrand/Schnider) for Incomming
2
-
9782
... More
S/F of 63A DP MCB
8
-
1389
... More
Supply and fixing of Ammeter with selector switch including all connections
1
-
1398
... More
Supply and fixing of voltmeter with selector switch including all connections
1
-
1398
... More
Supply and fixing of Indicator lamp with toggler switch and fuse
3
-
242
... More
Supply and fixing of C.T coil upto 400Amp including all connections
3
-
860
... More
Earthing Supply and fixing Earthing with copper earth plate 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc (But without charcoal and salt) as required.
2
-
4930
... More
Salt Charcoal for used for Copper Plate earthing
2
-
682
... More
Supplying and laying 25mm X 5mm copper strip on surface or in recess for connection etc as required.
20
-
484
... More
Supply & Fixing of A.C Ceiling fan 48" size. (Make-Usha-Striker/Orient PSPO Summer cool Breeze/Havels velocity)
179
-
2316
... More
Supply and fixing of Electronics step type Modular fan regulator. (Make-Cona/ Anchor/ Usha/Bajaj)
179
-
328
... More
Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor including providing and fixing phenolic laminated sheet steet cover on the fan box etc as required.etc. as required.
179
-
170
... More
Supply and Fixing of Fan Hook
179
-
40
... More
Supply of Exhaust fan 12" size. (Make-Orient Spring Air/ Usha Turbo LD Jet Delux/Havells Ventil Air DSP/Crompton Trans Air 12" )
23
-
1565
... More
Installation, Testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
23
-
553
... More
Supply and Fixing of 20watt LED Tube(Havells/Phillips/Bjaj)
408
-
302
... More
Supply and Fixing of 10watt LED Tube(Havells/Phillips/Bjaj)
26
-
156
... More
Supply and and Fixing of Slim Surface mounted Square 18Watt LED panel Al.diecast body with with premium diffuser to ensure glare free & even distribution of light
102
-
1606
... More
Supply and Fixing of 80 Watt LED Street Light made up of Preessure Dia cast aluminim housing with high power LED As light source with IP66 Protection and IK07 Impact Resistant
12
-
8520
... More
Supply of following PVC armored cables ISI marked.(Make- Glowstar/ Polycab/ Nicco/KEI/HPL/ Mescab 95Sqmm 3& 1/2 Core(With Stand By Cable for UG Provision)
120
-
525
... More
35Sqmm 3& 1/2 Core
30
-
247
... More
P.H.Works:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.
25mm dia PVC ASTM pipe (sch-80) In ground floor
20
-
147.5
... More
In First floor
20
-
153.3
... More
2nd floor (over roof of First floor )
30
-
159.2
... More
32mm dia PVC ASTM pipe (sch-80)In ground floor
30
-
191.9
... More
40 mm dia PVC ASTM pipe ( sch-80) In ground floor
100
-
251.6
... More
First floor
10
-
261
... More
2nd floor (over roof of First floor)
55
-
270.4
... More
50mm dia PVC ASTM pipe-in 2nd floor (over roof of first floor)
100
-
334.5
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge. 20mm dia CPVC pipe In ground floor
50
-
224.1
... More
First floor
80
-
231.9
... More
25mm dia in ground floor
50
-
302
... More
In First floor
70
-
309.8
... More
32mm dia CPVC pipe in Ground floor
30
-
436.2
... More
In Ist floor
25
-
445.1
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall
24
-
44.7
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
11
-
151.3
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
280
-
162.8
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP two way bib cock (Plaza/ Aquatic /Amber make )
10
-
958.7
... More
15mm dia C.P. Health foucet(Plaza/ Aquatic /Amber make )
10
-
555.6
... More
15 mm dia CP Bib cock(Plaza/ Aquatic /Amber make )
14
-
622.1
... More
15 mm dia CP long body Bib cock(Plaza/ Aquatic /Amber make )
7
-
693
... More
15mm dia CP angle stop cock(Plaza/ Aquatic /Amber make )
58
-
565
... More
20mm dia CP concealed stop cock(Jaquar Con 083KN Make )
8
-
819
... More
25mm dia brass or gun metal fullway valve(Shakti Make) IS:778 class-I
4
-
925.2
... More
32mm dia brass or gun metal fullway valve(Shakti Make) IS:778 class-I
8
-
1354.4
... More
50mm dia brass or gun metal fullway valve(Shakti Make) IS:778 class-I
2
-
2550
... More
15mm dia CP flange
89
-
40.3
... More
15mm dia CP extension piece
89
-
59.3
... More
450mm long Grab bar (Jaquar make ) AHS-CHR-1507
8
-
1353.4
... More
Grab Bar (Jaquar )WAC -WHT -BAI090
2
-
6299.7
... More
Sink Cock - Jaquar Make - CON-CHR-349KN
39
-
1353.4
... More
Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge.15mm dia CP revolving shower ( Plaza make )
2
-
605.2
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white
21
-
1479
... More
Construction of 20000 Liters RCC Over head Tank of Inside size- 6.00 X 3.00 X1.50m- In Second floor. Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
16.76
-
7020.3
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
16.76
-
5569.9
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. RCC floor roof, chajja etc
46.25
-
539.5
... More
RCC Beam, Column, wall etc
92.45
-
971.4
... More
Supplying all materials, labour,T&P and providing 12mm thick cement plasster (1:3) over CC work including watering curring and conveyance of all materials to site.
