Works Department Tender

PCC M-15 Grade of CD & structure work in sub-structure using 40 to 10mm size crushed stone aggregates mixed laying in layers and compacting in Open Foundation including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M-25 Grade of structure & CD work in diffrent work using 20 to 10mm size crushed stone aggregates mixed, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M25 grade Reinforced Cement Concrete in Foundation complete as per Drawing and Technical Specifications.

RCC M25 grade Reinforced Cement Concrete in sub-structure complete as per Drawing and Technical Specifications.

RCC M25 grade Reinforced Cement Concrete in super-structure complete as per Drawing and Technical Specifications.

Straightening bent up or coiled M.S. rod or HYSD steel (Fe-415 / Fe-500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C. works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete as per approvrd drawing and technical specification and as per clause-1600 of MoSRTH specification for road & bridge works (Latest Revision ) complete in all respect as directed by Engineer-in-Charge.(weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only. Steel bars of only MAJOR INTEGRATED STEEL PLANTS like SAIL, RINL, TATA, JINDAL & SHYAM STEEL, etc. of Fe-415 / Fe-500 grade are to be used in the work & if required original bill of . steel has to be produced by the contractor)

Providing & laying Filter Media with crushed stone aggregates of 45mm size satisfying requirements including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -710.1.4 of IRC 78 & Clause - 2504.2 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing & fixing in position RCC Crash barrier monolithic with M-40 grade of 1100mm height above slab including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1600, 2300 & Clause- 2703 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Gravel backing to revetments with moorum including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause - 2504 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Rough stone dry packing on Aprons and Revetments with hard granite stone of above.003 cum including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause - 2504 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing Weep Holes of 100mm dia using A.C./ PVC pipe, fixing with cement mortar including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -2706 & 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M-30 grade in wearing coat including steel of CD work with formwork using 20 to 10mm size crushed stone aggregates mixed laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1600, 2300 & Clause- 2702 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing, Fitting & Fixing of Drainage Spouts in Deck slab of 100mm Dia including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause- 2705 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Painting two coats with synthatic enamel paints over a coat of primer on any elevation on road kerb, parapet & guard post including cost of Paints & cost of all labour etc complete as per Technical Specifications and Clause-803 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading and compacting to meet requirement of table 300-2 including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause -305 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Construction of granular Sub-base by providing Granular sub-base Grading-VI material as per table 400-1 ,spreading in unifrom layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for road & Bridge works(5th. Revision) .

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blend , By semimechanise method including cost and conveyance of all materials including joint filler separation membrance, sealant primer, joint sealand finishing to lines and grades as per approved drawing and technical specification and as per direction of the Engineer in charge

Providing un-reinforced down jointed M-30 grade cement concrete pavement by semi-mechanized method over a prepared sub-base as per approved mix design using 43 grade cement not less than 400kg /cum course and fine aggregate confirming to IS:383, maximum size of course aggregate not exceeding 25mm, conmpacted and finished in a continious operation inclduing provision of contraction, expansion, construction and longitudinal joints and cost and conveyance of all materials including joint filler separation membrance, sealant primer, joint sealand finishing to lines and grades as per approved drawing and technical specification and as per direction of the Engineer in charge

Providing compacted granular materials in shoulder by using moorum having required P.I. value spreading in uniform layers not exceeding 100mm in depth and compacting with smoth wheeled roller to achieve the desired density including cost, conveyance, royality of moorum & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 408 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Filling foundation and plinth with excavated earth ramming etc complete as per approved drawing and technical specifications as per Clause 304.3.7 and Section 900 of MORT&H Specifications for Road & Bridge works (latest revision) complete in all respect & as per direction of the Engineer-in-Charge.