52.2
-
161.6
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. Quantity same as item No-4
52.2
-
32.2
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
60
-
323.7
... More
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
40
-
69.9
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm
3
-
13775.6
... More
DOL Control panel
4
-
3805.5
... More
40mm dia steel short piece
4
-
202
... More
Well cap
4
-
152.3
... More
50mm size CI bracket
4
-
91.3
... More
2.50sqmm flat cable
180
-
128.1
... More
20mm dia rigid UPVC pipes
180
-
6.9
... More
Steel rope with cover
70
-
26.7
... More
32mm dia HDPE pipe
60
-
99.8
... More
Labour charges for lowering including transportation
4
-
2000
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge1 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm open well Submersible pump
1
-
9300
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge 110mm dia U-PVC SWR pipe(Ashirbad / Supreeme )
285
-
316.1
... More
110mm U-PVC door Cross tee
2
-
318.4
... More
110mm U-PVC door tee
10
-
137.2
... More
110mm U-PVC Plain tee
12
-
115.2
... More
110mm U-PVC door bend
16
-
131.7
... More
110mm U-PVC plain bend
10
-
72.3
... More
110mm dia U-PVC 'P' trap
16
-
225
... More
110mm dia U-PVC offset with out ear
10
-
115.2
... More
110mm dia U-PVC H.R. Bend
10
-
186.5
... More
110mm dia U-PVC cowl
10
-
38.4
... More
125mm dia CP grating
56
-
82.1
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge.250mm to 375mm thick wall
26
-
184.7
... More
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
7
-
151.5
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge. 580mm size Orissa pan (Parryware / Hindware make )
11
-
2253
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain (Parryware / Nycer make )
10
-
2612.5
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Stall urinal (Hindware make -60002)
18
-
4616.5
... More
15mm dia urinal spreader
18
-
286.6
... More
32mm dia C.P. dome waste
18
-
128.5
... More
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge Squatting urinal of size 600mmx350mm (Parryware/ Neycer/ Hindware )
6
-
2787.2
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600mmx450mmx250mm size porcelain Sink
2
-
4701.7
... More
450mmx300mmx150mm size porcelain Sink
36
-
1784.4
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge 550mmx400mm size wash hand basin with Half porcelain pedestal (Hindware make -91049+91115)
3
-
7717.1
... More
Counter top basin 560x455 (Hindware / Parryware / Cera make)
16
-
4172.1
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mmx450mm size B.E mirror x minimum 5mm thick
5
-
652.7
... More
Big Size Mirror -
9.15
-
1757.5
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 600x125mm plate glass shelf with CP guard rails
5
-
589.6
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.25mmx600mm long CP towel rail 25mmx600mm long CP towel rail
9
-
692.3
... More
C.P. Ring towel ring
13
-
459.4
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap holder
27
-
173.2
... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge. In ground floor
34.32
-
398.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
7.63
-
4150.8
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
3.82
-
5767.3
... More
In Ist floor
2.96
-
6061.3
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
283.69
-
144.9
... More
In Ist floor Room
210.63
-
148.2
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In Ist floor
68.99
-
155.2
... More
Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
5.91
-
555.75
... More
Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge. Same as CP in First Floor
68.99
-
837.7
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. size 60 x 60 cm Kajaria / fog parla equvalent to be pree approved .In ground floor
76.3
-
1297.8
... More
In Ist floor
58.5
-
1325.8
... More
Fitting and fixing vetrified tiles with matt finish Kajaria ( Duren Marfil / Equvalant) to dados skirting & risers of steps on 12mm tick C.P(1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost conveyance, roylalities and taxes etc. all complete as per direction of Engineer-in-charge. ( 600mm x 300mm size )in ground floor
283.69
-
1489.6
... More
Grinite Tile
4.8
-
2582.1
... More
In Ist floor
210.63
-
1522.6
... More
Grinite tile
44.1
-
2596.5
... More
Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
6.98
-
4559.4
... More
First Floor
6.47
-
4852.3
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Toilet Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding.The Door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like Bathroom locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges. The materials and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards.
56.19
-
8824
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height
3.6
-
423.1
... More
In First floor
3.6
-
476
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
0.27
-
5522.5
... More
In first floor
0.27
-
5545.6
... More
Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
0.36
-
6388.3
... More
In first floor
0.36
-
6682.3
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
(a)Aquagurd Pure Chill 120 PSS UV
3
-
95282
... More
EXTERNAL P.H. WORK.Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia U-PVC Alround Concrete
100.4
-
1012.4
... More
160mm dia U-PVC Alround Concrete
229
-
1650.7
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm
8
-
1351.7
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm
10
-
7722.2
... More
---- do --- addl depth of 0.15m upto 0.90m
5
-
1014.2
... More
RCPC Man hole Cover
10
-
1093.1
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm
10
-
15074.1
... More
RCPC Man hole Cover
12
-
1093.1
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.40m dia x 2.00m deep soakway pit
4
-
18267.1
... More
Construction 1 nos 100 users RCC Septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
59.4
-
199.7
... More
- do - with addl. Depth of 1.5 m
37.62
-
214.4
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -chargeIn ground floor
5.94
-
398.4
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. In ground floor
5.94
-
4150.8
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeIn ground floor
3.47
-
5767.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
27.87
-
6388.3
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge For Roof slab
37.15
-
423.1
... More
For RCC wall
128.4
-
721.7
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
22.3
-
5522.5
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
83.82
-
180.8
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
-
343.1
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
10
-
192.7
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
10.8
-
110.9
... More
Construction of 50 users RCC septic tank- 1 No. Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
27.95
-
199.7
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. 1x6.80x2.74x0.30=5.59
5.59
-
214.4
... More
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
32.8
-
231.2
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
3.08
-
398.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
3.08
-
4484.7
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside)
15.84
-
150.1
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside/outside)
15.84
-
30.7
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height
10.34
-
423.1
... More
R.C.C beams,columns,girder and bressmer etc.
73.5
-
721.7
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
9.39
-
5522.5
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
11.76
-
6388.3
... More
Sinking of 150mm x 50mm dia tubewell through hand boring (water jet ) method (2nos) .Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
1
-
11394.4
... More
Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge
1
-
1320.6
... More
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres
295
-
912.3
... More
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm dia from 0 to 360 metres
295
-
157.4
... More
Reaming 150mm to 200mm dia from 0 to 360 metres
295
-
186.9
... More
Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres
1
-
1464.8
... More
Supplying all labour T&P and grouting with cement slurry for saline sealing in the bore around the 150 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
-
4940.7
... More
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge 150mm dia PVC casing pipe from 0 to 360 metres
50
-
113.7
... More
Cost of 150mm dia PVC ASTM pipe (sch-80)
50
-
1251.4
... More
Cost of 50mm dia PVC ASTM pipe (sch-80)
235
-
311.8
... More
Cost of 50mm dia PVC well screen
10
-
988
... More
Cost of 50 mm dia C.I. cutter plug
1
-
350
... More
Cost of bentonite powder
20
-
298
... More
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge
2.5
-
1574.1
... More
Cost and Conveyance of Gravel
2.5
-
501.5
... More
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge
2.5
-
154.5
... More
Cost and Conveyance of sand
2.5
-
388.85
... More
Supplying all labour T&P and grouting with cement slurry for sanitary sealingin the bore around the upper most 3 metres of 150mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
-
1195.1
... More
Cost of Cement
2
-
490.3
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor
1
-
2036.6
... More
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
1
-
9393.8
... More
Construction of 30000 litres under ground water storage sump Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
35.34
-
199.7
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
21.2
-
214.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
3.53
-
4484.7
... More
Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge
53.5
-
231.2
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height
21
-
423.1
... More
RCC beam,Column, girders and bressmer etc
86.4
-
721.7
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
14.09
-
5522.5
... More
Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
18.79
-
6388.3
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside/outside)
99.4
-
155
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside)
53.8
-
30.7
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
6
-
192.7
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
14.54
-
110.9
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In ground floor110mm dia U-PVC SWR pipe(Ashirbad / Supreeme)
100
-
316.1
... More
110mm U-PVC door tee
5
-
137.2
... More
110mm U-PVC door bend
10
-
131.7
... More
110mm U-PVC plain bend
10
-
72.3
... More
110mm U-PVC Plain tee
20
-
115.2
... More
110mm dia U-PVC offset with out ear
10
-
115.2
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall
20
-
184.7
... More
Supplying all materials, labour, T&P and constructing surface drain of size A-4 type with cement concrete (1:3:6) using 12mm size h.g chips on bed, 1st class K.B brickwork in cement mortar (1:3) inside, 12mm thick cement plaster (1:3) finished smooth with cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
200
-
754.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements